Find professional underfloor heating installation in Central London

Fill in a short form and get free quotes for local underfloor heating installations in Central London

4.0

Great rating - 4/5 (13330+ reviews)

Looking for underfloor heating installations?

  • Electric
  • Hydronic
  • Whole-house
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated Underfloor Heating Installation experts near me

Recent Underfloor Heating Installation reviews in Central London

Anthony was brilliant - he kept me up to date with what was going on as he went about working, he was really careful about keeping things tidy and did all he can to recommend next steps. He fixed the initial issue with my boiler and uncovered some new issues which he also did everything he could to solve. Couldn't recommend him more

Issue with boiler - no heating or hot water

£50

Efficient, very helpful and polite

Check thermostat and underfloor heating

£100

Outstanding service from Amin. Very punctual, clean, and great attitude to getting the job done. Would certainly recommend

Fit 3 new bar radiators and re-pressurise heating system.

£180

Chris installed new thermostats for my underfloor heating and 2 dimmer switches. He was very efficient completed the job quickly. Would recommend him

Replace 2 dimmer switches and 2 thermostats - heating engineer

£80

Very happy with his work. Highly recommended and will use again

Underfloor heating not warming up

£50

Efficient, reliable, responsive and effective. Thanks Jordan!

Troubleshoot Nest heating control system

£100

What's the average cost of a Underfloor Heating Installation specialist in Central London

£85 - £165

low

£85

median

£120

high

£165

Low, median and high bar chart distribuiton

Average reviews for Underfloor Heating Installation Services in Central London

based on 45 reviews

4.93

43
1
1
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

77+

Tasks successfully completed

2

Average amount of offers per task

33

 mins

Average time to receive offers

Suggested reads about Underfloor Heating Installation

What do underfloor heating installation services include?

Apart from roof and ceiling insulation, underfloor heating is another way of reducing your energy consumption and electricity bills. For a quicker installation, it's best to get someone who knows their way to almost any make and model from various underfloor heating companies. From assembly and installation, plumbing and electrical works, as well as final inspections, they can help! 

Keep in mind that underfloor heating experts can only provide minor screeding. Consider hiring a flooring expert for a smoother and more secure flooring surface after the installation. If you are new to underfloor heating, here are some of the things you can expect:

Electric underfloor heating installation

Electric underfloor heating comes with an interconnected coil or electrical wires embedded into heating mats. You can install them pretty much anywhere as long as they are connected to a power source. Significantly thin and more accessible, electric underfloor heating is ideal when retrofitting existing rooms. The exact installation process depends on the recommendations of the manufacturer, but the service usually includes:

  • Disassembly or lifting of existing floors (if needed)
  • Cutting of mesh if they appear too loose for the existing subfloor
  • Rolling out of heating mats
  • Fixing them on the surface using double-sided tapes or glues (usually attached on your mesh)
  • Installing of temperature sensors and connecting them to a thermostat
  • Connecting your underfloor heating to the main electrical source

Wet underfloor heating installation

Wet heating systems feature a series of pipes that are commonly connected to a central boiler, although some models can work with solar panels or heat pumps. Once you've set the temperature on your thermostat, the boiler will start heating a certain amount of water and pump them throughout the pipes. The heat energy from the pipeworks will emanate across the room, from the underfloor up to the ceiling. Installing your wet underfloor heating might take longer than electric underfloor heating since it requires a bit of plumbing work. While Taskers are more familiar with fitting them for new commercial or residential builds, there are also plenty of plumbers who can install them in existing rooms. The installation process involves:

  • Layout designing (if needed)
  • Securing the manifold in place
  • Fixing pipeworks in place
  • Connecting your heating pipes to the manifold
  • Screeding over the new underfloor heating systems
  • Checking of flow rates

After the installation, it can be quite frustrating to deal with all the residual dirt and dust floating around the house. If you don't have the time to fix up, why not book a Tasker for a quick after builders cleaning service? With the right skills and set of cleaning equipment, you won't have to worry at all about the mess!

Recent Underfloor Heating Installation tasks in Central London

Help me to set the Honeywell home thermostat/ heating system

£20

Tulse Hill, Greater London

21st Oct 2026

Could you help me to set/regulate the Honeywell home thermostat in my flat for the heating system to come on and off at specific times of the day to help keep my house warm enough for my newborn please.

Repair Uponor Underfloor Heating Controller

£150

Clapham, Greater London, SW4

21st Oct 2026

Looking for an experienced underfloor heating specialist, ideally someone who has worked with older Uponor C-56 wireless control systems. The controller serves three wireless room thermostats, none of which are communicating with it. Engineers have already attempted a reset, tested a replacement antenna and tried pairing a new thermostat, all unsuccessfully. The controller still activates individual heating zones during its normal 10-minute manual test cycle. Specifically looking for someone to diagnose the fault and repair the existing controller if possible, or recommend and install a compatible replacement control system while retaining the existing manifold and pipework. Please only respond if you have experience with Uponor or similar wireless underfloor heating systems. Located in Clapham SW4. Initial budget is for diagnosis and possible minor repair; replacement parts and installation to be quoted separately.

