Find a reliable appliance technician in Elizabeth Bay

The seal on our washer/dryer has torn, I've ordered the correct replacement part and need someone who knows what they're doing to install it for us!

The exhaust fan above my gas stove is not working, I suspect it is clogged as I have not had it cleaned since it was installed 10 years agove

Looking for someone experienced with washing machine repairs to replace the rubber door seal/gasket on my Samsung front-loader. I have the new seal.

Need to mount an inbuilt IKEA dishwasher which has come loose from its brackets. I have ordered a new bracket, need someone who knows how to potentially remove the entire dishwasher or attach the bracket and refit the dishwasher onto them.

Fisher & Packel Integrated fridge door out of alignment. Door can’t be closed

Door reversal for a brand new fridge, haven't plugged it in yet. Instructions state the following tools: flat screwdriver, Phillips screwdriver, adjustable spanner, socket wrench and 8mm socket. Medium size fridge 43kgs, can assist myself just don't have tools.

My washing machine door is locked it’s nit opening

A hinge just come off my cupboard and I have fixed it before but I need extra hands to hold it. I do have a Phillips head screwdriver but I’m sure someone with a an electric appliance could do a better job.

Require licensed handyman to replace kitchen range hood. Have already sourced replacement, just require the removal and replacement. No electrical work required, however one small panel of cabinetry will need to be removed to allow power cable to be correctly fed through to power point (refer pics) ** Will only consider licensed operators

Install washing machine - plumb into wall ( we have machine and laundry). 2 girls in twenties that don’t know their doing 😂 $50 max

Hi, I’m looking for someone experienced with Fisher & Paykel DishDrawer dishwashers to diagnose and repair my current unit. Model: Fisher & Paykel DD60SDFX9 Product code: 81215-C Serial: NHG279757 Issue: the dishwasher is not draining properly. There is standing water at the bottom, and when powered on it makes a very loud whirring/fan-like noise. I’ve already cleaned and checked the filter/pump area multiple times and can’t see any obvious blockage. Possible issue seems to be either: * blocked drain path / hose / sink connection * jammed or failed drain pump / rotor / impeller * possible flood sensor / leak fault state I’m looking for someone who can: 1. Diagnose the issue properly 2. Check the drain hose, sink connection and pump/rotor area 3. Confirm whether it needs a drain pump/rotor replacement or another part 4. Repair it if possible, ideally on the same visit if parts are available Please only offer if you have experience with Fisher & Paykel DishDrawers or similar dishwasher repairs. It would be great if you can mention whether you can source parts, and your availability. Location: Kings Cross, Sydney Timing: as soon as possible / flexible

I need to replace an existing hardwired oven and slide-out range hood with new units of the same size

We need a plumber to remove old tap-ware and install new mixer tap on bench (not wall) and single sink. And plumbing to install a new dishwasher. Dishwasher will be installed by builder where we currently have drawers (see photo) needs to be plumbed in.

Assess whether the current freestanding dishwasher can be replaced with built in under bench

The dial inside our freezer is stuck on high and it's causing the fridge to turn off periodically. Looking for someone with the background in fixing white goods to come and sort it for us.

Fisher & Paykel single-drawer DishDrawer is stuck resuming an Eco cycle and won’t start a new one. Details: • Machine powers on normally. • Constant fan noise when it turns on. • Cannot change cycle from Eco. • Holding Start does not cancel the cycle. • Power cycling at the wall does not reset it. • There was standing water in the sump area (filter has been cleaned). • It does not appear to be fully draining. • No obvious external leaks. Looking for someone experienced with Fisher & Paykel DishDrawer models specifically. Likely issue: drain pump blockage/failure or possible flood sensor triggered. Would like diagnosis and repair.

My old 45cm dishwasher has been removed and new flooring installed. A new integrated dishwasher needs to be installed in the same space. Only install is needed by certified plumber

The Start/Pause button on my Euromaid WM5 front loader washing machine has sunk into the panel and can no longer be pressed. The button appears to have physically collapsed inward — the internal switch cannot be reached. Everything else on the machine works fine (power, program selection, display). It just needs the Start/Pause button repaired or replaced so the machine can be started again.

I have an existing ranghood that needs removing. It’s a recirculating type so there’s no ducting to deal with. I have a new one - it’s a different brand but is the same dimensions. Power is to an existing socket.

Need installation of front loader washing machine perm fix required