Find an experienced gas fitter in Canterbury VIC

Licensed Gas Plumber required! Removal of old bbq and installation of new bbq on an existing built in area - old unit has been disconnected - must bring along own tools - refer to photo for details

Remove and dispose of the existing Rheem Stellar gas storage hot water system. Replaced with a Rheem 26L Gas Continuous flow water heater: 50c model The gas connection will need to be increased from the meter from Rp ½ to Rp ¾ The new system is to be located in the same position as the existing, resulting in minimal pipe work aside from lifting the gas / water pipe work by approximately 1.6m The gas pipe from the meter will need to be changed from ½ to ¾ diameter over a length of 5 meters. The photo shows that the surface to be opened is soil and stones. There are no obstructions making it easy to replace the existing Rp ½ gas pipe.

Remove and dispose of the existing Rheem Stellar gas storage hot water system. Replaced with a RheemPlus 295 gas water heater (Rheem Model Number 854295). Pipe insulation is important to reduce heat loss. Thickest closed cell foam suitable for outdoors is required for external pipes. Please specify the make and thickness in your quote. The new system is to be located in the same position as the existing, resulting in minimal pipe work. Further, it will fit the existing foot print and input pipe dimensions. Access is good. Your quote should include all costs and GST.

Cooktop gas regulator is inaccessible. Requires relocation to an easily accessible location in order to complete mandatory gas safety checks as per AS/NZS5601.1.

Heater fan is not turning on, gas is working. Already changed capacitor and not working.

Remove and dispose of the exiting Rheen Steelar gas hot water system and replace with a Rennai Enviroflo AR Series Model EHP340VM. Require a total cost please. I do not qualify for the Victorian government incentive as the property value exceed the threshold. I do qualify for other incentives. Pictures provided show that the new heat bank is able to comply with recommended clearances. The location of the new heat bank complying with the clearance requirements by the masking tape outline in the pictures. The Rheem system to be removed is also shown. The existing switchboard is also shown.

Looking for someone to terminate my gas connection on my spa. We are removing the spa and need the gas terminated, capped.

looking for serviing my gas heater which we have had for 6 yrs, in wall, works fine but makes crakly noises at time.

The gas heater won't ignite, not sure why, brand as show in photo please give quote (include labour & material)to fix it and call out fee if there is any.