Find experienced local carpenters in Clyde North

The wooden supports x2 that hold the cot slats are broken and requires replacement, if you could then attach them

Need to help align each drawer as it is looking a bit crooked. It is from ikea

Need to make some cabinets and benchtop on top in kitchen.

Have got two large and two small timber windows exposed to weather in backyard. It needs sanding, filling and weather proof painting.

Looking for an experienced cabinet maker / carpenter to design and build a custom TV unit and study table for my home.

I need my entrance doors stained both sides. Its double doors and raw merenti wood. Need 3 coates stained including frame. Door size 2340 x 820 x 40 each. I will provide the stain.

Looking for reliable person who do good work Cabinet worker

The kitchen cabinet door has broken off at the joint. I tried filling, sanding & painting before screwing back in- didn't work. Even bought a pair of brand new hinges(Hafele Salice -full overlay 165deg) and repeated the same. Held for 2weeks and has come off. This door is quite frequently used like 5 to 10 times a day. Think I need professional help for a proper long lasting fix. Please see photos attached for the door and the hinge joints. I have a special family gathering at my place on Saturday morning so need urgent help with this - fixed by tomorrow evening please.

Need matching cabinet to existing one. Have added photos for reference. Measurements are: 840W x 770H x 320D Colour: white linen natural laminex Hardware: hettich soft close Need caulking as well

I’m looking for a plasterer or carpenter who can assist with a non-structural renovation. I’d like to extend my walk-in robe by removing a small section of wall. Behind this wall is an existing void, which can be utilised to create additional space. This is a double-storey house, and the walk-in robe is located in the master bedroom on the second floor. I can provide the engineering plans to clearly show the void and confirm that the work is non-structural. If you’re experienced and can deliver a clean, high-quality finish, please get in touch.

Need to change two kitchen cabinets to drawers, each cabinet with the following dimensions: Width: 87 Depth: 56 Height: 64

I need 3 cabinets fitted against the wall in the laundry. We have assembled the shell of the cabinets but the doors still need to be fitted.

1. Cuppboard doors on existing open cupboard (opening 88x35cm) 2. Cupboard between window and existing cainet right side of sink (first picture) (31x65x32cm) 3 Cupboard to go next to existing cupboard and putting on wider L) hand door of existing cupboard (2nd picture)(57.5x65x32cm) 4 Cabinet under basin with shelf and laminate bench top in toilet area (3rd picture) (80x71x24cm) All measurements and colours (to match) will need to be checked prior to quoting

Need an extension on the opposite of existing one

External Entry & Balcony Timber Doors – Sanding, Staining & Weatherproof Sealing Supply labour and materials to restore external entry and balcony timber doors exposed to weather. Scope includes protecting surrounding surfaces, sanding back existing coating, detailed surface preparation and cleaning, application of exterior-grade timber stain to selected colour, and finishing with a UV and weather-resistant clear protective system (exterior grade) to seal and protect the timber. Includes between-coat sanding where required and final clean-up. Finish to be smooth, even, and free from runs, patchiness, or visible sanding marks.

Need a wooden tower with side drawer , flat pack is ready need installer , drawing & all the material will be provided , landrace way Clyde North Need experience person , photo is just for reference need something similar

I have two cabinets that needs to be assembled and have a height chart that needs to be fixed to the wall

I would like to have a laundry benchtop without sink to create bit of workspace.. ideally a benchtop that extends till the end with cavity spaces underneath for washing machine and dryer . If there is space a small broom cupboard too. The existing benchtop over the sink area is white laminate so something similar will do.

Mount Study Desk & Cabinets (IKEA parts) I’ve already built and placed: * 2 x IKEA Billy bookcases * 2 x IKEA Alex drawers * 1 x tabletop I just need someone handy to help finish it off and make it look built-in. Jobs include: 1. Build a simple base/platform for the units 2. Secure everything safely to the wall 3. Attach the tabletop in place 4. Add MDF panels and trim for a built-in look 5. Caulk Actual Photo and inspiration attach

- Need Noggins for stairs timber flex - Cabinetry installation for 1 room - Finishing Cladding installation for Alfresco more than 90% done