Book a reliable freezer installation and repair service in London

Plinth Currently, the doors of the fridge freezer doors do not line up with the doors of the cupboard. We need a plinth to be made to raise the level of the frige freezer so fridge freezer doors are level with the cup doors The fridge freezer doors can then be attached to the cupboard doors. Hinges for the cupboard We need to replace the hinges for the cupboard doors (that will be attached to the fridge freezer doors). The screws for the hinges need to be reinforced so they don’t come loose with repeated opening and closing of the fridge freezer doors. The fridge door contains heavy objects (like large bottles of milk) and that puts pressure on the hinges and screws which causes them to come loose over time so they need to be reinforced to prevent that from occuring. Also, we need 10cm cut off a door

Freezer door alignment is off so the door won’t close fully

We have a brand new Adexa freezer (commercial) that heats up instead of cooling down. We need an engineer to write a diagnostic report.

I have removed an old freezer, but it now needs to be disposed of from the property. Also, the new freezer that I’ve installed is difficult to position so that it connects to the integrated door and shuts fully. This could be solved by temporarily taking the fridge and shelf out above it to get the freezer properly aligned or possibly adding to battens inside the cabinet door so that the freezer can shut fully when attached to the door.

I have purchased a replacement integrated fridge/freezer (Ikea Isande) but I need help with reversing the hinges so it's left side opening instead of right. Once this is done, I'd like support with fitting it back into the integrated unit.

We have a new American style Fridge freezer and we need the ice and water maker plumed into the mains water

Samsung Fridge-Freezer – Fridge Not Cooling (Freezer Working Fine) Description: My Samsung fridge-freezer powers on and the freezer is working perfectly (–19°C), but the fridge compartment isn’t cooling properly. The display and compressor work, and I can hear the fan running, so the issue is likely with the air damper or temperature sensor (thermistor) that controls airflow from the freezer to the fridge. I need an experienced fridge/appliance repair technician (not an electrician) to diagnose and repair the problem. Model type: Samsung No Frost fridge-freezer (Smart Eco System, digital display on the front).

Looking to fix a Zanussi fridge/freezer which is leaking a bit of water from time to time. Likely that freezer drain needs to be released.

Kenword fridge freezer without defrost. The bottom of the freezer is covered in ice, and two or more times in 24 hours the ice starts to melt and flow. I clean the ice and after a while it reappears.

Integrated fridge freezer (Howdens) - freezer has frosted up . I think it is the seal or the door placement. Fridge seems ok.

In our washing machine, the drying function does not work anymore. In our fridge freezer, the ice cube maker has ceased to function. Please fix both?

Freezer seal stopped working so door won’t close. Have tried hairdryer trick which has worked in the past but no luck.

My Haier fridge freezer is creating excessive ice and the compressor is making a lot of noise.

Stopped working due to ice buildup switched off for 4 days till ice completely melts away, found bottom container box in freezer completely full of frozen water but no leakage to exterior, now when plug in, it starts to work, lights come on inside and on outer display module also motors start to work but then switches off without a sound 1 minute later, and would have to unplug then plug in for it to re-start for it to switch off again after 1 minute

Fix freezer door with hinges

I need my freezer fully defrosted so I can sell it/ replace it with the new one. I have tried to do this myself but have failed. I have attached photos below.

New fridge freezer is about 1 meter from water supply on the other side of the wall.

Our freezer is part of the fitted kitchen; its door is attached to the door of the fitted cabinet. When we tried to open it this morning the it could only be partly opened. I didn’t try to apply any pressure and force it open; it closes OK.

Install of a new fridge freezer (integrated) to be done. Old one will be removed, new one delivered. Just install of it.

Install upright integrated fridge and freezer into pre-existing fitted kitchen, replacing same sized units (which will be gone). Electric supply in place, the main job will be mounting sliding hinge doors, and adjusting height etc. Replacement units are standard size and will fit into existing carcasses.