Find a fence installation professional in Ashburton

Need help either repairing or replacing the latch on my gate as the gate has moved and it doesn’t latch properly, so the gate swings open. Might need to replace with a different latch so need help figuring out the best latch if so.

1. Reposition Existing Steel Gate Remove existing steel swing gate Relocate gate forward so it butts flush with newly rendered masonry column Relocate the steel gate post on the opposite side to suit new alignment Install new concrete footing as required Re-hang, square, and align gate for smooth operation 2. Install Steel Fence Infill Panels Install existing steel fence panels between rendered masonry piers Panels may require cutting / trimming to size Securely fix panels to masonry/rendered piers (chemical anchors or equivalent) Touch-up paint to any cut or modified areas 3. Cut Driveway & Install Conduit Saw-cut driveway to install conduit for gate motor cabling Install conduit and make good driveway surface (concrete or asphalt patch as appropriate) 4. Reinstall Automatic Gate Motor & Commission Reinstall existing automatic gate motor/unit Reconnect cabling Set limits and align motor geometry Test full operation, safety and remotes Gate must open/close smoothly and reliably Inclusions Required ✔ All labour ✔ All materials (concrete, fixings, anchors, conduit, patch materials, consumables) ✔ Cutting, drilling, welding if required ✔ Alignment and commissioning ✔ Site clean-up ✔ GST included in price

Supply and Install 1.8lm of paling fencing to match/ tie in to existing fence and the garage. Include all material and footings to complete task Power on site

Hi, I am looking for a professional fencer to replace the fencing on my corner block property in Ashburton (VIC 3147). 1. Demolition & Disposal (Must Include) Demolish: Remove the existing low brick wall on the side boundary and the old fence on the front boundary. Disposal: You must remove all waste, including all bricks and green waste, from the site. 2. Supply & Installation Style: Picket Fence (approx. 1.0m height to comply with corner regulations). Finish: Must be painted/stained in Charcoal (or pre-finished material). Measurements: Front: approx. 16.63m Side (Mernda Ave): approx. 12.26m Gate: approx. 2.66m wide (Vehicle access) - Style to match the fence. Total Length: approx. 31.55m (including gate). Requirements: All-Inclusive Quote: Price must include All Materials (fence, posts, gate, hardware, paint), Labour, and Disposal fees (especially for bricks). Insurance: Preference will be given to taskers with valid Public Liability Insurance. Site Details: Corner block, easy street access. Please see attached photos for the current brick wall condition and measurements. Please provide a quote covering the full scope of work. Thank you.

4 x fence extension to be installed to wooden fence. Fence extensions supplied just need installation

Replace and paint 2.1m section of fence: - fence post - top and bottom rails - front skirting board - 22 windsor pickets I need to check if I have the paint at home.

Please put up a 4 posts at a height of 3.3 metre & 4 pools at a length of 3.5 metre that meet at a right angel (see pitcture example). The other phot is where this will go. Coming off the house they will come off the wall and above the awning (shown in the pictures. There will be 4 of them evenly across the top of the awning. We would like the posts to be concreted in and the poles very securely attached to the house please. Presume you would use treated pine & primed ready for us to paint - my budget is inclduign the materials and your labour to finish the profit. thank you.

We need to install a steel fence around our bin area to enclose the area. This fence needs to be able to open up to take out the bins for the bin company to empty them and for security needs to have a latch to install a padlock.

I am looking to install a new front fence for my property and would appreciate a quotation. The design I have in mind is similar to the attached reference photo, including a central gate with an arched entrance. The dimensions are as follows: Left side width: 1,663 cm Right side width: 1,226 cm Gate width: 266 cm Fence height: Approximately 1,600 cm Additionally, the existing brick fence at the property will need to be removed as part of this project. Please provide an estimate for materials, installation, removal of the current fence, and any other relevant costs. I would also appreciate details on the timeline for completion and your recommendations for durable materials suited to Australian weather conditions. Thank you, and I look forward to your response. Kind regards,

I need a boundary fence removed and replaced with a new one. Posts cemented and Treated pine rails and pailings. 19.5m total height 2.1m Easy access, flat boundary fence.

I need a quote for replacing a side boundary fence. Treated pine 1.8m. 45.2m long. I am ready to hire, please send me a quote and your timeframe for when you could complete the job. Easy access to the property. - Due date: Flexible

We are demolishing fence ourselves but need someone with fencing skills to install a standard new boundary pine fence approx 30m - Due date: Flexible

Replace 27m x 1.8m height fence - Due date: Flexible

We need to install our pool fence as per our permit plan. Approx 16m of 1.5m aluminium tube fencing and single gate. All materials are onsite already with installation along driveway and path to be attached to existing aggregate concrete with end returns to be installed into soil (please provide concrete for footing. - Due date: asap in December 2022

we need to side gates installed on either side of our home to control access and provide privacy to backyard (and keep dog in) we are hoping for timber frame, ideally has a door handle that can be opened from both sides and lockable I have attached the side the gates need to be installed but onsite review maybe required to measure and provide quote - Due date: Before Saturday, 12 November 2022

Approximately 10 metres of fence and possibly posts needs to be pulled out and replaced. It’s rotted/deteriorated. Front of house. Rubbish removed. - Due date: Flexible

Need professionals to install new capped picket fence with letter box. Size 13 m x 1.2 m. Evacuate old front deck and install a new one. Size W3.5m x D1.5 m x H0.6 m Brick wall next to the current deck needs to be knocked down.

I purchased a driveway gate which I need help to install. They will swing inwards and slightly upwards due to the slope of my land. I can provide photos.

I have a back fence that is leaning due to four fence posts that are rotten at the base. We would like the fence straightened and these to be replaced. - Due date: Flexible

Adjoining fence between unit 1 and 2 needs to be replaced. Approx 23m - Due date: Flexible