Find an experienced plumber in Kirrawee

Need to replace the existing cooktop/oven with the improved second unit. When the existing unit is removed, the replacement oven/cooktop is to be installed in the same position. The cabinetry face panel will need to be carefully unscrewed to allow installation and then screwed securely back into place once complete. The existing cooktop/oven does not need to be removed from the property — it is simply being swapped with the improved unit already at the property. Please ensure the replacement unit is installed correctly, connected and tested, with both the oven and cooktop confirmed to be working properly before completion.

The tap connecting to the washing machine is stuck fast. I cannot turn the tap either way.

I’m looking for a licensed plumber or experienced handyman if appropriate to complete two small plumbing jobs in my unit in Kirrawee: * Replace a leaking tap valve. * Replace the dishwasher inlet hose, which is leaking at the tap connection and where the extension joins the existing hose. * Check everything for leaks before leaving. Please include labour in your quote. If you can supply the.required parts that would be good. Ideally looking for someone available this week.

Would like to replace an old free standing vanity into the new one.

Fridge water connection. It previously had a water connection to a past fridge so it has the connection to the mains and the past tube there. The new fridge also previously had a connection so it has the parts from it still attached; just need the two parts connected and working without leaks. See photo attached.

Need a licensed plumber to fix blocked pipe (shower drain/ sewer). The access point is pipe outside (on the deck).

Bought a bidet spray which I need installed. The t-valve location is in a tight space.

As per title, our shower head is leaking

Description: I’m looking for someone with basic plumbing experience to help with two small installation jobs at my home: 1. Install a new shower head (existing one needs to be removed and replaced). 2. Connect a front-load washing machine, including water inlet hose and waste hose. You will need to: • Bring your own tools • Have basic plumbing knowledge • Ensure all fittings are sealed properly and no leaks • Have any additional connectors or fittings if required Both items are already on site — this is purely installation/connection. Location: Kirrawee Preferred time: before 3pm Should be a quick job for someone experienced.

I have 2 taps that have a progressive cartridge, want to change to a mixer tap. Would need to be done without breaking the tiles, but if needed we could access the pipes via the Gyprock behind the bathroom. I'm happy to fix the Gyprock myself if it's needed. This is what the Tap I currently have: https://www.bathroomsalesdirect.com.au/product/ovia-milan-progressive-shower-bath-mixer-round-brushed-gold/. I would like a mixer like this one instead (can be other, important thing is being a mixer instead of progressive) https://www.bathroomsalesdirect.com.au/product/ovia-milan-wall-basin-bath-mixer-with-180mm-spout-brushed-gold/ See pictures of the mixer attached, I've also added screenshots of the specs from the site of the current mixer and the one I would like to replace with (or similar)

Need small kitchen plumbed, toilet installed, bathroom vanity plumbing installed, small hot water tank installed in kitchen. Kitchen will have sink and washing machine in it . No dishwasher. Shower done already.

Need existing sink replaced as it is leaking. Ive purchased a new sink and mixer tap so ready to be installed.

Need help drilling an opening to drain pipe for washing machine drainage - then attach the washing machine drain pipe with a hose clamp. It’s a duplex so need this done for 2 units (next to each other)

My kitchen sink tap leaks. It needs to be fixed properly

The water leak from copper pipe with tap on top. Need either welding or replacing

Plumber needed for two small plumbing jobs: (a) supply and attach a waterline to a new fridge (from existing outlet - see photo); ie. for the fridge’s chilled water and ice maker; and (b) supply and install new piece of pipe under laundry sink that has two inlets for both washing machine and heat pump dryer outflow hoses (the existing pipe only has one inlet - see photo); and connect those two (washing machine and dryer outflow) hoses.

Hot tub outlet has a leak and, although I have purchased a few Bunnings items, the bend at the outlet is too tight to remove. Can a local plumber please pop by this weekend to check it out and offer some advice/tools?

A tap underneath the laundry sink, in a cupboard, has a spare tee which will not fully seal and is dripping. I have a threaded brasshead and plumbing tape but it still won't seal completely. Can someone please seal this? The washing machine may or may not be leaking as well so could this please be investigated?

I've taken the back panel off the back of the freezer and cleared the frozen drain, but we are still getting water on the floor from the fridge. It's a Fisher and Paykel , freezer on bottom fridge, about 350l, that is about 7 years old. We bought it new.

Freezer at bottom of fridge. Ices up and leaks making puddles on wooden floor.