Find a professional gyprocker contractor in Sydney South

Gyprock wall 2100/3300 with 3 corners needs jointing. Corners are done and It is ready to go now, access would be 6am to 12pm.

“Hi, I need a small gyprock wall hole repaired and painted in Sydney CBD. Could you please give me a quote?”

There is a gyprock wall, need to patch and paint a cut out of 50 mm x 50mm. Need to be done today before 5 pm. Paint available on site. The card reader will be moved, hence we need to patch

Airtasker Job: Gyprock + Furring Channel Work (Ready for Paint) I need a gyprocker to complete the following works: 1. Pelmet + Blind Concealment • Install furring channels and steel studs along the ceiling line. • Build a pelmet structure to fully hide a roller blind. 2. LED Feature Wall Preparation • On the section highlighted in the reference image, install furring channels behind the existing wall so the electrician can run an LED wire internally and keep it hidden. • After the electrician completes the wiring, return to sheet the wall with new gyprock. Finish Required: • All areas must be plastered, set, sanded, and finished 100% ready for painting. Requirements: • Neat, professional framing and gyprock work • Ability to coordinate timing with my electrician Reference images can be provided to show exactly where the yellow and green sections need to be completed.

Need to do a full ceiling and wall. Commercial job, need to get pricing for it. Job starts soon.

I need a someone experienced in gyprock/plasterboard repairs to fix the 15cm hole in my ceiling so it blends seamlessly. Scope of Work • Cut and neaten hole edges • Install backing support if required • Fit a plasterboard patch • Tape and apply joint compound in layers • Sand smooth and finish flush with ceiling • Prime and paint to match existing ceiling colour Location: Haymarket • Ceiling is standard height • You will need to bring tools and materials • Paint needs to be colour matched

Demolition Floating Gyprock Wall and remove waste. Wall is approximately 1.6m high by 5m long

Suburb: Sydney, NSW, 2000 Date of Work: Saturday, 7th June Looking for a licensed electrician to install three (3) power points on a gyprock wall. There is already an existing GPO on the opposite side of the wall. The wall is standard gyprock. See attached reference image for the exact wall and the exact highlighted area. Please bring all necessary tools and materials.

2 x patches where gyprocking has been cut out need fixing. 1 x area is approx 40cm x 40cm and has existing gyprock piece, no need to bring your own 1 x area is approx 3 m long x 15cm-20 cm wide, you may need some offcuts patching and 1 coat of paint required (ceiling white or similar)

Patch up Gyprock holes in ceiling - Due date: Flexible

Require proper repair and re-enforcement of the small areas displayed in the picture. Needs to be properly fixed so it is strong enough to support new blinds that will be installed in this area. Also require touch up after work is done with paint. Paint will be provided but you may need to bring your own brush. The wall is made from Gypsum so this is a classic Gyprocker task. - Due date: Needs to be done on Sunday, 26 March 2023

We have an acrylic sign that needs to be mounted to a gyprock wall. Sign is approx 60cm x 90cm. - Due date: Before Friday, 27 January 2023

Leakage in the roof cause gyprock to fill up with water leading to massive hole in roof.