Find a professional tiler in Melbourne

50m2 of floor tiles 600x600 one room new

We are a tiling company experienced in wall and floor tiling. Please click on my profile and request a quote. We will get back to you. Please see photos of our work Servicing Melbourne and Victoria only

Looking to find someone to retile our kitchen floor! It’s only a small area - old floor tiles will be removed prior to you starting

Herringbone style tiling on kitchen floor 3 square meters total 1200 x 2000mm plus 800 x 700mm I will supply the tiles

Looking for an experienced tiler to install flooring in a commercial space at Prahran Market. • Area approx 5m x 7m (35m²) • Tiles will be supplied • Subfloor is asphalt ⸻ Scope of work: • Prep surface as required • Install tiles properly for a commercial kitchen setting • Cut edges and finish neatly • Ensure floor is level, durable and easy to clean ⸻ Requirements: • Proven tiling experience • Own tools • Must know how to work with non-standard subfloor (asphalt) • Clean, professional finish ⸻ Timing: ⚠️ URGENT – must be completed by Saturday Need someone who can commit and get it done on time ⸻ Location: Prahran Market, VIC ⸻ Notes: • Back-of-house kitchen (staff only) • Need something durable and suitable for regular cleaning ⸻ If you’re available, send through your experience and when you can start.

Need a quote to get the floor of this shower tiled, unsure why on earth it’s currently leftover Lino but need to get it properly tiled. The bottom of the shower is concrete and I think it’s uneven so will need to be raised up slightly and have the drain installed properly. The base area is 750 x 710

I need a tiler to complete a small bathroom wall and floor tiling job in front of the basin. Scope of work: • Tile approx. 1.5–1.6 m² floor area (two rectangular sections) • Tiles are supplied by me only • All other materials must be supplied by the tiler, including: • Tile adhesive • Grey or black epoxy grout • Spacers, trims, sealants, etc. • Prepare the surface as required • Install tiles neatly and level • Apply epoxy grout (grey or black) and clean on completion Important notes: • This is a small job, but quality and clean finish are important • Bathroom is accessible • Please bring all tools Location:Carlton

I need someone help with put the tile on the grey concrete. Please let me know how much is the quote and we can discuss further.

We have had some tiling completed and need about an inch taken off the bottom of 2 timber doors so that they can be re-hung. Not a huge job, but I don’t have the tools to do it.

Floor tiling required for new kitchen space. > I will purchase the tiles, either 600 × 600 or 300 × 600 >You will need to provide the waterproofing material, concrete sheeting, grout and any other material required All other material must be purchased by you. No demolition required. *** PLEASE READ MY PROFILE BEFORE ASKING QUESTIONS***

Tiling in front of small fireplace 140 x 40 cm Finished edging required as new carpet being installed Monday Tiles will be provided Must have solid experience .

We need someone to tile/vinyl or rubber the floor of our kitchen to comply with commercial requirements. This is for a small cafe. Please quote accordingly to include materials — the total area is approx 10.332 square metres. Thanks

Room approximately 2x3 needs vinyl tiles laid. Tiles ready. Glue needs to be supplied

Tile laundry floor area approximately 1300x 1300 over existing brick. We have left over tiles from bathroom 600x600x10 porcelain rectified. Will have washer & trough removed. Replacing with sink cabinet & front loader. Welcome advice if suitable to tile? Cement bed? Thank you!

Patch existing tiled floor where cabinetry used to be. - one area of 75cm x 55cm - one area of 55cm x 57cm With 60cm x 30cm ceramic tiles (supplied) Tiler to provide all other materials and equipment. Flexible with timing.

I WANT TO DO FLOOR TILING IN MY TWO BED ROOM UNIT INCLUDING KITHCEN AND BATHROOM

Hi, I am looking for cleaning tiles professionally with the correct tools as there are lot of scuff marks as well as grout and paint marks and need to be removed with machine. The tiling installation has just finished. It is for a showroom in Brunswick East

Need approximately 34m2 of tiling to office/ showroom in st georges rd northcote. Tiles 600 x 600 porcelain. Tiles and grout supplied just need lsbour and glue to concrete.

Small coolroom approx 2 square metres requires tiles or vinyl floor installation. Additional work potentially available for other areas.

Need my kitchen tiles removed & redone with new tiles approx 3m x 3m

We are needing to get 2 x porcelain whiteboards installed by EOD Friday the 13th Feb, between the hours of 9-5:30pm in Cremorne (right next to Richmond station). The whiteboards are 2400 x 1200mm and come with required mounting fixtures. These are to be mounted on standard office plaster walls, using the included landscape installation baton. Please reach out with any clarifying questions or further detail.

I need someone with experience drilling into porcelain tiles to drill holes and install 3 towel hooks and 1 toilet roll holder in my bathroom - happy to pay for the correct drill bits.

