Find a professional sauna installation service near you

I’ve bought an outdoor sauna online and it’s come in about 8 pieces. I just need it installed outside after the slab has been poured. I’ll have an electrician do the mains wiring, but otherwise I need it put together

Looking at installing a AlpineSpa Cabin sauna. Dimensions are 1.96m x 1.96m. Ideally looking for someone to lay the concrete for the Sauna to sit on and then build the sauna afterwards. Electric work not required

I have an older home sauna that hasn’t worked for at least 10 years, and I’m looking for someone experienced with electrical systems or sauna repairs to help get it running again. The unit doesn’t turn on at all it may be an issue with wiring, the control panel, or the heating element, given how long it’s been unused. I’d like someone who can inspect it, diagnose the problem, and advise on what’s needed to repair or replace components if required. The sauna is located in Armadale. I’m flexible with timing weekdays or weekends are fine. Please bring your own tools and testing equipment.

Looking for someone to assemble an indoor sauna. No tools required Here’s a link to watch the assembly: https://heavenlyheatsaunas.com/en-au/collections/australia-exclusives/products/far-infrared-2-person-sauna-aus

I will have had the concrete slab already. I need someone that has had previous experience assembling an outdoor sauna. I can provide assistance.

Looking for a reliable sauna installer to assemble a Revel Aura Indoor 3-person Sauna in Hay, NSW. • Full assembly of Indoor sauna • Sauna will be on-site ready for install • Must have own tools and experience with timber assembly • Professional, clean finish required Ideal for: Someone with experience installing saunas (Alpine, Revel, etc.), sheds, or outdoor cabins. Please confirm your availability and previous experience with similar installs. If successful, there is ongoing work available across NSW with our growing installation network, for both saunas and gym equipment

We need an outdoor sauna assembled for our customer in Port Hughes . This is a 2 person job as the sauna is very heavy. The sauna is flat packed at the customers home now needs to be and assembled according to the video below. Once the saunas is completed The sauna also needs to be siliconed around the edges and windows so no water can get in. You will need to organise the silicone. And connected to the customers phone via the wifi app. Please remove the rubbish for the customer The job should take about 2 hours to complete. Tools required A rubber mallet to tap the walls together Silicone - Black for the frame and clear for the windows Screwdriver for the door handle. The rest of the sauna should just slot together Here is the assembly video of the smaller version. https://youtu.be/uMSDd9JSK94?si=BhHlg_FVDTmND8zu Connecting the app to the customers phone https://www.youtube.com/watch?v=4xokVf34XVw&t=17s Silicone the edges and windows https://youtube.com/shorts/I-Q2Lpv1Vnw?si=8EvzOt79xUpSjMV7 Please let me know if you have any questions Thanks

Seeking a handyman or sauna technician to repair bitumen roof tiles falling off a Ritual Traditional Outdoor 4–6 Person Sauna in Pambula, NSW. Job Scope: • Reattach or secure any loose roof tiles • Fasten tiles using stainless steel screws (as shown in reference photo) • Check all other tiles for stability and secure them as needed • Minor repair only — no full disassembly or rebuild required • Bring your own tools and materials • Ensure a neat, durable, and weather-resistant finish Ideal for: Someone experienced in minor roof repairs or sauna maintenance. More sauna servicing/assembly/installation work available if this job is completed professionally. Let us know your availability and past experience with similar tasks.

Paint exterior wood of outdoor sauna. Oil and paintbrush provided along with drop sheet. Must have painting experience and attention to detail to ensure done correctly and don’t get oil on anything else.

Assemble outdoor barrel sauna and cold plunge on concrete slab. Both come in brand new flat packs with instruction manual.

I need someone to meet my team at our warehouse in Coburg north at 7am, it will be a full days work finishing at around 3pm. You will be in the van with an experienced installer just assisting them with the assembly of flat packed saunas.

$50 per hour, needed for 2 hours min. Help to carry and support sauna panels as we take apart existing sauna and assemble new one. Not super heavy but awkward to do solo.

Construct a inferred sauna 850mm W and 1600mm L

I need some help setting up a ReGen8 Quadro - 4 Person Infrared Sauna. I’d like it done this week, you’ll need some basic tools.

Need help getting this sauna from Glen Iris to Flinders (Mornington Peninsula). Longest piece is approx 1.4 m wide x 2.0 H 7 pieces Can help pack and unpack both ends. To be done ASAP Today

We have a new sauna 2mtr x 2mtr outdoor to install. We have the installation instructions and video. Simple system 4 walls, connecting power to plumbed wiring. Comes with adhesive roof decals for weatherproofing. You must have experience in installing sauna to be considered.

I need an experienced person (or team) to carefully dismantle and reassemble a 3-person Found Space sauna and move it literally next door — about 20 steps away. The job needs to be done ASAP. Here’s what’s involved (essentially the reverse of this video: YouTube link): https://www.youtube.com/watch?v=jgsmWnB5Xfc Steps: • Remove the glass door first (must be done before anything else) • Disconnect all cables from the control box that run through wall cavities • Unscrew the roof • Unscrew and remove front heaters • Lift off the roof • Remove the glass panels • Disassemble the bench and under-bench heaters • Unscrew and separate the back panel You’ll then need to reassemble it in the adjacent room, ensuring it’s level, stable, and the electrical components are correctly reconnected. Requirements: • Must have experience assembling or moving infrared or similar saunas • Must have your own tools and basic electrical understanding • Ability to handle glass safely This is a quick but delicate job — ideal for someone who’s handy with furniture or appliance assembly and available immediately.

Put together a Serenity Full Sprectrum 2P sauna that came in a kit. Instructions on their website.

Assembly of a Sauna EPOCH 2 - 2 PERSON OUTDOOR TRADITIONAL SAUNA

Flat pack outdoor sauna install. Takes about two hours to install. Very straight forward with an in-depth manual and video of how to assembly. Requires 2 people. Only tools required are a drill with Phillips bit and some drill bits and a rubber mallet. Video: https://youtu.be/CZLpZAyKluc Instructions: https://drive.google.com/file/d/1zL5PenILA__nmb9GXHk4m89r1MiFJMlK/view?usp=share_link