Find professional thermostat installation in Central London

Install a smart thermostat that will allow me to control the heating from my phone. I have purchased the thermostat already. I have a gas combi boiler (Ideal Atlantic).

Could you help me to set/regulate the Honeywell home thermostat in my flat for the heating system to come on and off at specific times of the day to help keep my house warm enough for my newborn please.

I need a professional to install a new thermometat for Worcestershire Bosch boiler

Hiya we have a Worcester Bosch Greenstar 30si combi boiler in our fairly small ground floor flat (converted mid-terraced house), which is currently controlled by a Google Nest Thermostat. We're looking to replace it with a zonal system and have our eye on the Drayton Wiser.

One of our thermostats for the underfloor heating broke, I tried to change it but now all the thermostats have no problem. No fuse switched off

Task: Diagnose and Replace Wireless Thermostat – Glow-worm Boiler I have a Glow-worm Ultimate 30c combi boiler with a wireless thermostat that has stopped working reliably. The thermostat screen is intermittently blank, and the heating won’t come on when the display isn’t working. I’ve replaced the batteries and completed basic troubleshooting, but the issue persists. I suspect the thermostat needs replacing, potentially along with the receiver. I’m looking for a qualified heating engineer who can: * Advise on which replacement thermostat and receiver to purchase, ensuring compatibility with my boiler. * Check whether both components need replacing. * Install and pair the new equipment, and test the heating. I can purchase the recommended equipment in advance once compatibility is confirmed.

We have an old digital thermostat we’d like switched to a Nest thermostat - photo of current one to be removed

Wire a thermostat receiver

Ii need a thermostat receiver wired

As above - nest thermostat connected to combi boiler. I have the thermostat

I need someone to install a Drayton Wiser Thermostat Kit 3 (2nd generation) to our heating system to replace 2 separate Honeywell thermostats (see attached). https://www.toolstation.com/wiser-2nd-generation-thermostat-system-boilers/pAM307?store=JQ The thermostat will manage 2 seperate heating zones plus hot water cylinder and the job is in Battersea SW11.

I’m looking for a quote for installing a Nest Learning thermostat, 3rd Gen. I have a Worcester Bosch Greenstar 28CDi Compact ErP currently using a Comfort II RF. I want the Comfort II RF removed and a 3rd-generation Nest Learning Thermostat Heat Link installed using the boiler’s 230 V switched-live room thermostat connection. The Heat Link can be mounted beside the boiler.

The entire flat is using the under floor wet heating. The old thermostat is broken. Model number: UFHDIALB I ordered the same replacement. Need to replace it and seal with silicone to make it looks nice. I am available from 7pm on Wednesday. Please let me know your availability. And or if you need more information. Thx

The entire flat is using the under floor wet heating. The old thermostat is broken. Model number: UFHDIALB There are only 2 wires behind it. (Please check the photo) I want to change to the new thermostat which can be controlled by WI-FI. I currently have 2 types of the thermostat. One is UFHSMARTRFW. Another one is UFHSMARTW. Which one can be used? Hub model: UFHWIFIHUBW I am available from 7pm during weekdays and weekends is free. Please let me know your availability. And or if you need more information. Thx

I’m looking for an experienced heating/HIU engineer to diagnose an issue with the heating controls in my flat. I have an HIU (Heat Interface Unit) and a wall-mounted heating controller/thermostat. The wall controller does not appear to be communicating with the HIU correctly — changing the heating settings/turning the heating on does not seem to trigger the HIU or radiators. The HIU has previously had a faulty actuator valve head replaced. The previous engineer replaced the actuator and got the heating working, but I don't think the wall controller/controls were properly investigated. I therefore need someone who understands BOTH: HIUs / Heat Interface Units Heating thermostats, programmers and control systems The communication/connection between the wall controller, receiver/relay and HIU Electrical/wiring diagnosis where appropriate I’m looking for someone to diagnose the actual fault rather than simply replace the actuator again. Please only apply if you have experience with HIUs AND heating controls/thermostats. I can provide photos of the HIU and wall controller, as well as the previous engineer's report.

Looking for an experienced heating engineer to install a Bosch EasyControl CT200 smart thermostat. Boiler is a Worcester Bosch Greenstar 34 CDi Classic ErP and the Bosch EasyControl CT200 has already been purchased. There is currently no room thermostat installed, so this is a new installation rather than a replacement. Job to include connecting the EasyControl to the boiler, running any required 2-core thermostat cable, mounting the thermostat in a suitable location, and commissioning/testing the system. Please confirm experience installing Worcester Bosch/Bosch EasyControl systems and whether your offer includes any required cable/materials

https://www.bidet-shower.co.uk/warm-water-kits/kit4800-pre-set-thermostatic-bidet-shower-kit-with-auto-prompt-water-shut-off-valve/ Product page says the Bidet Sprayer must be installed in compliance with the Water Regulations Advisory Service (WRAS) guidelines. Looking for an experienced, appropriately qualified plumber to install this thermostatic douche/bidet spray in new build apartment. Work required: • Assess existing hot/cold supplies and pressure • Install suitable feeds and isolation valves • Fit and connect the thermostatic valve, hose and spray holder • Fully test for leaks and correct operation • Access and neatly reinstate/regrout the existing tiled service hatch afterwards Must be experienced with domestic plumbing and tiled bathroom finishes. Please state any relevant plumbing qualifications or experience and any pics of similar work. Price should include labour, materials. Thanks.

Need to replace shower thermostat which is broken and now only works on very hot setting - replace part with correct specifications already bought

My bath/shower’s hot water has become unreliable, although the hot water supply itself is working well. I think the problem may be limescale affecting the thermostatic mixer cartridge, so I would like it to be removed, inspected and cleaned. I started trying to do this myself but realised I don’t have the experience or tools for the job, so I’m looking for someone to help. The mixer is an Ideal Standard A4054AA Active bath shower mixer, and the thermostatic cartridge is S960134NU, in case that’s helpful. This is a slightly fiddly job that will require experience with thermostatic mixers and a toolkit. I particularly struggled to remove the plastic pin holding the cartridge/unit together, so I’d like someone who is comfortable dismantling and reassembling this type of mixer.

Hi! I need an experienced plumber or handyman to replace the concealed thermostatic valve element in my shower (Scudo brand). Part: The replacement thermostatic element is already purchased and on-site. Access: The existing shower system is a concealed valve setup. Photos: Provided Requirements: - Please bring your own tools and white silicone sealant will be required. - You must have experience working with concealed thermostatic shower valves. - Please ensure the water is turned off safely, the element is swapped cleanly, and the seal is tested for leaks and temperature control before finishing. Thank you.