Find experienced local fencing contractors in Subiaco

Looking for a carpenter or experienced handyman to repair an old timber side gate at a Subiaco property. It is a heavy ledged and braced gate, arched top, hung on a timber post fixed to a limestone wall. The gate swings inward. ISSUES: 1. The gate has dropped and now rubs on the closing side so it does not shut properly. The existing pin-and-strap hinges are worn and rusting. Both hinges need replacing and the gate rehung square. 2. The ring handle has come off and the latch no longer works. The timber around the old handle is split and the screw holes are chewed out, so it needs making good before new hardware is fitted. 3. There is a split with some rot at the top of the closing stile that needs cutting back, filling or splicing, and repainting. SCOPE: - Replace both hinges with heavy duty galvanised or stainless through-bolted hinges and rehang the gate square so it closes and latches cleanly - Repair the timber around the handle and at the top of the closing stile - Supply and fit a new two-part gate latch (D&D LokkLatch Deluxe S3 or equivalent) that operates and locks from both sides. Pack out the latch post with a hardwood mounting block if the existing face is too narrow. - Refit the existing cast ring handle as a pull, repairing the split timber behind it - Plane the closing edge only if genuinely required after rehanging, and seal any cut edge NOTES: - Please diagnose and correct the drop first. I do not want the gate simply planed to clear the rub. - Hardware will be supplied, or quote for it separately. - Please bring your own tools, and a small offcut of hardwood in case the latch post needs packing out. - Must be comfortable working with older timber and fixing into limestone or render if the post needs attention. - Happy to send photos of the hinges, handle and closing stile.

Wood paling fencing to be replaced in 6-7 sections damaged in recent storm. Damaged fence has been removed for safety. Approx in total 30m x 1.8m.

Wooden gate door hinges are broken and not being closed

I need 2x Victorian Ash gates built. I can install the Perspex sheets, handle, hinges myself. Price for manufacturing and timber supply only. Send through your prices. Only offer if you can do a professional neat job. Thank you.

I need 2x Victorian Ash gate built. I can install the Perspex sheets, handle, hinges myself. Price for manufacturing and timber supply only. Send through your prices. Only offer if you can do a professional neat job. Thank you.

After a gate supplier for supply and install of a double car width or larger, manual or automatic gate.

Needing some lattice works in between limestone gaps. Hoping for a painted panels replacement. Measurements as follows: 1@2055/255mm 1@2535/520mm 1@2530/520mm 1@2795/520mm 1@2650/520mm 1@905/520mm 1@1350/520mm 10mm horizontal framed and painted.

To drill tek screws into a Colorbond fence and attach stainless steel wire to form a lattice

Remove Asbestos and replace with colourbond fence. 12 meters long.

Repair Decorative fence features. 7 and a half custom timber arches need to be cut and replaced (approx 390mm x 240mm each). 5 x Post top timber trim to be replaced (just made from 42mm ovolo beading). Few minor repairs to rest of fence. Paint fence once complete. Price to include materials.