50 Cement sheeting installers in QLD

Require roughly 7m2 of 16mm cement sheeting on floor, over existing yellow tongue and wood. Tradie to supply material. - Due date: Before Friday, 5th Nov 2021

I require cement sheeting to be attached to an existing timber frame. Wall 1. 1110 wide x 1990 high, wall 2. 1110 wide x 1740 high. The two sheets are 1200 x 2400 and will need to be cut. - Due date: Needs to be done on Tuesday, 28th Sep 2021

Painting cement sheet walking inside and out on the Gold Coast - 2 coats approx 150m

1. Remove 9 x damaged cement sheeting (approximately 2.7m x 1.2m x 9mm) 2. Supply, paint (color match) and install new ones.

Replace a damaged cement sheet in carpark. Pitched roof, 4m high. (2130 x 1220 x 4.5mm sheet)

We need someone to supply fribo cement sheeting come to the property and cut to measure to sheet under the Queenslander as per images under the bottom and screw to battens. Then silicon at bottom and around the sheet to avoid water coming in. Check images for reference please. Total length approximately 15 metres x 45cm high. Monday or Tuesday is ok.

Need someone handy to install or replace cement sheet on the soffit.

Hi I have had water damage from overflowing roof gutter and unfortunately it flooded the ceilings in the outdoor section and in the eaves of a small portion of the ceilings. Would need re-sheet in some areas and repaint. Please send in quote

Hey taskers! Would love a handy Andy to replace some fibre cement sheets please. New wardrobe going in and water damage found during demo. Just the one back wall inside cupboard no flooring needed. I don’t havr any materials. Has to be FC as backs onto wet area. 2438w 2436h Also need some plasterboard over a hole that goes right through the wall from one room to the other. About 50cm x 25cm Pics attached. Need done either this afternoon or tomorrow please in Palm Beach. Thanks!

Needing approx 30 cement sheets delivered from Caboolture to woody point. Sheets are 3000x1.3

Pick up and take wherever able some fibre cement sheeting boards that weren’t used during building. And a sliding glass door as well.

We have a new outdoor cement sheet wall that needs 2 undercoats. The wall is 2.7m high and 9.6m long and 15mm thick. The top needs undercoat and the top back joins of each panel which is only 300mm high. I really need this done today (Thurs) or tomorrow.

The front porch ceiling needs replacing 2250 x 1800

Large 40cmx40cm hole in wall (cement sheet FC sheeting). Also a small additional crack in the wall in another spot. - Due date: Before Friday, 31st Dec 2021

Putting up cements sheets under a balcony. - Due date: Flexible

I need rendering done to the outside of my house. Best to come and see it to price it

Area is approximately 4m x 1.5m. Needs to fit around 3 downlights.

Laying down of fiber cement sheeting and gluing them together and then taping them. This will form a basis or floor for the erection of a shed.

I have a hole near my front door that I need to have patched up. (Doggy door removed) Will need to supply sheeting etc.

- Need help from someone experienced in wall and soffit installation - the “soffit” job is a metre off the ground so no need for ladders - I am happy to buy the materials, help you measure and cut them if that makes it faster (I had HardieFlex in mind) - Flexible with time