Find a reliable appliance technician in Kew VIC

Hi, I have a Cuckoo rice cooker, model CRP-P1009S. It won't turn on at all — no lights, no display, no response when plugged in. I've already tested the thermal fuse and the regular fuse on the control board with a multimeter — both tested fine, continuity was normal. I suspect the issue is with the switching power supply (SMPS) on the board — possibly the transformer or the filter capacitor. Can you quote me for diagnosis and repair of this?

Rebooking task between Dean and Charlie

4C error on Samsung washer. Cleaned filter but error persisted. Need quick fix. SAMSUNG WASHING MACHINE WW95N64FRPW/SA 01 S/N: 0TSV5ADMC00316X MODEL: WW95N64FRPW

We need a washing machine picked up from Brunswick and then delivered + installed in our home in Kew

Handyman to assist with; 1. Wood post outdoor stairs replace - we will supply wood and bracket. We will paint. 2.install front on integrated Bosch dishwasher. Front from IKEA 3. Install 2 x paintings 120cm H x 150W, 85cm x 85cm

Drum not rolling around - Electrolux drive belt replacement requires

I’m looking for someone experienced with installing front-loading washing machines to swap two machines at my home. Job involves: * Disconnect existing Miele front-load washing machine currently installed in the laundry. * Drain any remaining water and prepare it for storage (secure hoses if required). * Move the Miele to a nearby on-site storage area. * Move my Bosch WVH28490AU washer-dryer from storage into the laundry. * Connect water supply, drain hose and power. * Level the machine correctly. * Run a short test cycle to ensure there are no leaks and everything is functioning normally. Access: * Single-storey house. * One standard step at the front door. * No internal stairs. * Both machines are already on site. Machines: * Existing: Miele W1913 front-load washer. * New: Bosch WVH28490AU Series 6 washer-dryer. Please bring any tools required for disconnecting/reconnecting and levelling the machine. When making an offer, please let me know: * Whether you’ve installed front-loading washing machines before. * Approximately how long you expect the job to take.

Disconnect gas cooktop from gas supply and disconnect copper pipe back to metre at front of house. Pipe goes over top of house, which is two storey, so you'll need a suitable ladder. Pipe to be cut into 1m lengths.

Not sure how to fix this toothbrush. If you have any ideas or know how to do it that’ll be great.

Need a licensed plumber to install an inlet valve/tap under my kitchen sink so I can connect my dishwasher (Solt Solt 60cm Freestanding Dishwasher, White) to the cold water supply. ​ The job includes the following: ​1. Install a standard dishwasher-compatible mini cistern tap / inlet valve onto this existing threaded line. 2. ​Connect the dishwasher's cold water inlet hose to the new valve. 3. ​Test the connection (test the dishwasher) and ensure everything is completely water-tight with no leaks.

I have a brand-new Haier 8.5kg 300 Series Front Load Washing Machine (Model: HWF85KW1) that was delivered today, but the delivery/install team couldn’t complete the installation because my existing laundry plumbing requires a few new fittings. (Haier Australia⁠) The installer advised I require: * New filter/inlet hose (filter pipe) * New water supply connector * New drainage connector/adaptor to connect the washing machine drain hose to the existing waste pipe The existing water supply and drain pipe are already in place. The job is to supply any required standard fittings, connect the washing machine, and ensure everything is working correctly with no leaks. Please: * Supply and install any required connectors/fittings * Connect the washing machine * Test the machine fills and drains correctly I’ve attached photos of the existing plumbing setup. Please include the cost of any standard fittings in your quote if possible.

Asko Dishwasher - Water Inlet Fault (F12) Model: DB12435 Need help to fix issue

Need help properly connecting Bosch washing machine drain hose to under-sink drain. Currently getting drainage issue/error. Cycle almost completes but water cannot drain right at the end Brand new washing machine

Rebooking task between Dean and Charlie

Bosch error e:61 - 03 I've reset the dishwasher settings and this error keeps coming back.

We tried to clear the error code ourselves and cleared some stuff from the filter, but the error code still remains

Install kickboard/toe-kick under kitchen cabinetry around my dishwasher to close a visible gap along the floor line. Task includes: Measure the opening under/around the dishwasher toe-kick area Supply materials (e.g. moisture-resistant MDF/PVC/aluminium trim) and include in quote Cut to size and fit/install securely for a neat finish Must remain serviceable (dishwasher still able to be removed for servicing) I am looking for a professional, tidy result (straight/flush finish), no expanding foam as the main solution. Please bring your own tools To quote: Confirm what material you’d use (MDF/PVC/aluminium) Confirm whether you will paint/finish edges (if required) Your availability this week I can share photos of the gap prior to attendance. Happy to adjust the budget to include materials.

Wifi range extender does not work.

I need my dryer stacked on top of my washing machine. Currently, the machines are still in their packaging. Job requires lifting dryer, fixing stacking kit to washing machine, and stacking dryer on top of washing machine.

Fridge isn’t cold but freezer working fine - was in storage for a while until now