Find an experienced fireplace installation professional in South London

I’m looking for an experienced carpenter/joiner or media wall specialist to build a high-quality, modern media wall in my living room. Location: Beckenham, Kent Scope of work * Build a bespoke chimney breast/media wall against an existing load-bearing wall. * Overall wall width: 2,740 mm (with a chimney breast to be installed at either 1,8m or 2,3m). * Install my supplied electric fireplace. * Prepare for TV installation. * Conceal all cables, including power and TV connections. * Install IKEA LED strip lighting * Plaster and prepare the media wall ready for painting. Design I’m aiming for a clean, contemporary, premium look with: * A slim chimney breast. * No shelves or cupboards. * Minimalist design with crisp edges. * Hidden cable management. * A high-end finish suitable for a modern home. The bottom of the fireplace needs to be installed approximately 500 mm above the finished floor. What I’m looking for Please only apply if you have experience building bespoke media walls. When responding, please include: * Photos of similar work you have completed. * Whether you recommend timber or metal stud construction. * An estimated timescale. * A fixed price or an estimated cost, including what is and isn’t included. I already own the fireplace and TV, so I’m looking for a quote for the construction and installation only. Thank you, and I look forward to hearing from you.

Tried and failed attempt at mounting tv above fire place as my drill isn’t powerful enough. Need a very light 40 inch tv mounted above fire place. I have the tv bracket just need to provide your own drill to drill holes and mount please

See images. Before and after. Build a frame around the fireplace approximately one tile deep and then tile the box and inside the fireplace. Tradesperson to supply all tools and materials, excluding tiles which will be supplied.

Have removed most layers of the paint on this cast iron fireplace. Need the last layer removed.

Hi, I am looking to remove the white filler by the fire place and have new tiles instead. I have bought these tiles in 2 colours, and looking to have a chequered pattern. The tiles should arrive next week so looking for availability for week of 20th. https://www.milagros.co.uk/collections/inset-tiles/products/special-green-inset-hand-made-tile what is the time required and overall price? Thank you

1. To hang 3 mirrors on the wall (2 are quite heavy so I am not sure what fixings etc would be needed). The arch mirror below is to go above the fireplace 2.Secure a fireplace surround to the wall(picture below) 3. Hang 2 ceiling lights (both the same in separate rooms)

I need 3 things, which can be done in probably half a day 1. Connect the extractor fan to the vent 2. Plasterboard underneath the boiler to finish off the plaster boarding in that area, probably half a meter-a meter wide 3. Shorten our wooden fireplace, screw it together and secure to the wall

We’re renovating a bedroom. The bedroom has a fireplace in it. We want to take the fireplace hearth surround etc out and board up to use the wall as usable space. We also want to get a dado rail and panelling up.

My fireplace floor needs cementing/levelling/plywood to level out, find a solution for covering broken brick, and tiled

Tv unit with fire place to be installed

Tile a small area of my fireplace including cutting some tiles to size, applying adhesive and grout. I have pre-purchased tiles, adhesive, grout and tile spacers, I do not have a tile cutter though. Pictures attached.

MDF wood to be put inside the hole, cut out the middle to be able to allow new Electic heater to fit and look flush ( I hope that makes sense)

Build a brick hearth coming out of the fireplace. Add a brick or tile hearth inside fireplace Tidy up the rear and sides of fireplace Fix plaster around fireplace

We have two fireplaces that we'd like to add tiles to and create some kind of nice edge. One would need to be edged around a hearth, and one would need to finish where the jagged carpet can be seen in the pictures. They would be arranged in a staggered pattern as seen in the last picture. We can order the tiles and any materials but needing some consultation as to what to get, and how many tiles to get as well. May be helpful to arrange a visit to measure etc.

Need somone to fit tile board and then tiles inside and around fireplace.

Two side tables need priming, sanding and painting (one has already had two coats of primer applied) and a wooden fireplace surround needs sanding, priming and painting; it has already had one coat of primer). I have the paint for these jobs.

Putting up 2 floating shelves each side of the fire place

Fitting a wall mount and 50 inch tv to the wall above fireplace

We have 4 chimney breasts, 2 with open fires, that all have old gas fireplace restrictor elbows (think that’s what they’re called?) that are sticking out of the floor next to them. Photos of all 4 included. We need someone to remove them and cap off the pipe under the floorboards. NOTE: - Corgi gas safe registered engineers only please. - We have original floorboards and would like someone who will be sensitive to this and not gouge them with screwdrivers and cause damage (you would be surprised how often people do this). Thanks

Mount an electeic fireplace to the wall.