Find a professional tiler in Fitzroy VIC

I have a kitchen splashback that I want re-tiled. I have the tiles - they're little green finger tiles, about 3 inch in length. You can just lay it over the top of the smooth glass that is currently on it. Probs would need tile cutter on some of them once the specifics of the project is determined. If you have a tile cutter great otherwise I can source one as part of the project. Splashback measurements: Approx 120cm x 70cm.

Screeding area of 1.6m x 2.8 m screed to level floor roughly 45mm deep.

Remove old grout from shower walls and regrout (1 shower), and remove old silicone in shower, replace with high quality mould-resistant silicone. Bring own tools and materials.

We have 2 clinic rooms, 3x3m roughly, need a quote for installing carpet tiles. We have the carpet tiles in stock, each tile roughly 50x50cm.

Rerouting small apartment bathroom in Fitzroy

Hi, I have a splash-back and a fireplace insert that I need tiling work done on. The splash-back area is approx. 262(w) x 60(h)cm (pics attached). I’d like the tiles laid in chequered formation and the left/right edges of the window sill to have a mitred edge. I have the tiles ready to go but will need everything else supplied. For the fireplace I’d like a dark green or black grout (or potentially no grout) to visually disappear amongst the green tiles. I’d also like a black steel edge trim around the inner opening. I also have all the tiles already (Moroccan), but will need everything else. I’m based in Fitzroy. Can you please let me know how much that will cost and your next availability? Ideally looking to start in the next week or so. Kind regards, Ben

A tiler required to tile a shower area of a bathroom. Tanked/ waterproof paint to be applied to already new installed and straighten AC sheeting on walls. The area is about 5.8m squared. Tiles are 100X100 terracotta as seem below. Floor will be framed and a shower base is onsite already. Tiles are already onsite. The images below show the shower space - PRIOR to the walls and floor being completed this week.

Looking for an experienced tiler to complete a bathroom shower that is already tiled and just needs finishing. Scope: - Grouting of wall and ceiling tiles - Sealing of tiles (tiles are porous) Details: - Small shower area (~3 walls, approx. 12 sqm total, full height incl. ceiling) - All tiles already installed - Small job – approx a few hours - Looking for a clean, professional finish Materials / Specs: - Grout: MAPEI Ultracolor Plus (light warm grey/greige) or equivalent - Sealer: Dry-Treat Stain-Proof or equivalent(before grout + after grout cures) - Silicone: Mapei Mapesil AC (neutral-cure) or equivalent at all corners, changes of plane, niche, and fittings (no grout in these areas) Notes: - Unevenness visible under lighting - not looking to redo tiles, just complete the job properly Please confirm: - Availability (ASAP preferred) - Experience with similar bathroom work - Please include all materials required (grout, sealer, etc.) Photos attached.

Bathroom and area outside needs retiling due to leak from toilet (which has since been fixed). Total area is ~ 5-6 square metres.

I’ve replaced a power socket on a tiled wall, but the new outlet body is slightly larger than the existing tile cut-out. I need a small, precise enlargement of the opening (approx. 1–3 mm) so the outlet fits properly without cracking the tile.

I need the tiles removed and disposed of, the area waterproofed and new tiles laid in my bathroom. 3.6m2 floor, 9m2 wall. Grout and tiles provided, all other materials to be provided by tasker. Certificate required at end of works.

Need to tile on top of existing floor. Tiles supplied and will be 600 x 600. 6 sqm

Quote to lay 4m2 of tiles in bathroom

Tiling on a kitchen bench base and depending on cost, re-grouting a shower

Kitchen floor tiled, 12sqm, tiles on site. Tiles here: https://victiles.com.au/products/prd-lgy45m-paradigm-light-grey-450x450mm-p3-matt

I have a big section of tiles that needs to be cut out and replaced with drywall. 4.2m x 5m

Tile half way up wall in 3 bathrooms and vanity area

Hello! Note: Total area is 10sqm of floor (including shower floor) plus approx 9.5 sqm shower walls. We have a small bathroom and toilet room we would like tiled, in a warehouse in Fitzroy. Area is level and will be professionally prepped with ac sheet (including floor), we just need someone to membrane and tile for us! Great access, ground floor, parking, we will supply tiles and grout. Tiles and grout provided. Thank you so much! Look forward to working with you. Please note, space is still being framed and sheeted, hence the messy photos - will be ready for waterproofing by this weekend.

Tile laundry floor area approximately 1300x 1300 over existing brick. We have left over tiles from bathroom 600x600x10 porcelain rectified. Will have washer & trough removed. Replacing with sink cabinet & front loader. Welcome advice if suitable to tile? Cement bed? Thank you!

Remove existing grouting in shaded area and then apply new grout to tiles in shaded area. Please give a brief summary of your experience doing similar jobs.