Find professional sign hanging in NSW

I'm upgrading the battery system on my boat from AGM to lithium and require a licensed marine electrician for consultation and final inspection. Job Details: Replacing 5 AGM batteries with 3 lithium batteries (Victron). New equipment includes: Victron Orion XS 12-12V 50A DC-DC Charger Victron Cerbo S GX & GX Touch 50 Display Installation will be mostly completed by me (qualified DIYer), but I require: Initial consultation (on-site or remote) to confirm cable sizing, fusing, crimping, etc. Final inspection, testing, and verification of the system. Most importantly: Issue a certificate of compliance (or documentation) to confirm the system meets marine electrical standards (AS/NZS 3004.2) for insurance purposes (Club Marine). Timing: Flexible, but aiming to complete the project within the next 3-4 weeks. Requirements: Licensed/qualified marine electrician Experience with 12V lithium systems and Victron equipment Able to provide written compliance documentation Please include in your offer: Your experience with marine electrical work Any certifications or licences held Availability for initial consult and final inspection Estimated cost or hourly rate (I'm happy to discuss depending on scope) Thanks! Looking forward to working with a pro who can help me get this done safely and to standard.

I need someone to install signage for my warehouse. The sign is 3600mm by 1040mm. I have provided photos of the sign and where it will need to be installed.

We need some signage put up on a fence in Caerleon. The signs are on site. They are aluminium framed signs, 6ft x 4 ft and there are two. You need to drill several (min. 4) screws into the sign (maybe 2 each side) and then attach it to the fence via cable ties. The signs are on site now and below are mark ups for where the signs need to go.

I need the sign put on the wall (I have the screws but not the tools). I also need the silver rod on the wall removed pelase. Ideally you will arrive between 9am and 10am to an office in the Sydney CBD. here are the instructions: Here's a step-by-step breakdown of the installation process: Start by selecting the perfect spot for your neon sign. Make sure it's a clean, dry, and flat surface that will allow your sign to be the centre of attention. Carefully unpack your neon sign and remove any protective packaging. We take great care in ensuring your sign arrives safely, so rest assured that it's ready to shine! Before mounting the sign, double-check that your wall outlet is functioning properly and the cable length can reach from the powerpoint to the spot you want to put your sign. Carefully mount the sign to the wall using the provided mounting kit. Follow the included instructions to ensure a secure and stable installation. If you're unsure about anything, our support team is just a phone call away. We're here to assist you every step of the way! Once your neon sign is securely mounted, it's time to plug it in and watch the magic happen. Prepare to be mesmerized by the vibrant glow and the ambiance it creates! Click Here to Watch the Install Video

We need a person who can put posters up on glass surface and install signage. We have the poster ready to be installed.

Need to install 2 signage and 4 LED TV celing mount. Please send me your quote

Hang 2 sign front of building Few floor tiles at front door 2x handtowel dispensers (requires shift of mirror) Hang white board

Install a sign (pictured) onto a brick wall (pictured)

“I need a sign for a tutoring center to be installed at the back of the building, approximately 5 meters above the ground. The sign dimensions are 180 cm by 90 cm.”

We have two vacant frames for two new signs to be installed. The title length will be 'Cxxx Cxxxxxxxxxxx Cxxxxx'. Photos are attached. The signs need to be developed as well. No logo or specific design. Just a normal white background with a standard black font. We are fine with glass, wood or metal. Whichever is durable and cost effective. Please let us know your initial quotes and when you'd be able to do it. It'd be worthwhile to check in person if you're able to install via the existing vacant metal frame. We are located at Pitt St near Wynyard station. If you are happy to quote us, the address and full title will be sent to you. The one on the right is roughly 245cm x46cm x 15cm. The one on the left is roughly 243cm x54cm x 15cm. Must be licensed and able to give a safety certificate confirming the signage is in good working order and all associated safety risks are accounted for.

Glass sign to be hung on concrete wall with bracket and screws

1. Pick Up Sign board 1220 mm X 2440mm from Udesignit, 3/2 Melissa Place, Kings Park NSW 2148 2. Install the sign board at Westview Baptist Church, Corner of Crawford Road and, Coveny St, Doonside NSW 2767 Location of existing sign pole-frame for reference

Signage has been removed due to harsh weather conditions. Need someone to reinstall. Ladder and drill set required for job. Must have experience in the field.

I need 3 signs hung. Stencil is provided.

I need someone with a hand drill to help me hang a sign please

Need someone to reinstall a signage that we took out from old office

We are in need of a skilled sign technician to install individual letters on our building façade. The knuckle boom required for the installation is already on-site and ready to use. The task involves precise placement and secure attachment of the letters according to specifications.

Install a sign on a corner wall. Needs to be 20ft up. You will need to provide fixings and ladder, I will provide the sign. Was previously installed about 15ft high but a reversing lorry knocked it down! - Due date: Flexible

Install signage film on glass doors and windows, appox 3 - 4 areas and each are might be between 3 to 4 m2. Please provide quotation for this job.

We are looking for a team able to install see-through signage 2327 x 1522 two and one 600x 1522 on three windows and install a sign 2m by 1.6m in two pieces replacing an existing Alubond. All are on the first floor, standing on the roof tiles. Access is possible through the window of there of the rooms. The prints will be supplied as I have been producing signage for 30 years, but due to health and age not able to do installations anymore. I can provide photos. The job will be ready for my client early next week. The material will be ready for installation on Friday, 28 or Saturday, July 29th. Please provide the final quote to be able to supply to the customer. Visual link8 g m a i l please come today after 5:30 to verify access - Due date: Needs to be done on Saturday, 29 July 2023