Find professional window and door services in Balwyn North

front door has a small stone slab which has fallen off. side path to repair / repave backyard concrete for a quote

Install lily canopia 3x7 canopy (Bunnings) over laundry door, also taking into account cctv camera on wall

I need 3 internal doors rehung on the opposite side. I will supply new standard passage set levers. The existing mortise locks should be filled and glued. Painting will be attended to later by someone else.

$50 to quote the job (not the cost to build it). Looking for an experienced garage door fabricator and installer. Double door width. Perspex sheet light windows. Replacing a window with the garage door. This area was a garage before. Photo attached of rough measurements and style. Beams can be metal or timber.

We are looking for someone to replace 2 doors. You will need to remove the current 2 doors (both external) and place them outside on nature strip. We will supply 2 new doors in standard size (2040 x820 x 40). Painting is not part of this job. You will need to trim the door where necessary , then fit the locks, handles and hinges, and hang them up to ensure the doors open and close smoothly. Please send us your best offer.

I am planning buy a pet door and install it on a glass door. But from what I can see in pet door installation guide, it's need a quare hole not round hole. check thoes links: https://hakunapets.com.au/products/microchip-pet-door#help-me-install https://cdn.shopify.com/s/files/1/0589/9606/4408/files/MICROCHIP_PET_DOOR_-_IM_-_2025.pdf?v=1765499897 My door is a wooden door frame, please NOTE: the image shows my door but it needs to be install to the glass door, not the security door.

3 of our doors need to be fixed- they do not latch or slide well. Also one of the shower door is getting stuck. Backyard door has loose wooden planks and need fixing.

Scope of Works: 1. Provide temporary propping to the existing roof structure 2. Careful removal of existing roller door attached 3. Careful removal of existing brick work, door jam and architrave 4. Supply and install timber lintel and frame work to support gable end of roof load 5. Install new door jamb and architraves for nice finishes 6. Remove and dispose of all associated rubbish on site Structural engineer's design is required

The bottom bolt of door does not come down properly. Door may need to be removed to adjust bolt mechanism. Mechanism appears to be working fine. Also check that door is in working order.

Merlin garage door, the motor makes noise but the door is not moving.

We have swap over a new hatch on our Honda jazz. But it needs to have the proper style glass switch back.

The fly wire has come away from our aluminium screen door and needs replacing.

Looking for experienced fly screen door installer to install fly screen doors at the backyard. Many thanks

I ordered door online, frame is in parts Need help with assembly of door frame and installation

I bought a new rolling garage door opener. I want to use this one to replace the old one.

Hi, I need timber plantation shutters installed on a high void window (estimate 1.5mx1.8m). Because the window is very high, the shutters will require either an extended tilt rod or a long control wand/rod so the louvres can be adjusted from ground level. The goal is smooth control of opening, closing, and changing the angle of the shutters without climbing. You’ll need: • Experience installing plantation shutters, especially on high or hard-to-reach windows • Ladder and tools suitable for void-height work • Ability to provide or recommend an extended control solution When replying: Please include • Your available timeframe • How long the job will take • Your total quote for installation

Double door of size 800*2700 mm needs hung to the frame with hinges.

Hole in wall behind curtain pelmet needs plastering securely as a possum accessed the room and crested the hole . Door in laundry has almost come off hinge and needs securing

There is a hole in the door, looking for someone to fix it so that the colour of it matches the surrounding Also looking for someone to replace the door lock so there is no gap between the door handle and the door. Please quote separately for both jobs if possible

Service garage tilt door. It's squeaky & jumping a little. Probably needs lubricating, spring tensioning and an overall check of the operation of the mechanism.