Find local electric cooker installers & repairers in Hertfordshire

Cooker hood need replacement, you can source or let me know which model will work

I have a commercial unit and I need a sink moved and plumbed in. Frankly the existing plumbing thats there is a bit of a shambles but there are water lines and drainage already in place to connect to (may need a 90° ½" connector to connect flexi pipe), it would be a matter of cutting the existing waste pipe using a tee and a little pipe work (maybe a 135 bend to bring it up to level) then connect a trap to it. Also to cap of the end of the existing waste. The kicker is this is all 1.5 solvent waste. Also I need someone gas safe and competent to help me disconnect a cooker.

Lamona extractor hood needs repair and I’d repair is not possible might need advice on replacement for either parts of the whole system

Replace extractor hood for kitchen.

I need an electrician to do this: 40 amp fuse to replace 32 amp and possibly a 10 milimetre cable run from fuse board to cooker terminal

I need to replace this faulty cooker extractor hood with fan. The hood recirculates the air (not extract). I can purchase the fan, I just need someone to fit it.

Replaced fire damaged extractor fan hood, with a similar device that will be provided.

I want to install new kitchen cooker hood and extractor fan ASAP. This includes parts and labour

Replace cooker plug socket unit

Basic electric cooker install

Help connecting electric cooker and removing my old one

Need this installed on the wall

Moving property and will need it Plummed in in new property

Cooker vent has come away from wall but is still usable

Fix light fitting. Cooker trips the fuse box.

Remove current cooker hood, replace with new hood. No ducting needed its a recirculating model.

Need to install not ducted cooker hood. On the wall. However, there is ceramic shelf on top of hob right now, that needs proper cutting only for hood shape. The light bulb socket might also need to move to left.

I have a new freestanding cooker and the wire i need someone to wire it in

Combisteel Deep Extraction Hood 900mm Wide With Motor, Filters & LED Lights - 7227.0005 with external ducting

I need my cooker circuit extended from current outlet plate to a new position approx 4 m away following the wall. The new position will need 2 single gang sockets for the two new ovens, both of which are designed for standard sockets and come pre fitted with 13A plugs. Basically, I just don't want them both plugged into the ring main. There's not a lot of work. I'm happy to have isolator switch where it is. There's surface mounted trunking already in place along the run, I just need cables run from the outlet plate along the wall in the trunking on to two single gang sockets behind the new cabinet where the ovens will be. Happy to supply cable, sockets, back boxes etc if easier. You can see the tall cabinet in the photo. Once I have someone booked, I'll make sure everything's out the way, including cabinets for easy access. I had this job posted before but due to work, under estimated when I'd be ready so it expired. Ready to go now, so please get in touch if you're interested.