Hire a professional washing machine repair service in Sydney

Items need to be removed for council pickup: 1. 400 Litres Fridge : Door needs to be removed first 2. Front load washing machine 3. Queen mattress 4. Study table We are on Level 3 . Have Lift access

Fix a washing machine leak - it is coming from the bottom of the machine

Heat pump dryer is currently placed on unstable dryer stand, I need to have it moved from the stand to on top of a rubber mat on the washing machine. Flexible $.

Could you please help repair our washing-machine drain hose under the sink? It has come loose, and the bottle trap also appears damaged and needs replacing. The attached photo should show the issue. Any agreed price would need to include all parts, labour, and a drainage/leak test after the repair.

Looking for an experienced cleaner or appliance technician to perform a deep clean of my front-load washing machine, specifically targeting buildup on the rubber door gasket/seal. Machine Details - Fisher & Paykel Series 9 Active Intelligence, Steam Care - 11 kg front-load washer Issue There is visible staining mainly around: - the lower fold/curve of the rubber gasket - inner rim of the door seal The rubber itself still appears structurally intact, so I’m looking for a thorough deep clean and not considering full gasket replacement. A. Scope of Work 1. Deep clean and disinfect the rubber door seal/gasket 2. Remove visible stain and odor buildup 3. Clean inside gasket folds thoroughly 4. Wipe down surrounding drum rim/door area 5. Run a maintenance/drum clean cycle if required B. Notes 1. Prefer someone experienced with front-load washer cleaning 2. Please bring appropriate cleaning tools/products for stain removal 3. In your bid for the work, please describe below which cleaning materials and detergents you would like to use for the job C. Goal 1. Restore the washer to a hygienic, usable condition without replacing parts. 2. Please include in your bid a comment below: 1. your experience with similar jobs; 2. estimated duration; and 3. which cleaning materials and detergents (brand and product type you would like to use) for the job. Located in Ultimo, NSW.

Connect the water pipes properly to the washing machine, it was not installed properly so water leaks

Connect the water pipes properly to the washing machine, it was not installed properly so water leaks

Unpack and connect LG washing machine and take rubbish with you

I recently got this Samsung 6.5kg top-loader (model WA65...) from a friend who used it with no issues. Since setting it up at my place, it's now leaking/dripping from underneath the back of the machine, near what looks like the drain pump area. Water is currently sitting in the drum — I've stopped the machine, unplugged it, and turned off both water taps as a precaution. Since it worked fine before the move, I suspect something came loose or wasn't reconnected properly during transport/reinstallation — possibly an internal hose, clamp, or the drain pump connection — rather than a worn part. What I need: Inspect and diagnose the cause of the leak Safely drain the water currently sitting in the drum Reconnect/repair whatever's come loose or is faulty Confirm it's safe to use afterward

Need new washing machine installed. Need someone with a large strong wench to unscrew old inlet pump which is tightened under sink.

This washing machine overfills during the wash cycle have cleaned filter set water to low put tiny amount of clothes - still over fills please fix asap

Gasket spring on door got loose, tried reinstalling. Still leaks water. Needs a professional

We’ve just had a new Bosch Washing machine and dryer delivered. The washing machine seems to be setup fine but the delivery guy couldn’t connect the drainage on the dryer as he said it wouldn’t fit in the hole. Previously we had both washer and dryer plumbed in, so wanting someone to come over and check dryer, potentially make the hole in the top of the drain a bit bigger so the dryer pipe can fit in, and just generally check both are connected properly and pushed back as far as possible. Thank you!

I’ve had my washing machine delivered but it hasn’t been taken out of the box or installed I need a plumber/tradie to do this for me, i’m not sure if it will require 2 people as it’s an 8kg machine

1.Need to fit exposed pipe shower. 2. Connect washing machine under a counter in the kitchen

The drain pump filter cap is not dislodging and I don’t have the screwdriver attachment to take off the bottom panel to dislodge the cap manually.

Washing Machine & Heat Pump Dryer Installation Hi, I need a handyman/appliance installer to complete the setup of a Bosch washing machine and heat pump dryer in my apartment laundry. Tasks: • Connect Bosch washing machine to existing water supply • Connect washing machine drain hose to sink waste pipe • Install suitable drainage connection/spigot into existing sink waste pipe (pictured) • Secure drain hose with appropriate clamp/fittings • Test washing machine for leaks and correct drainage Dryer: • Connect the heat pump dryer’s continuous drain hose so water drains automatically • The dryer water collection tank is difficult/impossible to access due to the tight cabinet space, so I would like the dryer set up for direct drainage instead • Test dryer drainage setup to ensure it works correctly Please bring any tools and any small fittings/clamps required for installation. Please review the attached photo and confirm if any additional parts are required before attending. Looking for someone experienced with appliance installation, washing machines, dryers, or basic plumbing. Location: Rushcutters Bay Flexible on timing.

Looking for a licensed plumber quote to install plumbing and waste for a washing machine in my apartment in Potts Point. The washing machine is currently only sitting in the lounge room and is not connected to any plumbing. Scope of work: Extend existing kitchen water supply and waste plumbing. Run the plumbing through the wall from the kitchen area into the lounge room. Position the washing machine on the right-hand side of the fireplace. Install the required washing machine water connection and waste outlet. Advise on the best concealed route before cabinetry/joinery is installed. Ensure the work is suitable for an older apartment building. Photos and floor plan can be provided. Licensed and insured plumber only please. Location: Potts Point NSW

I have a washing machine that was installed and forgot to take the transit bolts out of. The unit is approx 70 kg and will need to be lifted straight upward about 1.5m to get them out.

We moved house and the hose of the washing machine is too short. New hose needs to be connected and washing machine installed.