Find reliable curtain rod installation services in Sydney

Install a curtain rod into a concrete wall. I have the ladder and curtain rod parts.

Curtain rod bracket is coming apart from wall and needs to be re- screwed in. New screws may be needed

What I need done: 1. Curtain Rod Installation • I want to hang two curtain rods side by side (front of garage) across one section of the garage. • You’ll need to: • Come by to measure the space • Head to Bunnings (or similar) to buy suitable rods and brackets • Drill into a basic brick wall and install the rods • Hang the curtains (I’ll supply the curtains) 2. Fold-Down Shelving Installation • On both sides of the garage, I want fold-down shelving (so I can fold them away when not in use). • Ideally you’ll: • Help source suitable fold-down shelf brackets (Bunnings should have them) • Install securely into the walls • If fold-down shelves aren’t available, install regular shelves instead.

Bought a Curtain Rod off amazon, need it to be installed in the bedroom. Thanks! Approximately 2.74m high. Curtain rod is approximately 3 metres in length (although length between hangers will be approximately 2.5m). I already have the hangers and screws. Not sure what the wall is made of sorry (but I assume brick)! It is an old house if that helps. The curtain rod is to be installed to cover the entrance of a nook in the bedroom (not the individual windows, see attached image).

My curtain road bracket - previously affixed using drywall anchors - has fallen off the wall. One of the anchors has pulled some drywall off, creating a bigger hole. Ideally - I'd want the curtain bracket screwed into a stud/header/brick rather than just anchored to drywall. However, I don't know what's behind the drywall. As seen in the photo, there is some sort of perforated metal sheet just above the window, and additionally another metal sheet towards the top of the wall. This doesnt leave enough room to use a toggle bolt anchor. There is 19cm of space behind the drywall until you hit another structure (see chopstick photos) The holes might need to be patched and the bracket position moved elsewhere.

Hi! I need help fixing a curtain rod holder into the wall. I already have 2 brackets up see picture – just need the third one installed to support the rod properly. The spot where it needs to go looks like it was patched up by a previous tenant, so it may need to be re-drilled.

We have a few pieces of Ikea furniture that need mounting: - 1 eket, to be wall mounted (fibreboard with concrete behind it) - 3 curtain rods (VIDGA) to be ceiling mounted (concrete ceiling). One needs to be cut into two and connected to the other two (Ikea says this is easy to do with a hacksaw - see details here: https://www.ikea.com/au/en/p/vidga-single-track-rail-included-ceiling-fittings-white-00492917/) - 2 picture ledges (mosslandia), wall mounted (fibreboard, not sure if it's concrete behind it)

2 x curtain rods purchased and fitted - 212cm high and 183cm wide. 1 x curtain rod purchased and fitted - 120cm wide and 108cm high. 2 x fly screen curtains purchased and fitted - 20cm wide and 108cm high.

Help hang up a curtain rod in gyprock wall. Is in a hotel and only for the long weekend (styling a special room for an offer). We have the rod, but need to supply 4 button head screws to go into wall and hold the mounts up.

I cannot put curtains up because the wall is cement, I need someone to mount in three rooms

Pick up curtains rods from Bunnings Alexandria NSW and install in 4/4 Goodlet street Surry Hills

Hi, I need a curtain rod to be drilled into the wall in my living room. Super easy job. Only need drill and screw it on the wall. Please no unrealistic prices x

We need some curtain rods put up. Drilling in to concrete in our office space in Alexandria.

1x 280cm Rod (It’s already been cut to size) attach with 1x wall Bracket and 2x end brackets (Example photos attached) plus 1x200cm Rod attach with 1x wall bracket and 1x end bracket

Need curtain rod hooks screwed in for curtain to be hung up

Instal Curtain Rod - installation of curtain rod - must be finished to a high standard and to my satisfaction, ensuring the rods are even and close to the wall - see instructions below - https://images.salsify.com/image/upload/s--lPPwkEgg--/otyvjwuppyzihtajuubn.pdf Assemble Infrared Panels in Floor Stand - instructions for this suck, but see pictures - needs to be completed so that the panels are installed, as per the instructions, and can be used on the floor stand - or installation on the back of a door, will need to see what is best -if parts are missing, you will have to wait for me to get additional screws or similar items and then complete the work, but I think everything required is there (instructions suck) Remove Screws from Wall - remove approximately 15 screws from wall, may be more, may be less You will need to provide power drills, as well as a way to measure levels

I need multiple shelves installed floating and kitchen shelves. Also need a curtain rod installed.

I have the curtain rod and parts. I attempted this myself. The wall is very very hard and it was difficult to drill the holes correctly. I need someone to cover the existing holes with filler. And measure and drill the holes correctly and install the curtain rod. Hammer drill may be required. I have one if needed.

Hang several light shelves, curtain rods and rails, and one picture. Red lines show where/how many.

I want to get a curtain rod installed in my apartment. However, the walls are concrete, so I don't feel confident doing it myself. I want the Tasker to provide the right hooks/screws/bracket and/or whatever is needed to install the curtain rod, with the right tools for concrete walls. Must have installed curtain rods in concrete walls before, and must be confident you can do so without causing any damage. Thanks!