Find experienced local carpenters in Kingsford NSW

We are preparing a kitchen cabinet for an installation of a dishwasher. We have removed the doors of the cabinet. We will require the bottom of the cabinet and top bit of timber to be removed to allow space for the dishwasher. The bottom and top parts we want removed are fixed in tightly and the top part of timber is glued. This may require a pry bar and/or electric saw.

We need to replace the timber balustrades at our house with either new timber or aluminium for the upstairs deck. The timber has rotten and starting to break.

Sand timber seat (1.4m) , as well as small timber deck in children’s play area (1.4x1.4m) and 2.0m narrow connecting timber section.

I need this custom plinth made for my reception at my shop Approx 1100 height and 500 wide with inside compartment for iPad and eftpos etc on the other side. Stone on the top and no LED on the bottom. I have the paint that I can paint it with. I just need the structure made

I would like someone to come and look at our wooden deck area (approx 4m x 5.5m). We have had it sanded and painted in the past and there seems to be some weak planks that might need replacing or reinforcing before we have a party at home in October.

I have what appears to be a section of exterior ceiling or soffit cladding has come loose or is sagging, potentially due to water damage, poor fastening, or structural movement. I would like someone to be able to access the damage, and quote up the repair (or if it part of a bigger issue - to advise). Please note - budget is call out fee only. The job will need to be accessed on site.

The chair has pegs that connect the back to the base, but glue will not be enough, needs screws as well. So you nee to have strong wood glue, screws and screwdriver.

Carpenter required. Must have own tools and vehicle, transport. House Renovation.

I need an experienced carpenter or handyman to repair and replace external timber around my house in Kingsford, NSW 2032. Scope of Work: - Replace damaged timber sections on the roof eaves and fascias. - Repair or replace the wooden access door at the base of the house. - Address any rotting or structural issues in the timber sections. - Ensure all new materials are primed and ready for painting. Material Selection Advice Needed: - I am open to replacing the damaged timber with either: - Treated timber (to maintain the traditional look). - Alternative low-maintenance materials (e.g., composite wood, fiber cement, or PVC). - Please provide advice on the best material for durability and cost-effectiveness. Details: - Photos of the damaged areas are attached. - Please include a quote for both materials and labour. -Let me know your availability and experience with similar repair jobs. Looking for someone reliable, with expertise in timber and material alternatives, who can provide a competitive quote.

Build and install two timber wall shelves, mount a whiteboard under them and reattach slats to wooden bed frame

I’m looking for someone to CNC cut 4 sheets of ply wood. I have the drawing ready and I can supply the ply wood

I’m looking for somone to cnc cut some plans I have for a tear drop campervan It is 4 sheets all together

I need a carpenter or handyman to fit out kitchen cabinet doors. The cabinets are existing and just need doors See pics below

To build an understair cabinet. No drawers or pull outs. Only 2 compartments with 2 doors each (divided vertically as shown in blue highlights on my proposed design drawing). Would be great to add 1 shelf (shown in red line). Would like the doors & the right side panel in semi gloss white polyurethane.

Just moved into a rental property fridge doesn’t fit due to the kitchen cabinet height. Cabinet has a switchboard inside. Need to keep the original doors of the cabinet As it matches all cabinet doors.

Need to rehang a kitchen cupboard door (2300high), change hinges and reinstall door

We have had the old fireplace space knocked out and gip rocked. We now need someone to turn this into a small wardrobe space. 2 small hanging rods and one opening to cupboard space at the bottom.

Gyprock of 2 narrow walls. The space was once a fireplace. Exposed brick. Need it gyprocked/finished.

planter box of 30cm high all around pic 1 is 5m length fence side pic 2 and 3 is 10m length combined pool side - no compliance required as it as the planter is same height as the pool level . pic 4 pool section 5m length wall high is 60cm decking slats ok naural colour pic attached I want to hide the old brick wall and brick flower bed and also the 2 steps to the pool. the 2 steps to the pool area would be in decking I will supply the slats / decking palings. they are 5.7m each.

The dog chewed the edge of the stairs skirting. We need to get it fixed. There is a small area that has been chewed on the left corner (pictured) and also the length of the skirting on the right (also pictured). - Due date: Before Sunday, 10 March 2024