Find experienced local carpenters in Kensington NSW

Require carpenter to remove garage partition wall & waste. Scope: #1 to remove gyprock wall - 4.1m x 2.3m (with metal frames) #2 Dispose of two doors #3 remove miscellaneous material from ceiling (includes awning, fly screen, 3 bamboo poles and sheeting) #4 Two free standing book shelves Job required ASAP. Please include your earliest availability and price covering labour and waste disposal in your offer.

Laundry joinery — manufacture & install, ASAP. Plans attached. Looking for a cabinetmaker/joiner to manufacture and install a small laundry fit-out from a complete set of dimensioned drawings (plan, elevations, section and cabinet schedule — every unit sized and set out). Scope • Back wall: 1 tall cabinet (665 W), 3 base cabinets (600 W, one a pull-out double laundry hamper), 3 overhead cabinets (600 W) plus 1 overhead (1230 W) over the existing washer/dryer stack, end panels and fillers • Front row: 1 slim tall cabinet (400 W), 2 low drawer units with solid tops (705 W), 1 base cabinet with drawer over doors (600 W), end panels and fillers • 150 mm kick boards throughout (one cabinet left open underneath for a robot vacuum) • Install, scribe to walls and existing column, and level on site Spec • 18.5 mm board, Laminex AbsoluteMatte in Kalamata to all fronts, exposed panels, fillers and kicks • Existing F&P washer/dryer stack and fabric care cabinet stay in place — joinery works around them • Benchtop by others Site: laundry, Kensington ], ground floor, easy access. Room is 4.4 m × 1.95 m. Timing: we'd like this done as soon as possible — please include your earliest start and lead time in your offer. Quote for supply and install please, excluding benchtop.

We are looking for a carpenter to help us build and install custom wooden floating shelves. They just need to ensure they have a pipe finder as one of the walls backs onto our shower.

Looking for a cabinet maker / joiner to manufacture and install laundry cabinetry for a property in Kensington. Would like to install in 2 weeks from now. Materials to be polyurethane in dulux natural white just flat panel doors with no detailing. Plans attached and site ready for check measure. Please note the fabric care cabinet and washer dryer stack on the plans are fisher and paykel appliances that require no joinery or integration (I’ve included an example image for reference) Additionally the red line on the drawing is an end panel.

This deck is sun weathered and needs to be cleaned with oxalic acid, or the like, sanded back a bit and stained with oil, we will supply oil.

Need a custom cabinet made around bed 2.3m x 2.7m approx plus a fair cabinet breadth, will be built around window and bed

We are a building and maintenance company and we require a carpenter to assist with some adjustments and works on approx 20 commercial timber doors that have been installed follow g a fitout, we require some doors to be adjusted and 3M rubbers installed with adhesive. Materials will be supplied, you must be professional and experienced and have all tools. We have on going carpentry work and would like to commence an ongoing relationship with a carpenter for all our building works. You need to be reliable. We can agree on a day rate or hourly rate.

Purchase and cut two pieces of thick plywood as per below sizing: 1. 182 x 92cm 2. 100 x 40cm for weights. Must be thick plywood, then deliver to Kingsford.

I have the new planks roughly cut to size for replacement. Some of the rotted planks have screws (5 mm square drive )with tread partly shredded. So need strong equipment to get them out to continue. Job involves removing and replacing about 13 planks ( from .5m -3m in size).

Need desk and shelves removed . Door to kitchen extended to make room for fridge. 2 x fitted wardrobes etc.. electrical work

Remove the Batu timber paintings and set aside. Remove and replace timber framing with appropriate external framing timber. Paint with dark primer and replace Batu timber pailings. It will involve the removal the existing grey sliding timber doors to set aside until framing is redone. Reinstate the sliding doors.

