Find a fence installation professional in Brunswick VIC

Hi Airtaskers, looking for a professional / experienced person to repair / rebuild parts of a picket fence with a gate at the front of my house. This may require sourcing the materials, painting the correct colours (we have some council restrictions I think). Current fence - some of it is in good condition but some palings is broken, including the gate itself. I don’t think this job requires concrete work. Happy to answer questions or if you need to visit the property to quote, just let me know. Thanks!

Looking for assistance moving some fibre cement sheets and holding in place while they get fixed to fence rails

Demo and build 6m shared fence. New 1.95m timber fence Only the red part is being replaced Supply of new materials and removal of all old materials.

My fence borders a laneway and my courtyard. The support structures appear to be holding up well and are straight however the palings and plinths are all warped/deteriorated. I do not want to dismantle my screen as it is attached to support posts I just want to remove existing paling/plinths and replace with new The fence is 7.2 metres. Height of palings is 1.7 -1.8 metres. First image is the laneway side which requires repair. 2nd photo is my courtyard screen.

We have a side fence on our back garden that needs repair or replacement. Height 175cm palings Length 720cm The 3 spans are approximately 2m, 2.5m, and 2.75m between the vertical posts. The posts are hardwood and solid and are set into concrete and brick paving. The cross beams and palings are rotting and degraded. You could probably just replace the cross beams and the palings to repair the fence rather than complete replacement.

First task is to repair the gate shown in the pictures. The gate is 80cm wide and the total distance between the walls it sits between is 190cm. As shown in the second image it doesn't fully close at the moment, so the task is to rehang it so that it closes properly. The second task is to supply and install a colourbond fence panel across the same passageway, about 6m away from the gate. The new fence panel(s) will need to be 175cm wide and standard colourbond fence height. On one side it will attach to the brick wall shown and on the other side can be concreted into the ground.

Need to replace existing timber front fence with 1.5m high timber picket fence. Offers should include supply and installation including removal and disposal of existing fence. I can also consider buying the fence myself if that suits better. Will need a manual pedestrian door with lock . I’ll supply the specific lock type and letter box to be installed. Looking for reasonable quotations.

1.8m timber slat fence down side of house needs slats replacing. 15m long. Good access from both sides. Posts in Good condition except for 1.

1.8m timber slat fence down side of house needs replacing. 15m long. Good access from both sides.

We need to have a new gate sourced, painted and installed with existing colonial latch. Will also need to be installed to reduce existing rub as one fence post is on a slight angle. We already have the required paint. May need an extra piece of wood cut and sanded to ensure fence can be installed flush with posts. Cost is not including cost of materials.

Hi there, Can you please quote for the following: The job - demolition, removal of existing fence and build of the approx. 2.6 (as marked on the title plan as 7.27 ft) side boundary paling fence between two properties. The boundary line is not straight. Location - between 58 & 60 Gold St Brunswick Access and build from 60 Gold St side because of tree on 58. Timeline - as soon as possible. Can you please quote for - a 1.8m high wood paling fence and - a 2m high wood paling fence. Many thanks (the budget amount noted is purely to get the quote sent)

timber side passage/garden slat gate needed made and installed. measurement of passage approx. 160cm width. wanting a gate of roughly ~180cm height. nothing crazy just need to keep the dog secure and height for privacy! not really sure about pricing so hit me with your offers :)

Supply and install colorbond fencing and sliding gate. Side fence approximately 4 mts long and sliding gate side approximately 5 mts long.

My wooden fence is missing about a dozen palings. I have bought replacement palings. I need someone with a nail gun to install them. Should only take 15 minutes.

We need someone to make a steel / wrought iron gate for the front of our house. Please see photo. It will be approx 1.2m high and 1m wide. We don’t have any designs.

Installation of front emu wire fence. Front yard is approx 7 meters in width. Posts and rails must be checked out correctly and latch to be installed on gate

Hello. We need our wooden pailing fence between our yard and the next door neighbours replaced (approx 9m). We also need our back yard fence which backs onto a right of way replaced approx 5.2m. This section of the fence has a gate which can be reused.

I need a steel gate to mimic my neighbours and run along my existing gate. First few photos are of neighbours fence that needs to be mimicked. Following photos are of my current fence and measurements. Please provide rough quote if you are interested in doing work. Thank you

8 metres of fence where existing posts are loose and boards warped. Side gate needs to meet the fence securely. 4 posts is the likely requirement.

I need a gate installed pr