Top surface is approx 1.75 x 1.65m. Also 1 step in front requires tiling. There is also a small area just under the front door that requires a strip of vertical tiles. See pic of tiles and pattern i would like - decorative tile in middle, with dark tile border. Dark tiles on step. Tiles are 200x200x7 (rectified edge) porcelain. These are the tiles: https://www.scceramics.com/productdetail/Artisan/H05F1-071 https://www.scceramics.com/productdetail/Artisan/H05F6-071 2mm spacing between tiles I will supply tiles, grout and silicone and metal corner strip for edge of steps. I also have 3/4 bag of davco ultraflex tile adhesive and primer that you're welcome to use. I intended to do the job myself, but didn't realise they were porcelain tiles, so was having trouble cutting them, so figure I will leave it to the professionals! Top surface has had floor leveller applied so is nice and flat, ready for tiling. Job in Coburg VIC 3058

Just need to fix a broken porcelain basin and doesn’t want to replace it

The stone or porcelain needs to be cut to fit into the existing pantry structure to create a benchtop. Specs are included in the image/pdf

Porcelain tiles kitchen floor 4.2 x 2.7m Tile size 600 x 600. Wall to wall tiles. All cabinets will have been removed. Completely bare room. Old floor tiles (1970s laminex or vinyl) need to be removed. Gelato light matt tiles. Grout to be sealed. Second floor apartment. Asbestos report done. None shown. Royal Pde Parkville.

Cut and cut install porcelain tile

Disconnect and remove existing above bench porcelain basin. Install and silicone down new basin which is the same as the one being replaced. Install plug and washer to basin. Connect new basinto drainage and caulk. Remove all waste from site.

The inside of the sink has been stained by an unknown substance. The stain cannot be removed and must be restored to the original color by whatever means are possible. I have no clue what the best course of action would be.

Install shower curtain rod in porcelain tiles over bath

I need tiling done for a bedroom around 14sqm. I will provide the tiles 600 x 600 .

Needing someone to tile 20 mm porcelain tiles/ pavers for 36 m² and all glue and grout supplied going onto concrete and edging of to grates. Two driveways to be done MAPI product must have 12 to 15 mil Trowel and all own tools needed. Experience is a must. Please send pics of jobs done in messages. Sealer must be done in completion. It’s a clean slate to work with.

Required to drill a hole through porcelain tiles. 60mm or 75mm

I tile 47” 2 length wise cuts

I need a capable plumber to replace a porcelain toilet cistern. You'll need to buy a suitable replacement and install it. Test and confirm. I will pay for the cistern. Also check other aspects of the toilet for leaks to make sure the system is in good working order. - Due date: Needs to be done on Tuesday, 30 January 2024

Hi, I am installing a bidet attachment to my toilet and I am able to do it myself however I do need someone to drill a 20mm hole into the side of the toilet cistern only. This is so I can run the connecting part to the water in the toilet. I will not need anyone to install the bidet, just the hole as I don’t have an appropriate drill for this. Thanks - Due date: Flexible

I have a chip on the side of my porcelain toilet bowl and was wondering if anyone can fix this for me? We live in Australia 108 so pretty close to flinders - if anyone can do this, that would be amazing. - Due date: Flexible

Bath chipped and required resurfacing and sealing Porcelain sink requires repair/replacement - Due date: Flexible

I require seven cuts of outdoor porcelain tiles to fill in some gaps. Six are straight cuts and one has a corner that requires to be cut. Would estimate that it should take no more than an hour. - Due date: Before Friday, 3 February 2023

Hello! We need a qualified specialist to trim porcelain benchtop (just millimeters on the edges) so our gastop fits in and then connect that gastop correctly (so the regulator goes into the other cabinet) to the valve. - Due date: Needs to be done on Thursday, 5 January 2023

Looking for someone to tile our kitchen splash back tiles are 60x240

Hi- I need the kitchen and laundry splashback tiled- probably will be ready by next weekend

I have a kitchen tiled splashback that needs to be installed . We have renovated our house, and need to install the tiled kitchen splashback - however the home is a late 1800’s so some internal walls are not straight. I have been told the wall is out approx 20mm and 15mm in two different spots, so I require an experienced tiler who is capable of executing and performing a high-quality job. Additionally, I require the grouting to be done too All tiles are on-site already Please quote me an estimated price for the above mentioned work

Re grout bathroom shower walls, laundry, kitchen and powder room splash backs. And skirting tiles in laundry and powder. See photos. Approx 8m2. Good parking onsite.

