50 Staining Experts Near You

Sanding, staining and varnishing area of 3 rooms (potentially some gap filling). 450 x 300 cm 315 x 154 cm 447 x 356 cm

So, there is a large black mark on the flooring and it now needs to be re-stained. One coat only. (Floor is wooden)

Spilt a large cup of coffee on a mottled cream colour carpet, need an experienced carpet cleaning service as the stain remains after using 1000+ stain remover. see photo

Hi, we need to oil a wooden decking (~40 sqm). Equipment required: anything you need to complete the job. we have no tools and no oil/paint

Stain made with purple shampoo (so is a dye) Someone with experience doing this type of work only please. Free parking

I have a 30 x 35 cm stain on floor carpeting, which I would like cut out and replaced (I already have the replacement carpeting to use). Once the job is complete, it must blend in seamlessly with the rest of the carpeting. Job is in Clerkenwell.

I have a small (50cm x 20cm) coffee stain on the standard wool carpet in my bedroom. I managed to get most of it out using vanish carpet spray, but the patch is still a light-brown colour compared to the lighter tan coloured carpet. It needs professional cleaning to fully get the stain out.

Make good and repaint part of ceiling following a water leak. Size of stain is approximately 170cm x 120cm at the widest points. Free parking right in front if needed. *reposting job as tenant started self-isolating, but has now left the property, so all ok to proceed.

Looking for someone to stain our wardrobe doors a walnut colour to match other furniture. second photo is the wardrobe doors, first is the walnut wardrobe we want to match the colour of.

It’d be the case of removing the staining from the wood board surrounding the bathroom sink. We are unsure of the cause/liquid that stained the surface.

We are looking to stain our wooden table - inexpensive table but just an ugly brown colour. We’d like a dark brown/black. Happy to buy the materials but will need to be guided!

The shower pressure is low and just needs a simple adjustment. There’s a chair in the living room that needs a little tightening. All in all it won’t take more than 10 minutes. The price is fixed and non negotiable. If your serious please message.

Some bleach has been dropped on small area of engineered wooden floor. Wiped and washed it with water right away but has been left discoloured a bit. Need a quick fix.

I have roughly 37m squared of Iroko fencing and pergola that needs staining with the following: 1 coat of Sikkens Cetol HLS plus (18 - 24 hours drying time) 2 coats of Sikkens Cetol Filter 7 plus (16 hours drying time) This should be done with a brush. I already have the stains. Lots of the fencing is very high up and difficult to access as it's underneath flower beds.

We spilled oil on our wood. We need a clean to remove the oil from the wood. Please let us know what the best way for this is

I’m wanting to complete getting my floor boards sanded filled (where there are gaps) stained and varnished. I’m wanting my floor to match the stairwell. I recently purchased so I don’t have too much furniture but there will be some to work around. Floor plan gives an idea to scope of work. All rooms excluding kitchen and cupboards need sanding. The flooring is uneven in areas and an Airtasker released the task as he wasn’t confident to complete the task as he wasn’t experienced with uneven floor boards. Just from using the measure app on my iPhone it looks like some boards are 5degrees maligned. See photos.

I have a commercial stainless steel freezer which is decommissioned and no longer working so it is now being turned into a meat dryer. I need to cut four 8"x4" square holes in the walls and door to create vents. The work will need to be completed in my garage workshop in North West London. Please bring your own tools, this job will require an angle grinder or power saw and the appropriate blades for cutting through stainless steel and all the insulation and wiring within the walls.

I need someone to put a 3600mm handrail on the wall leading up the stairs. The handrail is made of stainless steel and is in 3 parts. Please see attached photo of the product from B&Q. Please have your own tools. I will supply the handrail and fixings. Reference: https://www.diy.com/departments/stainless-steel-handrail-kit-l-3600/958372_BQ.prd

My boyfriend split vanish on our wooden table (unvarnished or very thin varnish). Need it sanded down I imagine. Just want that stains gone! Thanks

Need a shed taking apart in Staines and then delivered to London N22 and then put back together. A base will need to be made so it is of the ground. We have a fair amount of pallets and wood. However you will need you own screws. Once the shed is up we have laminate flooring to put down, all ready to go it will just need to be cut down to size and slotted in. 24 by 10 feet. Is the size of the shed. Own tools required.