Find experienced local carpenters in Vaucluse

Installation of the following Ikea Metod cabinets. 1 x wall cabinet 1 x wall cabinet for rangehood. 1 x base cabinet for sink 1 x maximara base cabinet Filler panel adjoining the wall, needs to be cut to size. Attach 3 x door panels. We also need to install the following, please quote separately if you provide this service. ikea laminated benchtop ikea wall panel Sink and tap Dual zone induction cooktop

Qualified Carpenter – Install Timber Door Frame for Double Pantry Doors (Brick Wall) Description: Looking for an experienced carpenter to supply and install a timber door frame for double pantry doors as part of a kitchen renovation. Opening size: 760mm W x 2100mm H Wall type: Brick Doors: Double doors, opening outwards The existing frame has been removed. I need a new timber jamb/frame installed square, plumb and secure, ready for doors to be hung. Important notes: Frame will need to be securely fixed into brick Packed and levelled correctly for outward-opening doors Suitable centre meeting point for double doors (rebate if appropriate) Doors are not required. Please include materials in your quote (or specify separately).

Approx 25sqm of decking needs to be sanded and stained. Potentially fencing too.

Looking for a carpenter/handyman to frame and sheet two small stud/nib walls as part of a kitchen renovation. Build 2 x nib walls in kitchen (after demo) Looking for an experienced tradie to build two NIB walls in our kitchen to box in existing pipework.
Work will be done after kitchen demolition, before new kitchen install. Details: * Nib wall 1: approx 2.5m high x 0.6m wide x 120mm deep - the top 1/3 will need to be plastered/finished for painting * Nib wall 2: approx 2.5m high x 2.4m wide x 120mm deep - will be hidden by cabinetry and so no special finishing required Scope of work: * Frame and sheet both nib walls * Fix securely to floor/walls/ceiling * Please confirm finish level in offer and if NIB 1 can be plastered top 1/3 * Please provide materials Demo is due tomorrow - will upload pics once existing cabinetry is removed.

Remove rotten timber panels from pool filter shed - lift tile panels from this structure and replace with new timber structure and place tile Panels back insitu

Bar stools are too tall for island bench, need trimming

1. Build a timber privacy screen to match or be similar to attached photo (see screen, screen_photo, screen_photo2 images) 2. Build and install three timber frames to hold fixed glass panels. See Frame1-3 images and drawings attached.

Repaint Front Fence and two levels of house Joinery as per Photos. Two overcoats required. Paint supplied . Tasker to provide all equipment.

Assemble flat packed heavy duty shelving units

I have a home-made chessboard made from Fimo clay laid on a piece of chipboard. I want to trim off the outer layer where the black Fimo clay has deteriorated, reducing the size of the chessboard and leaving the intact section.

We need someone to install skirting above and below the kitchen and laundry cabinets and install the bottom base of the laundry cabinet. We do have kickers and skirting from when it was removed. Will need someone to come inspect skirting we have to ensure it’s usable, if not we will buy from Bunnings. Need this quote just for installation cost not supply.

Handyman, carplenter.4 wooden legs cut 40ml from.byo tools. Some shuffling of furiture will be needed. More future jobs will be available if the job is done well. Cheers

We have just had 4 new doors installed. And want to plane the middle 2 pieces of the door back. So that the 2 centre frames on inside of house are flush and flat, so they look like one piece of wood. Please tell me how you plan to make them flush and seamless so they look like one piece of wood. The green highlighted section is part needing to be planed back and sanded. Being painted on Wednesday.

We are needing a Carpenter to tackle three projects. All projects need to be done starting 14th Feb. Ideally both need to be completed in X2 days. PROJECT 1: Replace X4 Doors Plus external doors leading out to the deck. Using entire width of door cavity (not just the two doors) Current door cavity Size: estimate 3030mmW X 2357mmH PROJECT 2: Widen and increase height of internal dividing wall between dining and living room. Height and width needs to match the dining entry wall dimensions, and suitable size for a door to be installed at a later date. See attached PROJECT 3: Add X2 floor transitions to downstairs laundry and bathroom. As the tiles are higher than the floor boards. See attached

I put prewash on my carpet and it turned it yellow. Then I used a carpet stain remover on it. Do you think it is removable? Need it removed

I am building a new home and have bought a large quantity of high quality flat pack joinery (wardrobes and cupboards)from a supplier in China. I need several experienced people to assist in assembly. I will handle installation. I estimate this is several days work for 2-4 people and am prepared to pay an hourly rate or a fixed quote. I'd like to start as soon as possible.

External electricity box is rotten and needs to be rebuilt. Quote needs to include materials. 100cms x 70cms. 2 small doors.

We have a sub floor fan under the floor in our apartment with an access hatch in my daughter’s bedroom. It was laid over with clip together bamboo floor boards. I need someone (preferably a carpenter) to lift them up to provide access to the fan and create a new hatch or easy way to access. She has 3 cupboard doors however I don’t know the exact placement of where the current hatch is. I have some spare boards if required. My I thought it was in the first cupboard near the wall however my ex (the person that laid the floorboards) seems to think it was in the middle of second and third doors.

I would like an experienced handyman to reseal/refinish my outdoor wooden table. It is about 1m x 1m x 30cm. It was originally oiled/stained and sealed, but it was about two years ago and the sealing coating is coming off in places. In other words I think this is a minor job, it needs a resealing or refinishing but not a full staining and sealing from scratch. Please note you would need to bring your own materials (oil/sealant/whatever) please. I will add some images to the listing in a little bit so you can see the type of table/extent of job.

Wainscoting to approx 35m of wall , some plaster walls and rendered walls. Simple design , top rail bead continuous. With approx a rectangle shape per pic below. Top rail is 900mm off floor. The rectangle below will be 600mm wide . Start early October . Price is for labour , I’ll pay for materials. The person needs to come to view and let me know the amount of beading & materials needed. Cheers