Find an experienced handyman in Subiaco

I have roof racks on my car and need a kings awning attached, unfortunately don’t have any tools but have the mounting kit and screws

Looking for someone to assist with installation of equipment. We install hyperbaric chambers and our installation technician needs assistance unpacking and moving equipment around. All equipment is on wheels, so there is no lifting and carrying, just manoeuvring. We will be operating as a team of 3, so need two people to assist. Will only need assistance for 1-2 hours

I’m renovating a property and for part of the renovation I would like to build a small stud wall (maybe 1.6 meters long and 2-3 meters high) to fill in part of the verandah. Following this, I’ll need the interior lined with gyprock and the exterior with blueboard (or we can finish according to your recommendations). Also including plastering and cornice.

I have lengths of 2.4 skirting need 27 metres of board to be put around living area would need to be direct stuck as it is onto concrete walls - also remove clothes line from balcony concrete wall

7 Door handles and kitchen cabinet handles to be installed, one queen bed dissembled

Stair case rails need to be painted Door Frames need to fixed

Seeking Handyman for painting, installing blinds Must be billed through NDIS please

To finish installing bathroom cabinets and clothesline

Need an handy man to do some fixing

I have some small works to do at my place, like fixing the door handle,

I’m looking for someone experienced to help with a few hanging/installation tasks around the house. The jobs include: Hanging a medium-sized mirror in the laundry (above/behind the sink) Hanging a few smaller pictures throughout the house I’d like someone who can measure, level, and place everything correctly so it’s positioned evenly and looks balanced in the space. Ideally looking for someone who can complete this within the next week or so.

Twin front pedestrian steel gates no longer close and latch properly because the gap between the two brick side pillars has reduced by approx 10mm at the top vs the bottom due to street tree roots. Hinges can no longer be adjusted to accommodate. Would therefore like the RHS gate to be modified so as to reduce its width by ~10mm. This will involve cutting this amount off each of nine internal 10mm steel rods and the top and bottom frame, grinding back the stumps, re-welding the shortened rods back to the gate frame, and re-Installing to ensure normal gate and latch operation. Owner will re- paint as required.

I’m looking for someone experienced to help with a few hanging/installation tasks around the house. The jobs include: Drilling and securely hanging a floating entertainment unit Hanging a medium-sized mirror in the laundry (above/behind the sink) Hanging a few smaller pictures throughout the house I’d like someone who can measure, level, and place everything correctly so it’s positioned evenly and looks balanced in the space. Ideally looking for someone who can complete this within the next week or so.

I need a floor to ceiling gyprock stud wall for a bedroom designed and built in my home. Carpenter/gyprocker

When I move fridge, accidentally scratch the wood floor, just need to make it cannot see by the landlord is ok

I need a proper external lock installed on my timber gate in Subiaco so I can open and lock it from both sides (like a normal external door). Job includes: • removing the existing latch • installing a deadlock or gate lockset (key both sides) • drilling/chiselling the mortice in the gate • fitting the striker plate into the brick pier • making sure the gate closes smoothly • sealing any old screw holes Gate is solid timber and easy to access from both sides (photos attached). I can supply the lock (Lockwood 355 or similar), or you can supply one.

Single window frame needing painting

Patio door two fly screens

I need 3 benchtop sections joined. It is a U-shaped kitchen and the cupboards are all installed and levelled. Two mason's mitres are required plus a butt join on a longer section. Underneath will ideally require benchtop joiners (joiner's screw) to be routed in. There is an option to do the cutouts for the sink and hob, but not critical.

While using the blind, we heard a spring-like noise. One side has detached from the tube. Looking for someone who can refit the blind, thanks!