Find roof ventilation professionals near you

Need to install wind master for bathroom ventilation

I am looking to install ventilation fan for a double storey house with tiles roof in Colebee. Would you be able to provide a quote for supply and install. Preferably Bradford CSR

need to design and install roof ventilation fans around 12 to 15 numbers. need to discuss in person

Overview Supply of labour and materials to cut, install, and weatherproof three (3) roof penetrations on an existing flat metal warehouse roof. All penetrations must be sealed to prevent water ingress. Scope of Works 1. SolarKing Solar Roof Ventilation Fans (x2) Cut two (2) openings in the flat metal roof sheeting to suit SolarKing solar-powered roof fans Install flashing/base plate to each penetration in accordance with manufacturer specifications Seal all edges and fastener points with appropriate roof sealant Ensure watertight installation with no potential for ponding or water tracking 2. Roof Access Hatch (x1) Cut one (1) opening in the flat metal roof sheeting to suit a 600mm x 600mm roof access hatch Install hatch frame and upstand/kerb to the roof structure Flash and seal the hatch perimeter to ensure a watertight finish Confirm hatch opens, closes, and latches correctly after installation 3. General Weatherproofing All roof penetrations to be sealed using quality neutral-cure silicone or polyurethane sealant suitable for metal roofing Flashing to overlap roof sheeting in the direction of water flow All screw fixings to use neoprene-bonded washers Check and address any existing signs of water ingress or deterioration around the work area Materials Supplied by Client Item Qty SolarKing Solar Roof Fan 2 Roof Access Hatch (600mm x 600mm) 1 Materials Supplied by Contractor Flashing, sealant, fasteners, and any additional weatherproofing materials as required

Needing ventilation duct over garage as its hot and over the house roof as well - 2 over house 1 over garage - ( prefers wired or solar )

Need to install the roof ventilation on top of the single storey garage roof. The roof vent will be provided . Please let me know the rate and rough date and time

Replace roof ventilation

Current roof ventilation isn’t working , I bought one from Bunnings however need a handy man to replace the current broken one

Im looking for someone to.install electric or solar roof ventilation. Needing you to determine hiw many and where.

To install the Solar Roof Fan Our roof doesn’t have sarking, and there are no wooden boards under the tiles. If we install this solar roof venting, can it be securely fixed?

Hi, We need to remove the excess heat in our Warehouse (600 - 800 sqm high ceiling) so want to install Vents on roof as currently we have none. In normal days temperature inside is fine. Just to prepare ourself for summer as it does get hot inside if it's 30 + degrees outside. So we want to install few vents of those whirlybirds one. Suggest how much it will cost us and when can you do it.

The roof vent was fallen off due to wind, would like to install a new one

I want to install Roof venf for tiled roof - single storey

Need a professional to buy and install roof solar ventilation

Install 2 roof ventilations including suppling them

I wanted to install one solar roof vent in my double garage/shed. It has tin roof. I also wanted another solar vent installed in the main house with tiled roof. The vents are from Solar King roof vents from Melbourne.

I need the folling installed on a tiled roof, single story, roof incline is 30deg. 2x Bradford Airomatic 1x Bradford Static roof vent 6x Eave Vents - No electrical work required, power points already installed. - Airomatic Vents and Staic Vent Valve supplied. - Install location already identified.

Looking for a roof ventilation installation

We would like to install additional ventilation for the roof.

My roof ventilation fans are having squeaky sound, so I need someone to climb up to the roof to check and get rid of the noise. May need fan replacement or just applying some lubricant.