Find experienced local carpenters in Darling Point

Looking for an experienced carpenter or handyman to adjust and re-align 3 heavy, full-height solid timber internal doors in a Sydney apartment. The job: Re-align hinges/pivots, adjust strike plates, and plane edges if necessary for smooth operation. Manpower: These are heavy doors, but I will be on-site to act as the second pair of hands for all lifting and steadying. Also, there is one mirror door that is not fully closing. See example pictures

Cut a new piece from a new tile. Install tile using silicone tile adhesive

Cut holes in the back of wooden cabinet to hook up cords for amplifier to the record player on top and to outlet the cords from both and cd player out the bottom of cabinet. Some holes.exist but not wide enough for plugs to pass through and we need a new hole cut in back for record player to connect cords to amplifier and speakers.

I have 6 door handles and 3 mortices to install and change. 1) Change only the door handles and turn latch of 2 balcony doors 2) Change the mortices and door handles on 3 room doors 3) Change only the level on a passage door Fix only, I will supply the door hardware.

I need professional carpenter to fix some minor chips on furniture.

I need a woodworker/finisher onsite to assist with finishing veneer wall panels with hard wax oil on site in eastern suburbs. Woodwork experience sanding and finishing preferred. $40 per hour

- 3x built-in bedroom wardrobes (will require removal of old mirrored sliding doors) - 1x dining bench seat - small living room shelving Price tbd - will require site inspection

Looking for a cabinet maker to create measures, design and build a cabinet unit in my living room which provides shelving and panel unit for on the wall tv (wire etc hidden behind panel) which sits above / behind a sofa. Area is approx 4600mm long, 300mm deep and 2700mm high. Understand this needs quote / discussion

I have a stainless shower floor drain and brass elbow that needs polishing and then sikflexing back in place to the hole in the plastic shower sump floor

Marine grade 80mm x 150mm x 30mm Flange for 60mm pipe Flange height 35mm Welded inside and out Bevelled edges 4 countersunk screw holes in each corner M6/8mm countersunk Actual precise design drawing to be provided

Install wall panels and timber veneer partitions, total sqm is approx. 200sqm, need to be finished before end of Jan

We need our old non working/ connected aircon ripped out of our cabinet and for a carpenter to create shelving and space for us to hang coats

Kitchen drawer : timber front panel has come off because a part of old fashioned white plastic 'lug' has broken off the top of 'lug'. Can't seem to find same 2 lugs ( or whatever they're called )anywhere. Unsurprised as could be 15/20 years old hence probably need an older chap with saved old 'bits "!?

Just need a small stain removed from white rug, very delicate

Removal of stain on carpet in bedrooms

Need to have cabinet made for dishwasher Artusi ADWFI451 to be installed under marble bench top Dishwasher dimensions - width 448, depth 550, height 815mm Space to install - width 550, depth 595, height 871mm Need white MDF to match existing cabinet Happy to consider quotes for the job.

Have built in fridge that needs ventilation Install 2 vents, and cut spaces for ventilation in back of 2 shelves. Essentially a jig saw job

Looking for someone to build a timber balcony bar for a curved balcony. - Due date: Flexible

A thin strip of wood approx 10ft neeeds to have glue removed and were fixed and refixed and glued. - Due date: Before Friday, 22 September 2023

Advise on installing wooden flooring Room is 4m x 3m Thinking about buying some floorboards from Bunnings but open to suggestions from the experts. - Due date: Flexible