Find an experienced gas fitter in St Kilda VIC

Seeking reasonable quotes. Exposed PEX gas pipework identified. Pipework not protected by an approved metallic upstand /sleeve as required. Installation does not meet AS 5601.1 requirements. PEX gas pipework must transition to a compliant metallic upstand where it emerges above ground or from a wall/floor penetration to protect against UV degradation, physical damage, and ignition exposure. Engage a licensed gasfitter to install a compliant metallic upstand at the point of emergence. Pressure test pipework following rectification to confirm integrity. PEX gas pipework identified without required lagging / insulation. Pipework exposed in a location where thermal protection is required. Installation does not meet AS 5601.1 requirements for PEX pipework protection in the affected area. Engage a licensed gasfitter to install compliant lagging to the affected PEX pipework. Lagging material to be appropriate for PEX gas pipe and securely fixed per manufacturer specifications and AS 5601.1. One issue at ground level, the other on the roof.

Rectification of pipe work at the meter and replace lead U bend.

We require a licensed and insured gas fitter to attend a residential property in St Kilda to safely disconnect an existing 54cm freestanding natural-gas oven and stove. Scope of work: Disconnect the existing appliance from the gas supply Safely isolate and cap the gas connection Test the connection to confirm there are no gas leaks Leave the existing appliance ready for removal by the new appliance delivery team Provide an invoice and evidence of the appropriate gas-fitting licence Provide any required compliance documentation following completion The appliance does not need to be removed or disposed of, as this will be handled separately by the delivery team. Please include all labour, materials and Airtasker fees in your offer. Kindly also confirm your availability and whether you can return on a separate date to connect and commission the replacement gas appliance. We will need you to re-attend the site to connect the new appliance - Westinghouse 54cm Freestanding Gas Cooker + Grill - White Model: WLG510WCH Ipn: 835081 Quote for both in the comment!!

Seeking a licensed gasfitter to decommission and take away a Rinnai Energysaver flued gas wall furnace from my apartment in St Kilda. Photos attached showing the unit inside and the balanced-flue terminal on the external brick wall. Scope: - Isolate supply and disconnect the appliance - Cap the redundant gas branch at the nearest practical accessible point (not just the appliance stub) - Pressure/leak test the remaining gas installation - Lift the heater off its wall bracket - Seal the redundant flue internally: trim the ducts back flush, pack ducts and the annular gap with mineral wool, and seal airtight with foil tape and sealant — not expanding foam alone. Finish flush or slightly recessed, ready for plastering. External terminal stays in situ as the weather seal - Remove and dispose of the unit (mostly metal, suitable for scrap) - Issue a Victorian plumbing compliance certificate for the gasfitting work Not required: - No external work and no ladder — the flue terminal remains on the wall untouched - Making good — I’m handling all plaster repair and painting myself Details: - Unit is plug-in via a standard power point, so no electrical disconnection needed - Easy internal access at floor level - Around 1–1.5 hours on site, plus cartage - Flexible on timing, weekday or weekend Please include your gasfitting licence number and confirm the compliance certificate and sealing materials are included in your price.

Gas oven needs disconnection. Oven is no longer required. Oven is supplied by gas line running to base of oven. Need oven disconnected and gas line capped by a licensed gas fitter.

Electrician required for Gas and Electricity check for 2 rooms apartment

I have an older gas oven which generally works well but I'm about to let my apartment and the gas hobs and oven could use a tune-up so they ignite slightly more reliably. Must have gas fitting license.

Certificate of compliance required for one gas stove that’s already been installed for many years we’re renting out the property and we just need a certificate for the insurance documents non-labour costs will be paid for directly i.e. $40 for the certificate

Looking for plumber for regular gas safety check for real estate agency. Will have volume of regular work. Need someone reliable, timely and preferably sole trader.

Gas heater has recently been capped off and removed but the flue is still in place. I would like the flue removed.

Looking for a licensed gas plumber to install gas connection and venting for a dryer in our garage. Job must be fully compliant with Energy Safe Victoria (ESV), including application, inspection, and commissioning.

Need to disconnect two deep fryers and one grill connected to gas line and put plugs on

I need to do 4-5 gas certification for tenants. All in the same location. Cook top and hot water in some. Can do all in same time.

I need a licensed plumber with gas fitting endorsement to attend my property and: • Inspect the gas meter and isolation valve • Check the reason the gas supply has been turned off and tagged out by the service company • Confirm whether the supply can be safely reinstated • Advise if the issue is distributor-side (e.g. meter or regulator) or internal plumbing No appliance work is required. This task is limited to inspection, compliance checks and advice. Licence Requirements • Current Victorian plumbing licence • Gas fitting endorsement required • Please include licence number in your offer Property Type Residential / Unit Location StKilda

Need licenced plumber to connect gas oven and check hot water.

The gas to an existing gas fireplace has been capped off. I need the fireplace pulled out and the vacant space tiled to make the area ornamental as I do not want to replace it with another fireplace. The photo with the gas heater is what it currently looks like. The other pictures are what I want it to look similar to. I want the tiling to match the current blue heart. The chimney will also need to be sealed to prevent water damage. The fireplace is 65 x 63 so quite small.

Need a new Gas Cooktop installed

I have a Canterbury Freestanding gas heater and it suddenly stopped working. It just keeps doing 4 beeps and turning off. Looking for someone to call out and fix it.

Task: Remove Old Gas Oven & Install New One (Licensed Gas Fitter – VIC) Looking for a licensed gas fitter in Victoria to: • Remove and dispose of existing freestanding gas oven/stove (standard 54 cm unit) • Install and connect new Euromaid EFS54FCSGW 54 cm upright cooker (natural gas) • Issue a compliance certificate as required under VIC regulations Details: • Easy access – first-floor apartment with one internal flight of stairs • No kitchen modifications needed – new unit is same size/type • I’ll coordinate delivery to suit your availability • You must handle safe removal and disposal of the old unit • Job must be completed to code and include testing and certification Please include your license details and total quote (including disposal and compliance certificate).

Need to disconnect Chinese double wok gas burner, and recap the gas connection.