Find an experienced gas fitter in Sydney

Rebooking task between Jo and Hassan

Changing from gas to electric oven and need gas point disconnected and capped downstream of the gas ballvalve

I have a bosh gas hob and the igniter stopped working.. currently, I use a lighter to turn on the hob and I want to fix the igniter. I will pay for the parts on top of the listed price.

I have a small single-burner gas BBQ that won’t ignite. The igniter clicks and I can smell gas, but it doesn’t light. It previously had a grease fire a few months ago and hasn’t been used since. Looking for someone budget-friendly to: • Inspect the BBQ and confirm it’s safe • Clean the burner and internal parts • Check or fix the igniter • Reset/check the gas regulator and connections The gas bottle may also be low — if that’s the issue, I’d appreciate help replacing or swapping the gas bottle, as I don’t have a car. If the gas bottle needs to be replaced i’d pay for that separately. Any cost of parts would be separate / I’ll pay for directly BBQ is located in Surry Hills (on my balcony) Please share your price, experience, and whether you can help with a gas bottle swap if needed.

I need a licensed gas fitter to replace a small stove in a restaurant kitchen. It's a like-for-like replacement, same gas point. Please confirm license, availability, and quote. Thanks!

Im looking for a gas fitter to inspect and fix a gas issue with a commercial deep fryer in a food trailer

My gas bbq was converted to mains supply years ago. I now need it converted back to lpg. I have purchased the required parts from the manufacturer. It is an ‘Everdure by Heston Blumenthal’ bbq

Spilled oil on the gas stove. All of the burners are working except for one, as it got filled with oil. Externally now oil free but need help cleaning it internally as there is still excess oil which prevents the burner to remain the flame when igniting.

Replace gas stove. Replace electric oven. Both new ones already purchased. Location Ultimo NSW 2007

have gas leak/smell at terrace

Hi, I’m looking for a licensed gas fitter to safely disconnect and cap an existing gas cooktop. The cooktop is currently installed and access is clear. Please confirm whether removal and disposal of the existing cooktop is included. The apartment is located in Pyrmont, within a strata building, and parking is provided on site. Looking to have the work done during the week of 29/12 to 03/01 ideally Please let me know your availability and whether a compliance certificate is provided. Thanks!

Gas connector not sealing where it connects to the gas bottle

I need to replace my faulty smeg gas cooktop with my new gas cooktop. The dimensions are similar.

Connect new Weber bbq to existing gas line

Need a licensed plumber to cut out a copper gas line that was feeding dryers. You can keep the copper too. It’s about 8m long

1 gas stove not lighting, the switch can be turned both clockwise and anticlockwise

Install a new gas hob into exisiting hole in the worktop. Old gas hob already removed.

Replacing gas to cooktop should just fit in the bench but bench may need cutting. It is the correct size.

Uninstall existing gas cooktop Install new gas cooktop Removal of old cooktop not required Must be licensed

I have an existing Fisher and Paykel cooktop that I want replaced with a new Westinghouse hob (same size).