Find experienced local carpenters in Malvern East

Looking for an experienced handyman, cabinet maker, or joiner to repair sections of an under-sink cupboard that were affected by a water leak. The damaged areas are marked in red in the attached photos. Although the leak has been fixed and the cupboard has been drying for several weeks, moisture readings are still showing slight dampness, so we’d like the affected Melamine sections cut out and replaced to prevent future mould or swelling. Important details: * The cabinet is attached/glued to the stone benchtop along the areas marked in blue. * We need someone skilled and confident working around cabinetry fixed to stone tops without causing damage. * The job will likely involve carefully cutting out the damaged Melamine sections in place and fitting replacement sections neatly. * We have already sourced matching board for the replacement pieces. * Looking for a clean, professional finish. Please only quote if you have experience with cabinetry repairs or similar detailed handyman work.

The joinery panel/door on our integrated dishwasher has fallen off and needs to be reattached securely. Looking for someone experienced with cabinetry/joinery or appliance installations.

Require someone to install kitchen cabinets. Cabinets has been delivered .

The front joinery panel has detached from my dishwasher on one side, and the joinery panel under the dishwasher requires securing. Would love some help.

We are putting in a new wardrobe and need to replace a piece of timber which is on the side of our mantle with a different size. The timber piece we need removed is 2.1m high x 15cm wide and we want a new, slimmer piece to just go to the end of the mantle (so 2.3m high x 7cm wide.) We would need the skirting at the bottom trimmed to fit also. Please see photos, happy to provide more info/photos! Price negotiable and if you are a plasterer who could plaster behind afterwards, that would be a bonus!

I require a cabinet maker or kitchen installer to assist with the following: - CNC Cut and two-pack paint 10x 18mm MDF kitchen cabinet panels to match existing shaker cabinet profile and colour. - Shift a two meter run of cabinets and install all the cabinet panels, including on integrated fridge and integrated dishwasher. - Cut down or re-construct an 800x800x400 melamine carcass to fit new integrated fridge cavity. Happy to discuss more detail and share images and detailed cabinetry drawings.

Hi, I’m looking for someone to fully reseal an exterior timber window frame next to my front door. The timber and paint around the window has cracked and lifted in places, and I’d like the entire window perimeter properly sealed, not just patched. Photos attached. Window size: – Approx. 90cm wide x 102cm high Scope of work required: Scrape back all loose or failing paint/sealant Reseal the full window perimeter using exterior-grade sealant Leave the window weather-tight and ready for painting Outdoor job, easy access, small window. Please let me know: What’s included in your quote Whether materials are included Your experience with exterior timber/window sealing Thanks!

We have a blackbutt timber deck that was built 12 months ago. It’s due to a good clean, oil and a whitewash stain (as we have had to replace a few of the boards). Just needs a general check up and care, to try avoid any future damage and prolong the quality and life of the deck. Part one runs: 5m by 6m Part two runs: 1.5m by 10m We are happy to purchase the cutek extreme CD50 and the coulour white wash. You will need all your equipment/parts to do the job professionally. It will certainly need two coats and two seperate visits (maybe even three if needs to be washed and dried first).

We have 6 doors we need trimmed at the bottom from replacing the floors. The 5 of 6 doors are already removed. The doors do not need to be rehung.

Need someone to make two cabinet doors above rangehood . Might need to come out and measure it again if necessary

We are wanting to removed the centre of the exisiting cupboard doors so we can replace it with rattan mesh. This job would be to only cut out the centres, NOT adding the mesh. I have draw in red the area to remove along with the inside images of the cupboards and drawers. The last image is what the final product will look like, hopefully that will help with understanding the task more. Please reach out if you are keen and have any questions. Thanks

Laundry sink, benchtop, and caulking - View all the details of this offer: https://www.airtasker.com/offers/01K94F4DPRXAJR4PV81GSVY7Z0

I’m looking for an experienced furniture maker or carpenter to build a freestanding kitchen island bench for my home. What I’m after: • as close to reference photo attached • sturdy and well-built Approximate dimensions: • 1500mm (W) x 1000mm (D) • Standard bench height (~900mm H) Additional details: • Must be freestanding (not fixed to the floor) • Needs to be level and solid — no movement or wobble • Open to design suggestions depending on budget and material availability Budget: Flexible depending on materials and craftsmanship.

Someone has thrown an egg or a piece of fruit at my house on the front render. I don’t know how to clean off the stain. Need someone to come over and do it with the right chemical cleaner or tool. Very accessible. I have a ladder that easily reaches.

Hi. I have an external facing timber door/window frame that is rotting at the bottom and needs repair - cutting out and replacement of timber (no painting required - I can do this later). Happy to pay extra for timber/materials used.

It's a very large Deck areas that surrounds a pool and Alfresco area. It was laid just over 12 months ago. I require the Deck to be properly cleaned and prepared for staining. I will provide the stain required, and it may require two coats. From the diagram attached, the orange area is 15.6 x 8.2 mtr and the Alfresco area to the left, is approx 5 x 5 mtr. I only want those that specialise in Deck maintenance to apply for this job.

Replace tops of cupboards with flat wood to create a more modern look - remove existing cornices - cut and fit new tops with wood

I’m looking for carpenter or cabinet maker to help transform the space under a study nook into a functional storage area in my apartment. We’d like to install a few custom cabinets in that under-desk space, mainly to store extra kitchen items like pots, dishes, and other essentials. The goal is to make better use of the area and add discreet, practical storage. The space is currently empty where a chair would usually go, and we’re open to your suggestions.

Removal of existing mirror (no cabinet) and install cabinet mirror

Hello everyone, I need someone to make an outdoor cabinet measuring 160 cm by 170 cm, similar to the image provided. It needs shelves inside that can hold a good weight, should be waterproof, and be suitable for outdoor use.