Find an experienced flooring expert in SA

Lay some Vinyl Flooring from Bunnings or very cheap Vinyl on a concrete floor. There is 2 small rooms both about 2m long by 2m wide. Maybe I can supply the Vinyl from Bunnings and I just need it laid into position.

I’m looking for an experienced flooring installer to: Remove existing carpet Prepare the subfloor as required Install 8mm laminate floorboards with underlay Ensure clean, professional finish (cuts, joins, edges) ✅ All materials are supplied (laminate boards, underlay, trims if required) ❌ No supply needed – labour only Details Property type: House / unit (update as applicable) Rooms/area: 4 small rooms / approx 36 sqm Location: Blakes Crossing Access: Easy access, ground floor only and single storey Preferred date/time: before 16th January

16m2 room need hybrid flooring and scotia trim layer, have all the supply just need the work done, carpet and room will be removed/cleared prior to installation date

In need of someone experienced at laying sheet vinyl flooring. I have the roll ready at the property.

Install 25m2 floating floor

Need someone to lay approx 52m2 of floating floor boards across one living room and two bedrooms. Will also require quad to be installed against all skirting boards after flooring is laid. Materials will be ready for installation early-mid Jan.

Seeking a quote to install approximately 100sqm of embelton engineered timber flooring t&g. 2100x190x12mm. Concrete subfloor. We are wanting them installed using direct stick. Carpet and skirting boards will be removed by us. Please provide quotes with the glue supplies by you and without.

Need floorboards installed to caravan floor anytime the week of 12th Jan . I have all floorboards and underlay ready to go. No need to supply just install

Flooring installation for my rumpus room. The area is around 5mx4m

Need someone to remove carpet/tiles and install hybrid or laminate flooring which I will supply . Only area is the living / kitchen area where the entrance is.

You need to have tools to install 12 sqm floorboards in the kitchen. Can lay on existing kitchen floor. I have bought floorboards and underlay. Job site: Somerton Park Ground floor unit.

Supply and installing deck at front and back yard

I require laminate floorboards (I will source the plastic and floorboards) to be installed in 1 bedroom. Roughly 11 metres.

Need this flooring installed in a restaurant kitchen in Seaford meadows. Area, About 30 SQM Flooring and welding rods will be supplied. Please let me know if you are interested in doing it. This is Gerfloor Anti slip commercial vinyl Thanks - Due date: Flexible

Subframe done. Deck boards need to be installed.

Hybrid flooring installation for a 5x4m rumpus room on concrete. Skirting boards will also need to be installed.

I have timber look hybrid floors I need to be installed in four bedrooms I walk in robe and a hallway ASAP

I have a total of 25sqm of flooring to be laid over two rooms. One room is a vinyl sheet that will need to be cut to size and done in the kitchen. The other is click clack floors for my dining area.

I need someone to remove my current floor (has laminate flooring with some carpet stickers added) and add new flooring (new laminate floor is fine) and ensure is neat with architrave trimmings. Must take all rubbish with them. Thank you

Please quote price per square meter to lay laminate flooring. Thanks

sanding, polishing and coating of a small kitchen, roughly 7.2 sqm. This is to be done after the existing kitchen is removed and before the new kitchen installed

Looking for a quote to polish garage concrete 6m x 5.5m Adelaide West

Remove carpet from two bedrooms. Sand and apply two coats of finish. Rooms are approximately 4x4 and are furnished.

Hi, I’m looking for someone experienced in epoxy flooring to work on my garage floor (approx. 35 sqm). The floor currently has an old epoxy coating that needs to be removed. Floor needs to be polished and ground to prepare for the new epoxy. Apply a new epoxy finish

110m² brand new floor in good condition

Recently had carpet removed from 2 bedrooms Need floorboards sanded and polished to match other floorboards in house Main bedroom - floorboards in very good condition (see 1st photo) Second bedroom - 2 areas where cement needs to be removed and floorboards replaced there. Priority is to have main bedroom complete. But hoping someone has experience with removing cement and replacing floorboards before sanding and polishing. Looking for someone with experience in sanding and polishing floorboards Happy to negotiate price based on work required

Old small home, carpet has been removed leaving timber flooring to be sanded and polished. Looking at 4 rooms and a hallway which together would be approximately 35 square meters

Some patches of wood has lost color that needs restoration/polished/resending (open to suggestions). I guess those 3-4 small patches can be sanded again (Preferred) or whole floor.

Sand and Polish FloorBoard - Small Area

The job is to sand stain and polish approximately 80 m² of flooring. It’s a level one building in Port Adelaide. The floorboards are Jarrah.

Sand and polish the timber floor

Sand and polish timber floors and put down quad

Sand and Polish floorboards and fix gaps in floorboards

I've had a slate base removed from under a combustion heater and now need the exposed concrete polished to match surrounding floor.

I would like to sand and polish floors in living room and 3 bedrooms. Please send me your quote.

Just checking there is a carpet to be removed

Remove carpet, sand, polish/coat pine floorboards in room 4.3m x 4.4m

polished concrete floor poured and polished? About 20m2 . New kitchen then to be installed on top by another trade. Approximate measurements of flooring area is attached on a ruff sketch Floor base u der .. the current existing floorboards and tiles are mixed particle board and concrete.. I think..!

We just bought a new (130 year old) house in Renown Park, most of the house is floorboards but the main bedroom is carpet on top of ground that was filled in with concrete. The room is 4.32m x 3.64m. ($5 budget isn’t accurate, just not sure what ballpark we are looking at so not sure what to put.)

23m2 of new polished concrete look floors.m for freelance floor polisher. Affordable counter offers considered. As I’m on a budget. Floors will need a thin layer of new concrete poured as I think the floors are particleboard? This I’m unsure of Current floorboards and old tile will be removed beforehand and not included in this quote. $1150 is $50 square metre x 23metrs.

Need someone experienced to refinish 42 m2 timber floor. Completely sand off the current floor varnished vacuum and revarnished with clear varnish. Only on lounge and dining area that I draw yellow. Must start on 13th January. I will supply the varnish The house is completely empty of furniture. Please refer to plan and pictures.

1 bedroom, hallway and living area to be sanded. Carpet will be removed prior with wooden floors premopped. Floor boards look in good condition and clean. But some patches of glue from the carpet underlay.

Removing carpet and restoring original wood floors

Sand and polish timber floors.