Hire a professional washing machine services near you

The integrated door in our washing machine and dryer does not seem to be aligned, I need someone to fix this including fixing some end panel board to look polish.

The washing machine door latch needs to be replaced. Washing machine model: IWDE126. The door latch is faulty, and currently the machine door does not close properly.

my washing machine keeps flashing everytime i press start and i’ve checked child lock and the doors and it still won’t wash

The unlock button of the washing machine has got a plunger inside which has apparently went inside the machine

Washing machine needs fixing - won't spin, likely as water not draining properly. Done some initial investigation but now need a professional. Machine will need pulling out of its position which will be difficult. Machine: Indesit IWDD washer-dryer (7kg + 5kg) Symptoms • Won’t spin. Spin-only cycle: timer counts down but motor never engages - no sound, no attempt to turn. • Drum rotates freely by hand. • Door lock engages correctly (single click on cycle start). • No error codes displayed. Diagnostics performed so far 1. Pump filter cleared. Removed kickplate, drained via filter, found a significant plastic blockage inside. Removed it. Impeller inspected — looks intact, spins with magnetic detents (normal). 2. Spin re-tested after filter clean - still won’t spin. Empty drum, so not an imbalance issue. 3. Drain/rinse cycles confirmed pump runs - humming/whirring audible for ~30 seconds. 4. Tilt test revealed water still sloshing in drum despite pump running and filter being clear. 5. Rinse + spin cycle attempted - significant water came out via filter afterwards, confirming pump is not fully clearing the drum. Best Guess So Far Pump runs but flow is restricted. Spin is then inhibited by the pressure sensor detecting residual water (safety interlock), which explains why the motor never engages. Possible causes: 1. Blockage in the sump hose (corrugated rubber hose between drum and pump) - possibly secondary debris from the original plastic blockage. 2. Damaged impeller blades not visible from filter side. 3. Weak/failing drain pump. Not yet checked • Sump hose (would require tilting machine). • Pressure sensor / pressure chamber hose. • Motor carbon brushes

Put tumble dryer on top of washing machine. I have the right connection kit for the dryer to stand on above the washing machine.

Move the washing machine to the right into the integrated fridge space, including disconnecting and reconnecting water and waste, extending hoses, and drilling the cabinet for access as shown in the picture.

I need to mount a washing machine door on a washing machine.

Looking for a plumber to install a proper cold water feed valve for a washing machine. There is an existing cold water pipe in place, but it does not currently have a standard threaded outlet suitable for a washing machine hose. The job is to fit a suitable isolation valve with a 3/4" threaded connection. The waste pipe is already in place. Access is straightforward (see photo).

Washing machine belt recently replaced but moving out of position and causing a rubber smell, need someone to diagnose and fix.

Washing machine drain requires unblocking by specialist (currently causing leak into downstairs flat ). Flat is in London bridge

Received a new washing machine in my new flat need help to install it.

I need a section of the skirting board in the kitchen cut out to be able to remove the washing machine which is currently integrated so we can install a freestanding one. need the sides where it has been cut left neatly and not rough.

Hello, I need a washing machine connected, it's in a new building. The wash pipe and waste pipe. I have a few pictures to give you an idea. Please I need this task completed.

Please can I have an assistance connecting a hotpoint washing machine.

Brands new machine has been purchased just needs to be connected safely. This is a quick job as it’s just been purchased and I don’t want to do it myself and do damage

Washing machine leaking, unsure why

Washing machine SMEG WDI14 C7

washing machine door sealant replacement PROFESSIONALS ONLY I already have the part Only labour needed to fit part

Disconnect old washing machine then connect new machine