Find experienced local tradies in Blacktown

Pulled out 2 walls and have to Jsut set the corners so it looks like we didn’t pull it out, need it done asap

​I am looking for an experienced professional or team to supply and install a custom, free-standing, tapered aluminum awning against my existing house wall, extending to the boundary fence. The project is detailed in the attached Finalized Schematic, which contains all necessary views and measurements. ​Key Design Features (please read before quoting): ​Tapered Design: The awning is not rectangular. It tapers significantly along its 3.70m length, from a 1.20m depth to a 1.65m depth. ​Free-Standing Support: The structure must not use the boundary fence for structural support. The low end (at the fence) must be supported by two freestanding, ultra-thin pillars. ​Specific Drainage: There is no gutter on the awning. The roofing must slope precisely so that all rainwater runs down the inside face of the boundary fence. ​Scope of Work: ​Review the attached schematic to understand all constraints and requirements. ​Source all necessary materials (aluminum frame, tapered roofing panels, fixing hardware, and the specific ultra-thin support pillars). Please provide details on proposed materials (e.g., frame thickness, roofing type) in your quote. ​Precisely construct the tapered frame. ​Install wall-mounting brackets to the house. ​Install the ultra-thin pillars. ​Install the roofing panels. ​Ensure the structure is level across its length and slopes correctly for the custom drainage as specified. ​Must have public liability insurance and all necessary tools. ​Attached File: Finalized_Tapered_Awning_Schematic.png (the clean image) ​Dimensions: ​Height at Wall: 2.75m ​Height at Fence: 2.55m ​Total Length: 3.70m ​Projection A: 1.20m ​Projection B: 1.65m ​Please provide a quote that includes all materials and labor for the completed job. Examples of similar past work would be appreciated. The last photo can be used as an example of the colours I want. My budget is a placeholder and I am open to receiving real quotes based on your assessments.

Electrician required – Outdoor Sauna Installation Looking for a licensed electrician to complete the electrical installation for an outdoor traditional sauna. Scope: * Install a dedicated supply for Harvia Vega BC45 4.5 kW sauna heater with Harvia Xenio Wi-Fi control unit CX1704XW. * Approx. 20 m cable run along external wall. * Continue ~3munderground, then ~8 m along the fence to the sauna. * Install appropriate isolator, RCD/RCBO, conduit/underground protection and terminations as required. Connect the internal sauna LED lighting (approx. 10 A). * Check existing switchboard capacity and advise if any upgrades are required. * All work to comply with NSW electrical requirements, AS/NZS 3000 and Harvia installation specifications. * Please include materials and labour in the quote and provide electrical certificate on completion. Total cable route: approximately 31–32 metres. Please quote for the complete installation, including cable/conduit, protection, switches/isolators and labour.

I'm looking for an experienced tradesperson/installer to assess and install a heavy duty pull-up bar above an external garage side door in Glenwood. It will be used for strict pull-ups, kipping pull-ups, toes-to-bar and muscle-ups, so I need someone confident with structural masonry fixings and dynamic/cantilevered loads. Reference product: Rogue P-4 or similar. I have not purchased the bar yet and want advice on suitability before ordering. (See: https://www.rogueaustralia.com.au/rogue-p-4-pull-up-system-au) Key dimensions Door frame: 900 mm wide Slab to ledge below gutter: 2,330 mm Top of door frame: ~2,080 mm Space above frame: ~250 mm Rogue P-4: 1,321 mm bar width, ~762 mm projection, adjustable bracket spacing up to ~1,219 mm Preferred setup: centred over doorway, with both mounting frames completely clear of the door frame and fixed securely into masonry either side Door opens inward Photos attached show the external rendered wall, internal exposed-brick side, and intended position. Please assess masonry suitability, lintel/opening, fixing locations, anchor type, bracket spacing, edge distances and clearance for kipping/muscle-ups. In your offer, please note relevant experience, whether you can supply appropriate structural fixings, and whether you recommend inspection before purchase. Priority: safe installation suitable for dynamic bodyweight training.

Extend the cable over the door level

Hi, I’m looking for an experienced renderer to complete rendering work to the front of a house, including the existing brick walls.

Ceiling of a home office needs to be done, currently mostly covered by plywood. 6x3m sloping ceiling. Make an offer please. Neg.

Hi team, We don't require door entry. Hence we need to close the part in photos with gyprock. No need to do any painting.

Need a gyprocker to fix all these holes in the walls of our basketball facility. Open to offers

Finish Assembly of Flat-Pack Sauna – Approx. 2–3 Hours Looking for someone handy to finish assembling a flat-pack outdoor sauna. Our assembly team started the job but had to leave early. The sauna is already unpacked and mostly assembled, so the majority of the work is complete. Work remaining: * Install the right-hand side panel * Install the front panel * Finish off and check the remaining assembly * Approx. 2–3 hours of work. • Having a second person would be advantageous It’s a relatively straightforward flat-pack assembly job. Instructions can be provided. Tools required: * Battery drill * Approx. 3-foot step ladder * Rubber mallet would be helpful Ideally looking for someone experienced with flat-pack assembly, carpentry, handyman work or similar who can complete the job neatly and carefully.

Looking for an experienced renderer to render the exterior walls of a new two-storey building. Exterior walls need rendering Scaffolding is already installed Site is ready for work Please see attached photos for the current condition Please provide your quote including labour and materials Prefer someone experienced with exterior rendering

We need 5 power points installed! 5 pcs of brushed wall plates, as we want the power points hidden behind the wall for each screen on display We have two existing power points which are 10AMP

We need a portion of our gyprock ceiling replaced. No need to paint it, only install new gyprock, set and sand it.

Install the power point at the back of the house when the electrical box is at the front. It needs to include parts and labor.

Patch whole in wall gyprock around 30cm

Require plasterer for bathroom small sections need villaboard material on site

Looking for an experienced plasterer to extend an existing internal gyprock wall to the ceiling in my living area (see attached photo). Scope of work: Height 2.65m and width 92cm, wall width 12cm * Frame and extend the existing wall from floor to ceiling. * include matching skirting boards as part of your quote * Install gyprock/plasterboard * Tape, set and sand ready for painting. * Match existing cornice and wall finish as closely as possible. * Ensure the extension is straight, flush and professionally finished. * Supply all materials and remove any waste. Requirements: * Experience with gyprock/plasterboard walls. * Own tools and materials. * Please provide examples/photos of similar work completed. Notes: * Internal wall only. * Tiled floor to be protected during works. * Painting is not required (unless you wish to provide a separate quote). * Please quote including all labour and materials.

Replace oyster light with new fitting and install new power point in the internal garage.

Need Gyprock repair, patching and painting for few areas of the house. Also need a kitchen drawer (I have the drawer face) needs to be reattached. I can supply the required paint.

Install a new power point in garage ceiling to power the autmatic door opener.