Find a professional gate installation in East Melbourne

Driveway gate usually shuts properly but not every time

I need to reset 4 remotes

The pool gate doesn't close by itself. Two door hinges need to be replaced. The magnetic latch sometimes doesn't work properly—it seems the magnetic force isn't strong enough. Does it need to be repaired or replaced?

I need help unlocking a padlock on my side gate (see attached photo). I don’t have the original key and need someone to either unlock it non-destructively and make a new key, or replace the lock with a new one that comes with keys. What I need: - Unlock the existing padlock - Either make a spare key for it or replace it with a new lock (with keys provided) - Please bring the necessary tools Please let me know: - Your experience with locksmith or handyman tasks - If you're able to provide a replacement lock (optional) - Your quote or estimate

Steel gate post with three simple hinges; each hinge consists of a barrel fixed to the gate, and a pin fixed to the post. Each of the three parts attached to the post needs an additional 50mm x 50mm x 5mm thick plate (provided by customer, shown in blue outline) welded with 5mm cfw all round to strengthen the connection of the pin side of the hinge to the gate. An additional short bead of weld to back of existing plate also required (shown dashed, in red). Customer will remove gate for good access all round. Prep’ including local brushing back of paint on existing metal needs to be included in quote. Single phase 240V power available. Customer to paint after completion.

Install new gate motor as discussed - View all the details of this offer: https://www.airtasker.com/offers/01JXS4ZGZRQ11CDDBGS5YN5M8N

Replace lost key for auto gate motor

One side of our automatic front gate (right-hand side when entering) is currently not closing properly. The gate motor unit appears to have come loose or partially detached from its bracket, and as a result, the gate won’t align or close fully.

Looking for someone to safeguard this sliding gate with maybe an hard plastic cover etc while still allowing it to open and close. Our dog keeps getting underneath it and cutting herself on the jagged edges.

We need to replace hinges on a steel framed gate & lift higher on timber supporting post. Car backed into gate (nightime) as gate got stuck on ground & didn't fully open. So gate needs to be lifted higher on timber posts & electric gate system to also be moved higher on to post

My driveway entry gate is not functioning properly and needs attention/service. It’s an automatic sliding gate powered by a Tau K100M motor. See photos. The gate will not open without manual effort as the cog on the motor will not grip on the gate frame (to pull and slide it open). It closes no problem. I have a video that shows this clearly. I’ve examined the parts and there doesn’t appear to be any wear and tear causing this.

We need one of our automated gate brackets welded up before it breaks off. The other one is fine. We only have normal 240v 10AMP power. The other gate is fine as it was already fixed.

I need a retractable pet gate installed in the kitchens. Hardware is included in the box. Drill required.

I have 3 outdoor metal gates (1 front entrance gate and 2 side gates) that need adjustment. They were all working fine before, but due to minor alignment shifts over time, they’re no longer closing properly. All hinge are same type as pictured. The front gate is now very tight and difficult to operate. The two side gates aren’t closing or latching properly. Looking for someone experienced who can realign and adjust the gates so they open and close smoothly again.

Metal Gate fixing loose - need to permanently secure the fixing as attached. Tack Weld the screw/washers to the metal post Minor Alignment of gate

As per council inspector, I need to reduce the gap between the gate and the glass panel to not more than 10mm. The pictures are attached. The current gap is closer to 20 mm. The next inspection in on Friday 28th March, so I'd like the work done with time to spare.

My old metal carport swing gate is not closing properly due to poor installation in the past, plus general wear and tear. Looking for repair work on existing gate, not a replacement.

1 outside gate hinge door need realignment to locking mechanism

Looking for a reliable and experienced handyman to assemble a 5-metre fence with a small gate. All fence materials and the gate are ready on-site. Labor only – no materials needed. Job Details: • Assemble and install a 5m fence • Install a small gate • Ensure the structure is secure and level Location: Doncaster Job Type: One-time task Required Skills: Experience with fence installation, attention to detail, and proper use of tools Please bring your own tools if necessary. If you’re experienced and available, please make an offer!

I need assistance replacing the rotten wood and re-hanging a gate that has collapsed. The wood on each side of the gate that is attached to the fence and the house is completely rotten and needs replacing and re-attaching. The gate will then need to be re-hung and aligned. The gate and each bit of wood that it is attached to are approximately 210cm tall.