Require a qualified installer to replace a splashback - glass / tiled. Will require a small amount of fixing the plaster ripped off. 250 cm long - 24cm wide Also looking at replacing the middle part of kitchen benchtop. Water damaged. So if both can be done that would be preferable. Please quote individually as two seperate jobs. Thanks

Need someone to tile a splashback around the kitchen stove, approx 3.3m2 altogether. The stove is located in a nook, so the area to be tiled is three walls around the stove. There is a canopy rangehood above the stove and one light switch in the area to be tiled. The tiles are porcelain, 61cm x 15cm. There is an additional task for the laundry floor where tiles were broken. This area is approx 60cm x 17cm.

Replace cracked mirrored splash back. The dimensions is 3.86m by 62 cm divided by 2 section

Remove old silicone and re-seal listed below ⤵️ :)) Sikaflex wet area - supplied Areas to be sealed - between splashback and bench top (total 3600mm) // silicone colour: grey // provided onsite - between tap and benchtop // silicone colour: clear // provided onsite - sink to benchtop // silicone colour: clear // provided onsite - cooktop to benchtop // silicone colour: clear // provided onsite I am out of town so I can’t do it myself - my subletter will meet you at property *photos aren’t the best, it’s what I had in my folder Thank you

Tiler to tile kitchen splashback. Need to remove existing plastic (I think it's plastic) kitchen splashback and replace with white subway tiles in an offset design. Small kitchen, floor plan attached for rough size.

kitchen splashback replace glass with tiles Wall 1: 149 x 63cm + side wall: 59 x 63cm Wall 2: 199 x 63cm

I would like to change my kitchen splashback in my apartment - would need the job done from start to finish - removal and then installation, grouting etc. Small apartment kitchen, so not much area to cover - less than 2sqm. I will supply the tiles These are the tiles I am thinking - or it will be something similar: https://www.perini.com.au/collection/cafe/t46153/?gad_source=1&gad_campaignid=17335802082&gbraid=0AAAAADhtpcHtrlPCTLarXUs_pJEGJYF0A&gclid=CjwKCAjw1tLOBhAMEiwAiPkRHvceUYN04WOUeTF9-je7LMq0RxGrxURmM84Plx5Y6TqPiKA5IV86OhoCDgoQAvD_BwE

I would like to tile over my glass splash back in my kitchen. I have the tiles and will have grout. Would like some advice on how to achieve a certain colour with the grout as its quite specfic.

We have a small splash back in our laundry that needs tiling. It is approx 110 (L) and 18cm (H). I have a small tiles or a large terrazzo tile that would need to be cut but no grout. Looking for someone who can tile and provide grout.

Tile bench top and splash back area of outdoor kitchenette with blue Kit Kat tiles supplied. Measurements are: Bench- 600 x 1150 Splash back area- 1000 high, 1150 wide, 550 deep. We will tile probably up to 860mm, maybe a little higher, to decide on the day. Front lip of bench top be tiled. Brass edging to be used, I can supply or tasker can if easier.

I would like the glass splashback around the window reveal and above one benchtop removed to assist with make good works around window frame. I plan to repaint the wall behind the splashback until I am able to do a full kitchen renovation. The splashback behind the cooktop wall will remain as is for now. Splashback to be removed size - 3240L x 680H x 320H (to window sill)

We’re installing a new kitchen and need to tile he backsplash. These are the tiles we are using: https://tiento.com.au/product/shibui-tofi/ Dimensions: 900 x 2700 (please refer to the drawings) Tiles will be purchased prior to - can you please quote including providing a grout (an off white/cream colour as per the photo) Please provide your best pricing.

Fill and blend small chips in the engineered stone splashback to restore a smooth finish.

Remove and install splashback (tiles supplied) existing wall must remain damage free to allow for the new tiles. Remove existing splashback. Replace with new tiles supplied. The power will be off to power points. You'll need to cut the tiles and supply grout. The size is 2.17 sqm (3.29 meters wide X 0.66 meters high) Grout and seal the new splashback

I need help installing splashback/tiles behind the water tap. Wash basin is 82cm long. We are installing a mirror cabinet above the sink and since it’s behind the sink, we are advised to install a bottom layer of splashback to prevent water leakage/damage. I do not need the entire wall tiled. Only 4 x 20.5cm tiles behind the water tap.

I’m looking for an experienced tiler to install wall tiles for my kitchen splash back. The tiles are 115mm x 115m, and the area that needs to be covered by tiles is about 2.5 square meters.

Looking to replace wall tiling in bathroom shower above bath just the black tiled section and install new shower head fitting Budget to be confirmed depending works needed - if you are able to assist would love to chat thanks

Job Summary – Bathroom Wall Tiling Supply of labour only to complete wall tiling to an incomplete bathroom shower/bath surround. Scope of Works: Prepare existing bare masonry/block wall surface ready for tiling Supply of all materials by client (tiles, adhesive, grout, and ancillaries) Install 100 x 100mm wall tiles to the exposed unfinished wall area, approximately 1.6m wide x 1.5m high (2.4m²) Ensure seamless pattern match and alignment with existing surrounding tiles already in place

Paint bathroom tiles on floor and walls - floor size is 1.5X3 m. Want sugar soap, sanding and primer as well as painted.