Joiner, Cabinet and flatpack installer - kitchen Kensington, New South Wales 📍 Location: Kensington, NSW 🔨 Job: Kitchen Joinery – Door & Panel Installation + Minor Carcass Works We are looking for an experienced kitchen installer to refit all doors and panels on existing kitchen joinery, plus carry out a couple of carcass modifications as detailed below. --- SCOPE OF WORK 1. Measure Up (Stage 1) • Visit the property to complete a full measure up of all existing kitchen doors and panels so that we can finalise our order. 2. Door & Panel Installation (Stage 2) • Supply of doors and panels is by us — installer is responsible for installation only. • Replace ALL existing kitchen cabinet doors and panels across the full kitchen including island with new supplied doors/panels. 3. Carcass Modifications (as per architectural drawings) Section A-A (Cooktop/Oven Wall): • Remove the two existing drawer carcasses and fronts either side of the current 680mm oven opening. • Modify the opening to accommodate a new 900mm freestanding cooktop and oven.( we can supply new carcasses) Section B-B (Fridge Wall): • Remove existing upper cabinets in the fridge zone (highlighted in drawings). • Supply and install a filler panel to suit the new fridge opening. • Fridge dimensions: 2134mm (H) x 1064mm (W). Looking to complete this task in july but will need someone to come and measure up soon. Lots of additional joinery work at this property for the right person including; 3 bathrooms - joinery lots of new wardrobe joinery throughout

TITLE: Floor sanding, staining & polishing — residential home Note - work won’t commence until July We're looking for an experienced floor sanding and polishing professional to sand back, stain and finish the timber floorboards throughout our home. The existing floorboards are currently a light/natural timber colour and we need them taken back and restained to a significantly darker tone to match new flooring recently installed in other areas of the house. WHAT WE NEED DONE: • Full sanding of existing floorboards (multiple passes to remove old finish and open up the grain) • Application of a dark stain to match our existing new flooring — we're happy to provide a sample or photo for colour matching • Application of a quality oil-based finish (e.g. Loba, Bona, or Rubio Monocoat) for durability and a rich, deep look • Edge sanding and corners • Clean-up of all dust and debris on completion ABOUT THE SPACE: • Approx 100 m² across multiple rooms — including 3 bedrooms, office, living, dining and hallways • Wet areas (bathrooms, laundry, kitchen) are excluded — timber floors only • Standard single-storey home — easy access • Timber species unknown — tradie welcome to assess on inspection Please provide a quote that includes all materials (stain + finish coats). We'd love to see examples of dark stain work you've done previously. Prefer a fully licensed tradesperson with public liability insurance.

📍 Location: Kensington, NSW 🔨 Job: Kitchen Joinery – Door & Panel Installation + Minor Carcass Works We are looking for an experienced kitchen installer to refit all doors and panels on existing kitchen joinery, plus carry out a couple of carcass modifications as detailed below. --- SCOPE OF WORK 1. Measure Up (Stage 1) • Visit the property to complete a full measure up of all existing kitchen doors and panels so that we can finalise our order. 2. Door & Panel Installation (Stage 2) • Supply of doors and panels is by us — installer is responsible for installation only. • Replace ALL existing kitchen cabinet doors and panels across the full kitchen including island with new supplied doors/panels. 3. Carcass Modifications (as per architectural drawings) Section A-A (Cooktop/Oven Wall): • Remove the two existing drawer carcasses and fronts either side of the current 680mm oven opening. • Modify the opening to accommodate a new 900mm freestanding cooktop and oven.( we can supply new carcasses) Section B-B (Fridge Wall): • Remove existing upper cabinets in the fridge zone (highlighted in drawings). • Supply and install a filler panel to suit the new fridge opening. • Fridge dimensions: 2134mm (H) x 1064mm (W). Looking to complete this task in july but will need someone to come and measure up soon. Lots of additional joinery work at this property for the right person including; 3 bathrooms - joinery lots of new wardrobe joinery throughout

Remove and replace two joiner legs and poles on vuly thunder trampoline. New parts are on site.

Stain the fence posts. Will provide stain and brush. Front fence (one side), side fence (both sides).

Some shutters on a window have come apart and unsure how to fix them

Remove dirt stain from couch

Take off existing bathroom cabinet (mirrored, two door, around 60cm wide x 70cm high x 10cm deep) and install new one with same dimensions.

I need someone to reattach a fascia board that has detached and fallen off. (See photos). The piece is unbroken but is heavy. Length 6.34 metres. Easy access, aprox 2.5 metres above ground.