Find a fence installation professional in Coburg

Remove existing timber fence and install new timber fence using same or similar timber. Fence size is roughly 10m x 5m, and 6ft tall.

Need a 10.5m, a 3m and a 5m timber fence replaced at my property after fire destroyed old fence. Standard height. Need three separate quotes.

i want to remove the current pickets and replace with new ones. My front fence is about 12 m long. The pickets are currently different heights and i want them to be all the same height as the current tallest picket 150cm. I don't care if the the pickets have a rounded top instead of current pointed top. This includes the small gate that is in the fence, which may need to be adjusted . I will paint it myself, but if you can supply primed pickets that would be great. I need this done fairly soon if at all possible.

im looking for 2 jobs job 1 - install a colorbond fence - 2m high (without sleepers) and 7 meters wide - the previous fence has been dug up and disposed off. job 2 - paint a colorbond fence 40-50 meters with dulux paint

Repair front steps and some design posts to secure it all

Need a timber fence build 1.8m-2m high and 4.2m long . please quote with suggestions of a fence look and also with supply of materials

Wooden gate installation to our driveway, preferably around 1.8m, extending from the dividing fence to the house side. Painting not required. Please see photos for gate type examples and location.

One fence post that is attached to fence on one side and a gate on the other side has started to crack and needs replacing as the gate no longer opens

Rotten fence post. Please see pics

Supply and install rear fence section with pedestrian gate to rear laneway. Approx 6m length.

Fence posts need to be replaced. Need to remove old rotted ones, dig and concrete new ones nice and deep. Rest of fence in good condition. Must be able to work around climbing plant on part of fence and plants in garden.

Timber picket gate, approx 1.2hx1w

Current post is holding up a woven wire gate that is in a 2/3 to 1/3 arrangement. The post is holding up the 2/3 side but is unable to keep the gate level which then prevents the gate from closing properly. Current post is cypress 90x90mm. Tasking is to replace it with a 115x115mm cypress post ensuring that the gates will then function properly. Update 19/11 - I can pre-supply the 115x115 post and will pre-paint it. Please quote on the labour to remove existing and install new at least 600mm deep. - Due date: Flexible

We require an experienced Gate and Fencing Installer for an installation this saturday in coburg. You must have extensive experience in installing gates and fencing. You will be paid on the day with ongoing work available if wanted. Pay rates start from $25.00 an hour and will be determined on experience. You must have your own vehicle to meet onsite Moviated and can do attuide The physical ability to carry out manual Labourer work We would like to hear from you, please get in touch - Due date: Needs to be done on Saturday, 14 October 2023

Location 18 Beckwith Street Coburg south boundary. Conventional paling fence but about 300mm higher than existing.

29M long = 1.95m high timber paling fence - remove, install new fence. easy access ( between 2 house ) - Due date: Flexible

Build /install a simple rapid mesh or similar side gate. Possibly with a small fence panel as it's a wide opening. Maybe a second similar side gate (at other end) depending on cost.

Looking to build a pedestrian and driveway gate (timber) The main picket fence is complete but need the gates as we now have a Labradoodle to keep Secure. Driveway gate approx 2.5m wide 1.5m height Pedestrian gate approx 1.2m wide 1.5m height - Due date: Before Wednesday, 30 November 2022 (neg)

Replace boundary fence that runs betwoon two streets - Due date: Flexible

Existing driveway gate is 50 Years old and the rust has built up making it difficult to use. Multiple repairs has kept it going but now it is due for a replacement Attached photos show existing gate Dimensions are approximately 2.5M across and 2M high Ultimately I'm looking for a white gate that locks. Gate should open wide so that I can drive in the car. Job should be for new gate, new gate fitted, and old gate taken away. - Due date: Flexible