Find a trusted local electrician in Hertfordshire

To hang a plug onto the wall, creating a s cond plug for the dishwasher.

Un install cooker and washing machine and possibly transport to new home

Hang chandeliers, mirror, frame, move sockets

I would like 6 garden lights installed

Electrician to come and tidy and make safe some cables from an aircon and old security system (already removed) as well as connect some porch lights

Fit 1 chandelier and 1 ceiling light & change wall mounted light switch (currently switch both living room lights simultaneously and we need it to be one by one).

Old big air con units need removing. Not connected or working in any way

The floor has already been primed, and tile backer boards have been fitted. I need someone to install 18m² of electric heating mats and levelling compound over the wires. Wiring and connection to a new fused spur, install and wire a thermostat, test the system (insulation resistance, continuity). Provide a Minor Electrical Installation Works Certificate. All required materials are on-site, including the heating mats, thermostat, RCD fused spur and self levelling compound.

Couldn’t make the title long enough so please see a breakdown of what I need doing: (Old Victorian Terraced House) 4x Existing Ceiling Lights replaced with new ceiling lights from dunelm (see pictures) - They are all the old style electrics and the new fittings seem to be the new style - Would also like Dimmer Switches Installed vs the regular switch. - Dimmer Switches will be provided - Need an additional Plug socket put into the kitchen (neatly) ideally to run under the counter (See Image) - Need an outdoor front door light fitting and routed to power. FYI there is a plug socket the other side of the wall (see pics) - Also replace one of the ceiling roses with a spotlight

I have all the materials and just need these replaced with current ones 10 x sockets, 7 switches, 3 flush ceiling lights

We are in the process of replacing the plasterboard in one floor in our house and would like some light switches and plugs to be moved to fit the new room layout. During demolition we also discovered lots of wires in the walls going up to boarded up switches which we would like readjusted. List of tasks: 1. Move position of 2 light switches 2. Get rid of 1 light switch 3. Get rid of 1 plug where non-structural partition wall was removed 4. Install 2 new double plug sockets (bedside) 5. Add 2 wall lights on either side of bed and repair 2 old boarded up bedside table light switches to control wall + ceiling lights 6. In the corridor we had a fused ceiling lamp which was always on with a night light with fuse visible on wall. We would like the fuse hidden and replaced with a normal light fixture 7. Hide a dangling electric wire and get rid of old stray wires which are no longer needed

We need to get a quote to install a cooker hood extractor. There isn't one installed now, so would be good to know if this is possible and the options available.

We have solar panels on our tenanted property, 6 panels on one side of the roof, 3 on the other. We’re having a nightmare with the piegons, nesting underneath them, there are 2 nests under them that need removing. Plus the wire mesh installed around them to stop pigeons going underneath. Plus any other deterrent installed that can be advised to stop them sitting on the aerials. (We have tied silver balloons to them which have helped initially but they’re still nesting and making such a mess and noise in the garden

Hi, I have an outside external Ring security camera (comes with mount) that I am looking to have mounted to the exterior brick wall of my house either near or between the 1st and 2nd floor windows(4-6 metres height from the ground so you will need to provide a ladder). It’s got a wired 3 pin plug so open to suggestions and best practice on how to get this powered. Junction box (not provided) or drill hole from the house inside to outside to pass the cable through? Please provide your proposed solution in the response In Watford WD24

We’re looking for a certified F-Gas engineer to commission a new wall-mounted split air conditioning system in our home in Berkhamsted (HP4). My partner is an experienced ex-builder and will be taking care of the physical installation, including: • Mounting the indoor unit • Installing the outdoor condenser unit • Running pipework and trunking • Setting up the electrics (by a qualified electrician) What we need is a professional F-Gas certified engineer to: • Check the installation • Connect and test the refrigerant lines • Carry out vacuum pressure tests • Commission the system and ensure it’s fully operational and safe • Provide appropriate paperwork/certification for compliance ⸻ Requirements: • Must hold valid F-Gas certification • Experience commissioning domestic wall-mounted split AC systems • Own tools/equipment for vacuuming, pressure testing, and refrigerant handling ⸻ Notes: • The system is a 12,000 BTU wall-mounted split unit (LG / similar spec). • All preparation will be completed before your arrival — this is just for final connections, testing, and sign-off. • Flexible on dates, ideally within the next 2–3 weeks.

Hi, I require a certified electrician to fit 3 ceiling fans in 3 bedrooms. I live in the Pansanger area of Welwyn Garden City. I would like this work done ASAP. THANKS.

Small electric radiator removal from small bedroom requires electrician. Radiator measurements (50cm - 45cm)

- Install a new port socket for an X-ray machine - Install a hand dryer in a bathroom - Tidy up of wires Open to offers

Electrician to install outside socket with dedicated circuit and trip switch

Hi there! I’m looking for an experienced electrician to: Hang a ceiling light and replace a light switch.