Find a professional mdf contractor in NSW

Cut six mdf boards Cut Length by 20 mm and one side by 3mm

Hey everyone, I’m looking to cover a brick wall with mdf paneling. The section is on top of a kitchen cabinet. The ceiling reaches up to 4m (from floor to ceiling) high however the installion height is about 2m (from on top of the kitchen to ceiling) I have included a picture of the area that needs to be covered with the mdf (highlighted in red) and also a picture of the mdf that will be used

Install mdf VJ board on a hallway & 3 bedrooms.(one wall in each room)

Install MDF wall panels on a brick wall. All materials will be supplied. Area approx (3.5m W x2m H)

MDF headboard over new cupboards Cut and fix and small end closures

Install easycraft panels on two gyprock walls. First wall: 3mts long x 2.65mts height. Second wall: 3.70mts long x 2.65 mts height (excluding cornice including skirting board). The panels click together. One wall has a power point. Pls include the cost of glue and nails in your quote. I provide the panels. The below is a description of the product and a video on how to install. Also photos of the walls and how it should look installed https://www.easycraft.com.au/products/easyvj/ https://www.youtube.com/watch?v=7tcO8yYM0zg

Purchase from supplier, bring to site & install. If it requires painting to also be done

Paint 6 pre-cut MDF Sheets with undercoat than 2 coats MATTE BLACK with ROLLER.

2019 model toyota hiace , one side wall needs wood panels so i can install shelving

I have 3 mdf boards that need to be cut to different smaller sizes. They are currently 90x60cm and would need to be done straight, preferably with machinery (not hand sawn).

Supply and install 5-6m around ceiling. Cornice can’t be installed due to position of manhole to roof space. Will need to be trim moulding or open to other suggestions..

Install 4 mdf panels on 1 wall

This task is to install easycraft vj mdf panels in 2 walls each of 2260mm (h) x 3720mm(w). Photos provided, I will clean up the walls and space before you arrive for the job. There are powerpoints to be cut around at mdf and also each panel is 2400mm x 1200mm, that would be cut too. I purchased the panels already, but you need to bring your tools, nails, plaster and adhesive. No paint is required! - Due date: Flexible

Hi, We're looking to convert our one piece MDF pantry door into multiple smaller pieces for mounting on to drawers. We've already got some IKEA MAXIMERA drawers mounted (https://www.ikea.com/au/en/p/maximera-drawer-medium-white-30271113/), but need the front facade piece cut/made from our existing pantry door. Basically 3 panels at the bottom, the middle but will be left open and the top bit will be remounted as a door. Ideally if we could have holes drilled for mounting as well as a chamfer on the bottom panels for ease of access would be good too if possible. Edging would also be appreciated, if possible. Image attached of panel

Need to trim 2 x MDF kitchen cabinet door, one cut on each. - Due date: Flexible

Cut MDF board (3) to reduce size. See image.

We need the MDF VJ panels installed on one wall in our house (Emerald Hills, Leppington). Sitting wall - width 2.62m - height 2.4m - light switch, power boards, tv point etc.. total 7 points Panels (provided) - 2400x1200x9mm - We have 3 panels from bunnings. - May need cut in length as it seems they are 2.42m in height - Due date: Before Saturday, 19 November 2022

Rendered brick walls 3.4m (W) x 2.4m (H) Bedroom Wall 1 - no doors 2.7m (W) x 2.4m (H) Bedroom Wall 2 - one doorframe 8.0m (W) x 2.4m (H) Hallway wall - two doorframes - Due date: Before Friday, 25 November 2022

Cut MDF board to reduce size. - Due date: Flexible

Install wood into top part of cupboard. - Due date: Before Sunday, 30 October 2022