I need someone to have a look at my heating/radiators

£80

Shoreditch, Greater London, EC2A

20th Oct 2026

I have a very old heating system but it still works and for now I want someone to check my two radiators, one of which comes on but never more than warm, the other not at all. I'm in EC2A (opposite Maldron hotel). 3rd floor, no lift. Close to congestion charge zone but not in it.

HIU Heating Unit Repair - Loss of Pressure

£100

Greater London, England, United Kingdom

20th Oct 2026

We are experiencing loss of heating in our flat. Our heating is supplied by a communal boiler that supplies hot water and heating. The hot water is working (and other residents have access to heating) so the loss of heating seems to be related to our HIU unit in our flat and what seems to be loss of pressure. We need someone to inspect and repair.

Commercial Heating Engineer Required – Flamco Pressurisation Unit

£150

Marylebone, Greater London

19th Oct 2026

We are looking for an experienced and qualified commercial heating engineer to attend a commercial property in Harley Street, London. We have a Flamco pressurisation unit which appears to be displaying a fault and may require resetting or repairing. We currently have no hot water or heating. We require someone to investigate the issue, identify the cause and advise on any necessary repairs. Please only respond if you have experience with commercial heating systems and pressurisation units and can provide evidence of appropriate insurance and qualifications. Please confirm your availability and estimated call-out / diagnostic fee.

Plumber to check shower not heating properly.

£60

Norbury, Greater London

19th Oct 2026

The shower is not heating properly as it used to be. Apparently it has to do with descaling and checking the filter.

Underfloor heating thermostat wiring/electrical problem

£100

Poynders Parade, Greater London

18th Oct 2026

One of our thermostats for the underfloor heating broke, I tried to change it but now all the thermostats have no problem. No fuse switched off

Fan for heating and AC is not working, and screenwash not spraying.

£10

Peckham, Greater London, SE15

15th Oct 2026

I don't know why this app asking me to suggest a price for the job. It is for you to tell me the price. I am going to put the minimum of £10 but I surely don't expect to pay that high. The fan that is used for the demister, heating and AC is not working and the screenwash isn't spraying on the windscreen. They stopped working when the van came back from a major mechanical work but the garage said they never touched that part of the van. It's a Citroën Despatch year 2020.

Oven heating element repair

£100

Streatham, Greater London, SW16

14th Oct 2026

I need the heating element on my electric Hisense oven replacing.

Electric oven grill not working or not heating up.

£10

North End, Greater London

8th Oct 2026

Philip Whirpool Electric Oven and Grill, only the Grill is not heating up.

Floor heating

£100

Bermondsey, Greater London, SE1

8th Oct 2026

fix my floor heating, it’s making some wired noise, the pressure is fine

I’d like to book an annual boiler/heating service.

£200

Newington, Greater London

29th Sep 2026

I’d like to book an annual boiler/heating service, and at the same time, get a quote to split my central heating into two independent zones. Currently, the Worcester boiler heats one flat. I would like: Zone 1 (First Floor): Underfloor heating controlled independently by its own thermostat/manifold. Zone 2 (Second Floor): Radiators controlled independently by a separate thermostat.

Very knowledgeable and seems very experienced

Change thermostats Polypipe underfloor heating

£60

Tavern Quay, Greater London

28th Sep 2026

The entire flat is using the under floor wet heating. The old thermostat is broken. Model number: UFHDIALB I ordered the same replacement. Need to replace it and seal with silicone to make it looks nice. I am available from 7pm on Wednesday. Please let me know your availability. And or if you need more information. Thx

Great job! Thank you so much!

Replacing heating element in Bosch oven

£80

Clapton Park, Greater London, E5

26th Sep 2026

Element needs replacing in Bosch fan oven. It have the part just needs putting in.

Quick and efficient thank you

Need to to replace water immersion heating element first

£250

Marylebone, Greater London

20th Sep 2026

We have a water heater Ariston that needs to be replaced as it’s not working in our restaurant . The water heater is working intermittently after resetting it which indicates it could be the heating element only

Heating pipe cover

£80

Muswell Hill, Greater London, N10

9th Sep 2026

Need to cover and protect the double heat pipes for around 5-6 meters

Switch from smart heating to regular

£70

Clapham, Greater London, SW4

4th Sep 2026

Currently have a Tado smart heating system with wireless thermostat and smart radiator valves. I want to switch back to conventional heating setup and would also need replacement parts supplied and installed.

Heating fix

£40

West Norwood, Greater London, SE27

22nd Aug 2026

My logic boiler showing L2 no heating is happening please need a heating or boiler specialist

I want to fix the valve of my heating system managed by Evinox

£50

Westminster, Greater London, SW1A

8th Jul 2026

The valves are quite worn out. Can you please help me clean it and tighten it up? Please feel free to text me with other optional solutions for it. It should have been leaking a bit and looks quite rusting now. Thanks