Find a professional outdoor blinds contractor in VIC

I have a Pergola at the back of my house, with blinds filling in the sides. 2 of those blinds are remote controlled for open/close while the rest are manual. Need an electrician to help connect the 2 remote controlled blinds with power. There is a nearby power socket available within a couple of metres to extend power from. Photos attached.

I have a 3.6m x 3.0m 3 Spaces area that I would like to cover with a tarp or clear PVC cover. I would prefer one side to have a zipper so I can access the garden easily. Could you please provide any suggestions and an approximate cost? It needs to be strong enough to withstand windy conditions. At the moment, I am using Bunnings poly tarps, but they don't fit well and are not holding up properly in the wind.

Replace existing silicon seal around bathroom shower closet Remove existing and replace with new outdoor blind for balcony All round the house small maintenance jobs, repair Price negotiable

I have three outdoor blinds to have bolts and one fence door to be latched

I am thinking of putting an outdoor blind for my outdoor setting to keep the sun, wind and rain out. I need to understand the quotations, estimated cost and time frame. Are there any call-out fee? Warranty?

Replace a outdoor blind gear box

Needing a frame built for outdoor blinds 5m wide 3m long. Bushes in picture will be removed, blinds will need to be installed.

Need two outdoor blinds for alfresco

Outdoor Blinds to enclose the pergola from 3 sides. Including automatic ziptrack

Hang 4 customer supplied outdoor blinds

Hi. I'm looking for Outdoor Blinds Specialist to put up waterproof Blinds in my house. (It's two sides) measurements are 11.1fts and 8.3fts.

Need help to install some outdoor cafe blinds purchased from bunnings.

Remove 2 old outdoor blinds and fit the new ones

Outdoor blinds have come away from the track

Install 1 small 120 cm Outdoor Blind (Already Purchased) + Guide Hoops in Alfresco. Left side (pillar): The blind will be drilled and fixed onto the front/outer face of the alfresco pillar — the face that is visible when standing in front of it. The blind will slightly cover the front of the pillar when viewed straight on. This is a solid pillar so direct drilling is fine. Right side (wall): There is a wall on the right that runs perpendicular to the blind’s direction. An L-shaped bracket (may be needed) to be installed on this right wall to create a mounting point in the correct direction for the blind end to fix onto. Additional fittings: I also need 2 guide hoops installed — one at ground level and one at mid-level — to keep the blind held in position and prevent it from billowing or sagging. Please note: • Blind is already purchased and on-site • Masonry/brick drilling required • Tasker should be comfortable sourcing or fabricating a suitable L-bracket. Or guide me to purchase the right one before the installation date. • Please ask for photos before quoting — happy to send them

Put blind back up! Would be best to bring a ladder- don’t have one. Tool shop across the road I will buy anything needed.

I need a Coolaroo outdoor blind from Bunnings installed on my apartment balcony. It’s a recessed, semi-enclosed balcony and the blind will be mounted inside the balcony opening. This is the blind (but in the darker colour) https://www.bunnings.com.au/coolaroo-2-4-x-2-4m-graphite-crank-operated-outdoor-blind_p0334441. It will leave a gap either side of the opening, hoping to get these as equal as possible. You will need a step ladder, appropriate drills bits for masonry/metal. I have attempted to install myself and failed! All but one part is missing (a plastic wall anchor). Happy to send more photos if required.

Hello I would like to remove all the outdoor blinds asap. They are all weathered and old . Disposal not needed as I will organise this

TASKS: 1. Reattach outdoor blind to bracket. (If not possible or it is broken, then just leave it and tie up with string). 2. Open four outdoor blinds/shades. They are down. (I do not have the long stick to open them, so you'll need to use any tool you have.) 3. Remove from site a small amount of rubbish around the deck; per photo (a camp chair and small rubbish). EST. TIME: 20 minutes. TOOLS: Spanner or similar to turn those blind knobs. LOCATION: Ground floor outdoor commercial building on Western Beach Rd near The Carousel. Location provided on acceptance.

I have 3 outdoor blinds that need to be fitted. 1.Blind 200cm wide [deck] 2. Install brackets x2 and hang blind 116cm wide [side window] 3. Install brackets x4 and hang blind 240cm wide [back window