Find a professional gyprocker contractor in Sydney

Need to drop ceiling 30cm I want new gyprock ceiling 100sqm beauty salon

Old leak fixed but never painted over, looks like gyprock ceiling

Need a professional plasterer to finish the joints of gyprocked areas so it's ready to paint. Please note the gyprock installation was completed by us, so there may be more imperfections than usual. Room 1: 3.6m x 3.3m Room 2: 3.2m x 2.8m (including ceiling) Stairs/Hallway: 0.8m x 3.2m All materials will be provided. Please refer to the attached photos for more details. Pls comments with your proposed cost.

We removed sliding door wardrobes in two bedrooms and cut the gyprock 30 cm higher in one room and 20cm higher in the other room. We need the cut part of the wardrobes patched and plastered before the new ones get installed on 7 October. We will paint once you are finished.

Some holes and scratches in gyprock walls need to be repaired , nothing bigger than 100mm squared . we have the paint required for painting over after

I have done a lot of the gyprocking and have hit my limit. Need someone to come and finish the job. - all walls are double gyprocked with soundcheck - need someone to come finish the job in the inside + plus setting.

We have purchased a 32-inch Samsung Frame TV and wanting it to be mounted on existing gyprock wall in kitchen/dining area.

Repair/replace gyprock after kitchen sink and cabinet removal. Only need the gyprock replaced. Do not need taping or application of jointing compound

Need to move 1200 x 3000 gyprock sound check up some stair at an annoying angle. Need strong and professional.

I need a someone experienced in gyprock/plasterboard repairs to fix the 15cm hole in my ceiling so it blends seamlessly. Scope of Work • Cut and neaten hole edges • Install backing support if required • Fit a plasterboard patch • Tape and apply joint compound in layers • Sand smooth and finish flush with ceiling • Prime and paint to match existing ceiling colour Location: Haymarket • Ceiling is standard height • You will need to bring tools and materials • Paint needs to be colour matched

Approx 43 sq metres of ceiling and walls in Marrickville. Finished ready to be painted.

We had a roof leak earlier this year and water got into our bathroom.We have fixed the roof and now need the gyprock repaired / replaced in the damaged section and the repair painted.

Electrical. Supply and fit Hex LED shop lights on gyprock panels

I need someone to get some gyprock sheets and deliver them two blocks over. I’m very close to Bunnings warehouse. I just need them today and I don’t have means to transport - about 12 sheets cost of materials not included in price of job :).

Looking for a carpenter to install timber panels directly on top of two existing gyprock walls (floor to ceiling). Experience in installing these types of timber panels is preferred, as there will need to be some cutouts made for power-points, and the ceiling height in the room varies in different spots. The timber panels are thin wooden slats on a stiff felt backing. - The walls are Knauf Soundstop 13mm plasterboard. These are mounted on timber frames and studs. - The timber panels are from Delaco Panels and have already been purchased - these are on site ready to go. - The location is Redfern 2016. Parking is available on site (2.1m clearance). Timber panels link for reference - https://delacopanels.com.au/products/natural-oak-premium-colour Wall 1: 5150mm x 2600mm Wall 2: 3600mm x 2660mm Each panel is 600mm x 2800mm You will need to provide: - Your own tools for cutting the timber to length, making cutouts for power-points. - Adhesive and screws to mount the timber panels onto the walls. Thank you.

Looking for cheapest quote

We need to install this table to a meeting room in the office. "The Wall Mounted Booth Table can be installed using a drill by itself, however, we recommend an experienced builder installs the restaurant table as you will need to ensure that the fixings are secured into solid timber in the wall. Each order comes with handy instructions too. " Length: 47.2″ (120 cm) Width: 27.6″ (70 cm)

1. Cut gyprcok wall (direct stuck to block wall) 2. Install 10 angles (needs to be level for 2x shelves) 3. Re-plaster around angles / set and sand ready for paint. Only materials supplied will be angles, fixings for angles and plasterboard.

Gyprocker to base and top coat two walls. 1st wall 4m long x 3.2 high. Wall will have a door in center 2nd wall 2m long x3.2 high Base coat and top coat on site No sanding Must be done on Friday.