Find a professional door frame fitting service in London

Weekend work. We are looking for an experienced decorator or handyman to prepare five internal door frames and their surrounding architraves, on both sides of each doorway, ready for painting. Most existing paint has already been stripped back using professional paint stripper. We used Peelaway 1. There is some stubborn paint remaining that will need attention. There might be high alkaline content due to the chemical used. Work required: * Thoroughly smooth and prepare all five door frames and architraves on both sides. * Remove any remaining paint, loose paint, rough patches or stripping residue. * Fill minor imperfections, dents and uneven areas where necessary. * Sand filled areas to achieve a smooth, even finish. * Leave all surfaces properly prepared and ready for priming and painting. * Clean up thoroughly and remove all dust and waste generated by the work. Health and safety: As the property dates from the 1930s, there is a possibility that older paint layers may contain lead. The person undertaking the work must assess this risk and use appropriate safe working methods, including suitable dust extraction, containment and PPE. Dry sanding of potentially lead-containing paint must be avoided. We also need to consider that we have two cats in the property so we need to keep them safe also. Important: * This is a preparation-only job. No painting is required. * You must bring all your own tools, equipment, fillers, consumables, protective coverings and appropriate personal protective equipment (PPE). * Surrounding floors, walls and furnishings must be protected throughout. * The £200 budget is fully inclusive of labour, materials, equipment, safety precautions and all other costs. * We’d like a professional, smooth, paint-ready finish, not simply a quick sanding down. Please only respond if you have relevant experience and can complete the work safely and to a high standard.

Remove the existing sealant around my front door and replace it with a new sealant

Our garden/outbuilding door does not close fully or stay properly shut. The upright section of the frame appears loose against the brick wall and moves when the door meets it, preventing proper alignment. Photos attached. Looking for an experienced handyman or carpenter to: • Check the frame and existing fixings. • Realign and securely fix the loose upright to the brickwork, with suitable packing and fixings. • Make any minor latch or hinge adjustments needed so the door closes and stays shut. We want a practical repair to the existing door and frame. No replacement or major refurbishment required. If rotten timber or damaged brickwork prevents a straightforward repair, please explain before undertaking additional work.

Door frame construction and door hanging

1. Draught Proofing & Soundproofing Issue: There are large gaps around the wooden door, allowing wind, draughts, and external noise to pass through. Requirements: • Seal all gaps around the door frame and edges • Install appropriate draught-proofing (e.g. seals, strips, or brush fittings) • Improve sound insulation to reduce noise transfer through the door 2. Letterbox Internal Cover (Draught Excluder) Current State: There is already a letterbox installed externally. Requirement: • Install an internal letterbox cover with flap/springs so it closes automatically • Should reduce draughts and noise coming through the letterbox • Clean, well-fitted finish Outcome • Reduced draughts and improved warmth retention • Noticeable reduction in external noise • Functional letterbox installed

Please note. Need a very skilled handyman. My doorframe has been damaged due to forcefully trying to push the chair into the door. Leather is delicate and has been damaged quite a bit due to this. The chair is extremely wide. Therefore the door will need to be taken off the hinges and the sofa will need to be shimmied through the door. THIS IS A 2 MAN JOB.

We have a pub - the cellar door to the cold room which is a double door - the wooden frame is off - can this be reattached so the doors close and lock properly again. Nothing needs to be replaced - just repaired

(1) Re-attach a door frame fascia (front and back) and skirting board following their removal for a plasterboard repair. It will likely need a combination of nails and adhesive. (2) Fix a wardrobe door that persistently falls off its hinges. The chipboard of the door is crumbly so may need fixing plates.

Need to be good with wood because the door handles would need to be fitted and the door frames would need to be prepared to fit the handles there’s potential for other jobs but that is the current main priority

To undcrew the door and remove one part of tine door frame behind the door on Sunday and put everything back on Monday (after washing machine is replaced)

I need to fix the wooden door frame

Fix a splintered internal (bathroom) door frame after door was forced open

1 area with small chipped wall & plaster scrapes, 1 small hole from door handle (4 x4 in x 2 in high, or 10.5 cm × 10 cm ) and door frame crack

Replace (help us source and measure door frames) and get doors replaced. 2 door frames. 4 doors

Kicked in door frame needs repair

Internal FD30 fire door replacement & damaged frame repair I’m looking for an experienced door fitter/carpenter to remove and replace an internal fire-rated door and repair the existing damaged door frame. The existing door/frame has been damaged when I had to force the door open. There is broken/chipped timber around the latch/strike area of the frame, and I need this repaired and made good before/while fitting the new door. Work required: * Remove existing door * Assess and repair the damaged door frame, particularly around the latch/strike area * Make sure the frame is solid and suitable for the new door * Fit new 1981 × 838 × 44mm FD30 fire-rated door * Fit 3 × 102mm fire-rated hinges * Fit 76mm ERA nickel tubular latch * Fit the new strike/keep plate supplied with the latch * Refit my existing door handles, if suitable * Ensure the door is correctly aligned and closes/latches securely * Fit the supplied intumescent seals as required I have already purchased the door and all of the above hardware, so I’m primarily looking for labour and any additional materials required to repair/make good the frame. Important: The frame repair is an important part of this job. I’m looking for someone experienced with door-frame repairs/making good as well as fitting FD30 fire doors, rather than someone who only hangs doors.

I have 3 internal door frames that need to be replaced

Replace the door frame and paint the inside

Front door sagging, door frame needs reinforcement to take the weight of the door

I need a new door frame As the existing one is rooting and needs replacing Door needs n new frame to rest on. It will need to be painted black The door is heavy so it will need assistance to move because it has glass on top of it. Materials needs to be brought for this job