Find an experienced door installer in Melbourne

I would like you to change the door knobs on 3 internal doors and front and back door

The door does not fit neatly in the frame. And I will also would like to install it in a way that it can be closed (attaching pictures of the door itself, and the locking mechanism). Might need some extra padding too (the black foam).Ideally someone with experience installing Pet Doors. One way to do it, will be to cut a few cms of the top of the U shape metal part that has the springs that make the door tighter, as it currently can't be passed to be fully in place within the rail of the sliding window. We can also see if it can be fixed in place in the rail next to it (as shown in here: https://www.youtube.com/watch?v=HZGSXc0dMXI). Probably having the option to lock it directly is preferred. Ideally Wed 18th after 3pm, or can do Friday morning if needed (ideally around 10 AM) - open to discuss other times

Super tough pet door medium (see images)

Hi, I am looking for a carpenter to install 2 jambs for a single door. I have the jambs ready (ordered slightly longer than needed so one cut needs to be made on each) The task involves: > Remove existing MDF jambs (please do not cut these inside) > While old jambs are off, check if anything is water damaged behind and repair/replace (can pay extra) > Install new jambs > Reinstall door & strike on new jambs > Recaulk any gap between new jambs & walls/tile. There is no architrave , but a small section of wall above the door (see pics with arrows). The jambs run along this at the top, so this section of plaster may need to be removed in order to install jambs and replastered after? Please let me know if you can do the whole process. I am looking for someone quaified, careful, and experienced. Also who has some reviews and pics of previous work. Thank you 🙂

The door will be removed in the morning and the new door has to be installed around midday

I’m looking for an experienced carpenter/cabinet maker to complete the final installation of two custom solid Tasmanian oak sliding wardrobe doors. This is a top-hung system (not bottom-rolling), so please read carefully. Overview - Qty: 2 sliding doors - Material: Solid Tasmanian oak (raw timber – no finishing required) - Size (each): 2510mm H x 1170mm W x 30mm T - Weight: Heavy solid timber What’s already done (~90% complete) - Top track is fully installed and fixed - Doors are already built to size - Opening/walls/floor are square - Flat timber floor (no slope) - Wardrobe carcass is complete Key clarification (important) This is a top-hung sliding door system with a low-profile floor guide, NOT a bottom roller/bottom track system. - Doors hang entirely from the existing top track - Bottom only needs a small guide to prevent lateral movement - Total clearance available: ~30mm (sufficient for this system) Bottom guide details - Low-profile plastic/nylon floor guide (shown in photos) Requires: - Routing a single narrow vertical groove into the bottom edge of each door - Fixing the guide to the floor - No bottom rollers, no full bottom track, no 50–80mm clearance required Scope of work - Route narrow groove in bottom of both doors - Supply & install suitable low-profile floor guide (or use supplied one if suitable) - Hang both doors on existing top track - Align/adjust so doors are plumb, stable, and slide smoothly - Install stops if required - Clean, professional finish Ideal person - Carpenter or cabinet maker - Experience with top-hung sliding doors - Confident routing grooves in solid timber - High attention to detail Photos provided: top track/hardware, floor guide, installation diagram, and wardrobe setup. Please quote including labour + any small hardware required. This should be a straightforward finishing job for someone experienced with this system.

Install replacement door seal for Electrolux Washing Machine. Model EWF14922 Inverter 9KG

Hi! I have a new washing machine that won’t fit through the door to the bathroom. I need the door taken off, the washing machine put into place and the taps connected, and then the door replaced. Thanks!

Dog door installation Dog door supplied

Install a dog door into double opening doors on Hannah Dog website. It says that it is compatible but not recommend recommended but it can be fitted into the double doors. Please see photos attached. The Dog door has already been constructed therefore only needing someone to insert the door into a rental property and will not be able to be drilled but will have instructions on how to insert door for a rental property that’s fixed in place

Kitchen door hinge and wash room hinge

Install a sliding lock at our restaurant in Flinders Lane. Must be done today or tomorrow. Must bring the lock, happy to pay for the item.

Lost key to my rear garage door, need to replace it with a new lock. Can provide lock (will do Bunnings trip), just need someone to open the door and replace the lock.

Need a latch when I lock the door like a sliding lach as extra security

I need 8 door handles installed(see pics) A fallen bookshelf fixed (pic below) and Light provided and changed - think the ceiling is over 3m high and i cant reach it Would prefer this done today but tomorrow is also ok

Hi, I am looking for a service to replace the 10 door handles. I have bought 10 new door handles sets. Wanted to set it done on or before 22 October 2025. Please refer to the photos attached. The silver door handle needs to be replaced with the black door handle set. Thank you.

6 doors that need door handles installed.

Reinstall door handle that has come apart have all the parts

We need a door frame and jams built to then install the door and lock we already have to close up access to the area -existing opening measurements are estimated at 1000x 2130 -door we have to be installed is 820x2040 -door handle and lock will also be supplied just need to be installed Need this done ASAP

I want someone to come and fix the door and align the new hardware that I bought, I’ve already installed but they need abit of adjustments and install 3 door stops