Find a local floorboard profesional near you

My floor boards are squeaky, I need them to be secured. My floor is carpeted so the carpet needs to be lifted and the floor boards need to be nailed down. There are two to three specific small areas that need to be done.

Images coming later today. 1 area is quite stained, but all needs a good sand and a nice stain.

Install MDF floorboards to existing original wooden floor

I have recently had engineered wood flooring fitted but there has been some gaps appear between some planks. I would like someone to see what can be done to fix the gaps. I have attached an example of the biggest gap

i need my floor boards to be installed into a bedroom

Decking boards and joists already pulled up, screws hammered down. Beging to cut boards down to into smaller sizable prices. Decking footprint 8m x 4m Type of gardening: Garden cleanup Size of garden: Under 50m² Has green waste bin: No

Replace if needed or fix floorboards in bedroom (currently very squeaky!) needed before carpet is fitted

We are having all of our existing carpet lifted next Monday 03rd August. After that, we request works to the flooring below to take out noticeable creaks and movement.

Need a joiner, broken floor board needs replacing and fitting. Also need repairs on a loft hatch door

I need all the floorboards lifting in 3 rooms on the ground floor including the nails from the joists. The floorboards aren't going back down so they don't have to be taken out gently and ok to damage. They can be moved to the back garden. Living room - 3.7 x 3.7 metres Hallway - 1.8 x 4.0 metres Kitchen - 6.3 x 4.2 metres (half of this room already done) Tasker will require to bring a multi tool for removing the boards on the edges of the hallway and living room front bay to prevent damage to the skirting boards. There are no carpets or floor covers - the floorboards are already exposed.

We have a 4 cm dip in our floorboards that needs fixing

There’s a crack in my floor board not sure how the damage was caused but it needs to be fixed. either via replacement or sealing that’s not too noticeable

Only 4 years old, boards started moving approx a year ago. Screws holding end boards too small & rusting. I need quotes to ascertain cost.

[REPOSTED TO INCLUDE PHOTOS FOR MORE ACCURATE QUOTES] We're looking for a handyman or carpenter to inspect and repair what we believe is a rotten floorboard beneath our washing machine in Brockley/Lewisham. During the spin cycle, the washing machine vibrates excessively. The vibration is strong enough that it causes the kitchen worktop, oven and surrounding units to shake. The oven rattles loudly, and even the removable parts of the hob (pan supports and burner caps) have to be taken off before every spin cycle to reduce the noise. We'd like the floor inspected, the damaged floorboard repaired if necessary, and the washing machine stabilised to significantly reduce the vibration. If further issues are found (e.g. damaged joists or evidence of a leak), please let us know before carrying out any additional work. If you also have experience with any of the following, we'd be happy to discuss them separately: - Shower riser rail & curtain rail installation. - Removal of an old corroded stopcock with wall repair. - Installation of a garden tap.

I need laminate flooring layed down in the front room and small hallway area and skirting boards fitted around that area.

Some of the parquet floorboards are scratched and others are burned with dark stains, so I imagine they will need to be replaced. I also need the small burn mark in the bathtub to be repaired.

The subframe will already be built and level, but I just need someone to cut and screw down the hardwood boards. I have all the materials, tools and mitre saw. I’m just short of time and need to get it done by Friday. Just looking for some with the skills and experience to do the job professionally.

The scratches on the floorboards need sanding and filling we have a kit

I need to do a temporary repair on 2 floorboards in my bathroom. I want to keep the original floorboards but they have a crack. The recommendation from the old owner - who is a builder but lives overseas, says to put a brace understand the floorboards to stablise them. He said should be relatively easy. To remove the 2 floorboards, temporarily move the toilet basin to access, brace then return The floorboards are attached with - Bullet Hole Screws The toilet has 2 screws toilet and would need to be moved, water stopped The job has to be Wednesday as I am travelling before and afterwards. I can be home all day, ideally done during the day in case we need wood from Leyland - they need to be open and they are across the road