Hello: I recently had new floor tiles installed in a small bathroom. Around the shower floor drain the tiles had to be hand cut to fit the waste. The finish around the drain and along a few grout lines is a bit rough/uneven (see photos). The installer advised that this was unavoidable due to the cuts required around the drain. Before accepting that, I’m hoping to get a second opinion and see whether the finish can be improved — for example through tidying the grout lines, re-grouting, or another solution. Ideally I’d like someone with tiling experience who can: • Assess whether the finish can be improved • Tidy up the grout lines around the drain if possible • Suggest any practical improvements The bathroom is otherwise fully finished, so I’m hoping for a targeted cosmetic improvement rather than major re-tiling. Photos attached. Location: Port Melbourne

Hi, I’m looking for a tiler/waterproofer for 2 bathrooms (main + ensuite) in Clifton Hill, total 50m2 Scope: Waterproofing to floors and full-height walls (3m) in wet area.– compliant with AS3740 Tiling to floors and all walls Tiles: 600x300mm travertine (12mm thick) 1 shower niche per bathroom (fully waterproofed + tiled) Form falls to shower areas (no water pooling) Grouting + silicone to all junctions Shower floor waste is grate Bathroom size (each): Approx. 1.5m x 2.7m x 3m high Notes: Clean, even set-out required (no small cuts where possible) Must have experience with natural stone Please include waterproofing certificate Works to take place 2nd week of June

Help me fix bathroom tiles

Just re-grouting kitchen tiles on a splashback and bathroom tiles not a big area past easy job

Title: Replace 3 cracked bathroom tiles and 7 tiles where grout has cracked (wall + hob area). Description: Looking for an experienced tiler to replace approximately 10 bathroom tiles around a bathtub area. Scope of work: - Remove ~10 tiles (see photos) - Install replacement tiles (standard white tiles, have spares) - Re-grout and seal to match existing - Ensure waterproofing integrity is maintained - Clean finish, flush with surrounding tiles Details: - Location: Melbourne (postcode 3004) - Tiles are standard white ceramic wall tiles - Area includes wall above bath and hob/ledge - Some minor cracking around tap penetration and ledge - Flexible timing, but would prefer job done soon Materials: - I have tiles that can be used - Please bring your own tools and materials (adhesive, grout, sealant, etc.) Experience required: - Must have tiling experience - Prefer someone familiar with bathroom/wet area repairs Other notes: - Ticketed street parking available - Located in apartment one flight of stairs up. Please include: - Your quote - Availability - Photos of similar work (if available) Thanks!

Hi, I've a couple of loose tiles. I investigated and the cement underneath had broken/powdered into sand. The waterproofing seems fine. Task is to take up loose tiles, clean those tiles and re-lay the cement and re-grout tiles to the bathroom floor. EDIT - 25 March I'm going to see about getting replacement tiles. Updates to come.

One of the bathroom tiles is not properly fixed and moves when someone steps on it.

Tile resurfacing for bathroom, including shower. Plain white to help tiles look fresh.

Replace 3 small damaged tiles on a shower wall and grout to match existing. I have the tiles.

My tiles need to be re-grouted and the silicon replaced at the joints.

Tiling is needed for two cubicles and a vanity splashback. This job is for wall tiles only, floor is complete. Each cubicle has approximately 7mt of 600x300 wall tiles up to 1200 from the floor height. Tile trim to be installed at the top of the wall tiles along the entire wall. Cubicle size is 2.4x900. Vanity splashback is curved and has approximately 3mt of 150x50 tiles. All tiles on-site. We need this job done before 20/02/2026, if not sooner. I can meet on-site almost anytime.

Hi there, I am looking for someone to come and fix my bathroom tile. We have a spare tile.

One broken tile needs to be removed with another tile (which we have).

Need someone to: - Regrout tiles in the bathroom. Mostly area around the bathtub (photos 2 and 3). Possibly a few other locations in bathroom. - Reattach a few tiles that have become loose or are sticking out in the bathtub area.  - Fix/reattach lose/broken tiles (Photos 5, 7, 8) Thank you!

Just the preparation of tiles for their painting job (which I will do) Bathroom is approx 6sqm - tiles just on floor/shower/some on wall Task required from you: Tiles clean/tile sand/removal of exisiting silicone/primer suitable for tiles BYO all tools and primer/sand etc.

Tiles have been adhered directly to the floor with an adhesive that requires a grinder to remove. The room is 3500x 2000 and should take 4-5 hours or more.

We need to replace the old soap holder in the shower with a tile (20x10cm). I have already sourced the tile (second photo)). Will need the grout to be close to the existing grout. Apologies for anyone who provided a price for the last listing. It took me a while to source the correct tile.