Find a professional gate installation in Kew VIC

Need this fence railing to be turned into a gate to access this mini deck. Most likely cut and weld job? 🤷‍♂️

Looking for an experienced carpenter, fencer, or handy person to supply, build, paint, and install a pedestrian side gate between our house wall and the boundary fence. Task Details: Dimensions: Approx. 120 cm wide x 1.8 m high (matching boundary fence line; site check required). Frame & Cladding: Rigid steel frame (adjustable kit or welded box frame) clad in vertical treated pine palings/battens to eliminate sag. Finish: Painted/stained in Colorbond Monument to match fence and wall cladding. House-Side Fixing: Mounts against the vertical clad wall section (past masonry corner). Must anchor into internal wall studs using structural screws or use an independent post to avoid damaging cladding sheets. Fence-Side Fixing: Securely anchored into existing boundary fence post/framing. Ground Clearance (CRITICAL): Must be puppy-proof. Install a low-profile timber plinth across the gravel so the closed gate has <25mm clearance without dragging on stones when opening. Lock & Latch: Double-sided key-lockable gravity latch (e.g. D&D LokkLatch Deluxe or ProtectorAl G8Safe). Tasker to Supply: Steel gate frame (or adjustable frame kit), Treated pine palings/battens, posts/timbers, and base plinth, Colorbond Monument exterior paint/stain, Heavy-duty hinges, double-sided key-lockable gravity latch, and structural fixings What to Include in Your Offer: - Confirm your quote covers full supply of all materials, latch, painting, and labour. - Briefly explain how you plan to anchor the post on the clad wall side. - Your availability and photos of previous gate installations.

2 welds required. I need to weld a gate post to a base plate and also weld a steel tab to the other post

I need a welder or metalworker to replace the two hinges on a wrought iron garden gate. This budget is for labour only. I will supply and pay for the hinges and fixings separately. Please do not include hardware costs in your offer. The gate: Single leaf, approximately 2 metres wide Open picket style, estimated 40–80kg Both the gate frame and the gate post are hollow steel square tube Street-facing front gate on a brick pier Existing hinges are old hand-made welded barrel hinges, rusted and worn Photos are attached — please look at them before making an offer. Scope of work: Support the gate, cut off the two existing welded hinges and grind the surfaces flush Weld the gate-side half of each new hinge to the gate frame. Tack weld and check alignment first, then complete the welds using a staggered sequence to avoid distortion Mark out, drill and bolt the post-side half to the hollow post using through-bolts with backing washers or plates, or rivnuts — not self-tapping screws alone, as the top hinge carries a tensile load Check the gate swings level, closes correctly and does not scrape Clean the welds and touch up all bare metal with cold galvanising primer and a matching topcoat Hinges: I will supply weld-on / bolt-on gate hinges rated to at least 150kg. Please tell me in your offer: What fixing method you would use on the hollow square post Whether you need me to purchase any specific bolts, rivnuts or backing plates so I can have them on site before you arrive I have a second gate of the same type. If this job goes well I will book you for that one as well — you are welcome to quote both leaves together if you prefer. Requirements: Own MIG or stick welding equipment, plus angle grinder, drill and metal drill bits Access to power, or your own generator Demonstrated experience with gate and fence welding — please mention similar jobs in your offer

replace hinge of self closing glass door

Front gate is hard to open and needs to be pushed with force to open. The post is too close to the gate and without getting a new gate, the post either needs shaving down or the door needs realignment.

Old iron pedestrian gate at front house in Kew, mounted to a brick pillar. Bottom hinge is missing but the gate still swings on the top hinge. new hinge really needed to match existing one or close to it. Two issues: Gate will not latch shut – latch and/or striker need realignment or replacement. Gate will not swing fully open due to raised ground from tree roots in front of it – need small adjustment/trim at bottom of gate to regain clearance. Looking for someone to restore both reliable closing and full swing with minimal visual change to the existing gate

Require someone to come out and look at our electric front gate that's no longer working. Not sure if the issue is mechanical or it's just off its tracks etc.

We need a magna lock replaced on a gate at our child care. We will also have ongoing handyman jobs on a regular basis.

Install custom swinging aluminium gate in front of pool equipment. Install only, gate, posts, brackets etc will be supplied. Specs as follows: Gate Panel 1800H x 855W - including 50x50 posts, brackets, d-latch and butt hinges Cut-to-size Fence Kit 1800H x 345W - one post fixed to brick wall, one post in middle and fence fixed to existing post

Fumigate roof space for mites + place rat baits

Fumigate roof space for mites ; Place rat baits

Two coats of Dulux Epoxy enamel ( Metal Shield) applied by brush over 2 days to allow for drying. Paint supplied by owner. Ground sheets must be used. One set of 2 driveway gates Each gate measures approx 2.0mx1.4m ie total 2.0 x 2.8m Tasker must be experienced painter.

-3.50 meter electric gate to be installed (inside post to inside post) -1.6 m high to match exisiting front fence -any style -need someone who can build electric gates and will have returning future work for them aswell

Install Automated Sliding Driveway Gate Size: 1630mm (H) x 3090mm (W) Style: Batten sliding gate (photos attached) We need a full supply and installation of a new automated sliding gate. There is no existing gate, so everything is required. Job includes: Supply and install gate, battens, track, wheels, posts, guides, stops Supply and install motor + automation (remotes/sensors) Ground prep + concreting as needed All wiring, materials, tools, labour Test and ensure smooth operation Looking for an experienced automated gate installer. Flexible with timing.

My front gate latch is not working. It appears to be a dual-sprung tubular latch that I purchased from Bunnings. If possible, next Monday would be highly preferable for the repair.

Front timber picket fence with remote sliding gate supply and installed (style of fence shown in second and third pics) Width of property is approx 7m.

Lock on side gate was purchased last summer but has jammed and I want it cut off / removed. I don’t want to have to unscrew the lock itself because I won’t be able to get a new one on

Need someone to re coil the spring on my front gate so that it self shuts.

Hi, the double gates don’t close properly anymore. I need them to close, have the bolts align into the grooves on the ground and have the horizontal bolt be easily secured. I also need two treads replaced on some play equipment.