Find a professional roller shutter repair in West Melbourne

My electric roller shutter stopped working after it got stuck on something while closing. I could still hear the motor running, so I believe the motor is fine. After opening the casing, I found the shutter had jammed, and while unrolling it manually, one of the power wires came loose from the small 4-pin plug adaptor that connects to the motor. There was a small spark when the wire slipped out. I need someone to help reconnect the wires properly to the adaptor (or replace it if needed) and refit everything back into place so the shutter operates normally again. Photos attached for reference.

2x manual roller shutter cables broken

i believe the roller shutter cables have snapped for both devices

Replace 3 x electrical roller shutter switches with 3 x smart switches. Note1: new switch is slightly different dimension as per photo. May work with existing hole but not sure. I don’t want a new hole in the wall so you need to come up with an option to install in existing. Note 2: quote physical installation only. I don’t need you to configure the smart switch (I will do that myself)

My roller shutter is stuck, it’s one that goes into the eve of the roof. It’s very old, maybe 20 years old since it’s been installed. They are handle operated. The shutter goes down but not up.

Roller shutters appeared to be jammed - springs are loose. Motor works fine.

I have 5 windown want to do roller shutter 2.1m8 x 2m 2 .900x2m 3100x2m 2m4x900

After roller shutters to reduce noise and keep house cool. Maidstone area.

Need help to reduce the noise from roller shutter when its windy! Please explain how you can help

My Security roller shutter has stopped working and will not manually wind open. It is stuck in the closed position

I have a broken roller shutter that needs to fix asap. Will need someone to inspect all other shutters and fix any defects to them. Thank you

Need to paint roller shutter of my shop

Electric roller shutter doesn't open. It’s still makes normal sound without lifting.

Roller shutters / security door for a 4 bedroom house Approximately 10-14 shutters and 4 security doors

Part 1: Roller Shutter Removal o Task is to remove 5 roller shutters from a brick veneer house. o NO rubbish disposal required. I will handle the disposal of the old shutters. o Shutter Type: The shutters are manual (winder) o Shutter Details: 1 x Double shutter, front of house, easy ground floor access. 2 x Single shutters, easy ground floor access. 2 x Double shutters, located under the roof eaves, requiring careful work. Part 2: Eave Repair – no painting required o Supply and install a new, matching fibre cement sheet. o Dimensions of the sheet to be replaced are: 1820mm long x 430mm wide.

Battery operated roller shutter needs repairs or if economical, replace with electric ones. Images attached

We have couple of roller shutters (battery operated) that have stopped working. We need either fixing or moving them to electronic.

Check out 2 roller shutters and repair if necessary

I have a window roller shutter in a double storey home that has ceased. I’m in need of urgent repair.

Need Manual Roller Shutter winder box installed