Find a professional built-in wardrobe contractor near you

LOOKING FOR QUOTE – CUSTOM BUILT-IN WARDROBE I'm looking for a handyman, cabinet maker, or wardrobe installer to build a custom wardrobe in a small room. Room dimensions: • Width: 215cm • Height: 227cm • Depth: 140cm Please see current photo of space, and my idea

Built in robe in upstairs bedroom. two doors open up into unfinished wall cavity, with roofing insulation immediately above it. Middle section of drawers protrudes into the cavity. Carpet has just been installed, so must be covered to ensure no paint on it. Need to seal along entire length of plasterboard, seal up all holes - 30x50cm panel into roof space, approx. 6x 8x15cm small holes into roof cavity. putty or equivalent over sealed sections, to ensure clean finish. paint inside of this space , including the drawers section. Natural white. I have a litre of so, but will need more. Approx dimensions: 120 high (sloping back to 80ish) 90 deep 300 wide Also remove adhesive residue from the two small windows pictured, if possible. Thanks

Looking for built in wardrobe; size is approx W 347cm and H 200 to 288cm (if reaching ceiling). Does not include materials Standard with 2 sets of drawers please Located in Strathfield

I need 3 shelves installed in a space inside a built-in wardrobe in the bedroom. If you have experience with custom shelving and can handle the prep and install, put in a quote. We can discuss details and timing as to what suits both of us.

We have 2 built in robes (one in each bedroom) and are looking to have the interior fitted out with more functional storage (hanging rails/shelves etc). Looking for quotes to remove the current shelving and replace with a new fit out that we can discuss.

I would like to build wardrobe in Garage H.2.6M W:2.8M

I need a quote to replace only the broken glass mirror in the built in wardrobe. Measurements of glass are approx. 200mm/850mm

Demolish and Remove Wardrobe (built on against VJ wall in Queenslander home. There is no asbestos). Measurements are 500 depth x 1560 width x 3010 height which is floors to ceiling. Must be done by 24 June because we are getting new floors on this room. No need to patch and paint- we can do that. Please see my other task if you are interested in building new wardrobe using ikea PaX kit (supplied).

Standard 2 door built in wardrobe need to put back uo in new house. A Male here to help. Only need one person

Looking to have wardrobes built in on either side of a fireplace (see photo). Would like them to be floor to ceiling and finished with the cornices (am happy to source these)

standard 2 sliding door wardrobe. Moved house. Got it all taken down and now need someone to put it up at new house. Glebe location. Asap $100. Each Have 3 to be done. Everything is ready to go just need someone to put it back up

I need a new wardrobe, hopefully with hinged doors. 2 doors.(120 cm) total width. And cupboards up the top over the door.

Repair cornice ready to install built in wardrobe.

- Remove & take away small built in wardrobe on one side of walk-in - Plaster & repair any holes/scratches left behind - 2-3 costs of paint over entire walk-in space, can be done following day if necessary (I will provide paint) - Wardrobe Dimensions: 72d x 170 L x 218h 39d x 170 L x 218h (shoe shelf will be gone) - Must be qualified plasterer/painter/handyman

Hello airtaskers! I have two built in wardrobes that I’m getting re-done. The wardrobes have been removed but the timber frames remain. I need them removed, trying to not damage the plasterboard too much. There are nails in the space and the floor, I need them removed. The spaces patched and painted and the floors sanded (I will stain and varnish). This is for two wardrobes. I will upload photos tonight.

Remove 2x built in robes - not built into an alcove, but fixed to floor and walls. Dispose of waste.

I need a 5m built in wardrobe done in the granny flat. Location is in Lugarno NSW

Knock out two built in wardrobes and build and fit two new custom ikea wardrobes we have brought. Repair walls and ceiling and touchup

👋 hello, I've recently accidentally damaged the mid shelf of my built in wardrobe, I hope the pictures helps, basically the screws are still in place within the built in frame, is maybe anyone here able to help replacing a same-size board? Measurements are 45x58x1.5cms I'm also open to suggestions for any solution that can ultimately make it easier or better, Thank you

Remove the damaged side panel off the built in wardrobe as it will be replaced with a new panel .