Find an experienced flooring expert in SA

Renovating a house, need timber floor installed for living room, kitchen and two bedrooms, budget around $6k to $7k. Please advise what type of timber can be supplied. Thank you

Needing someone to measure my stairs and install a plastic runner/protector on carpet. Clark’s rubber has this. I will pay for the runner once we know length and just need someone to measure and place down and collect etc

Install 3D Acrylic Frontlit Signboard Christies Beach, South Australia Details: Need installation of a 3D acrylic frontlit signboard with two backboards at Smokey Joe’s Restaurant, Christies Beach SA 5165. Size: approx. 171" × 41" (434 cm × 104 cm) Height: ~116" from floor to board (295 cm ≈ 2.95 m) Location: Christies Beach SA 5165 What’s provided: Signboard (ready to install) What you bring: Tools, installation experience

Install 3D Acrylic Frontlit Signboard Christies Beach, South Australia Details: Need installation of a 3D acrylic frontlit signboard with two backboards at Smokey Joe’s Restaurant, Christies Beach SA 5165. Size: approx. 171" x 41" (see attached design) Height: ~116" from floor to board Location: Christies Beach SA 5165 What’s provided: Signboard (ready to install) What you bring: Tools, installation experience

Looking for vinyl flooring to be installed in my kitchen. I only want someone experienced in flooring. Measure and quote required first.

I need laminate flooring installed in a small unit - lounge/dining room and bedroom, approximately 40sqm. It will be going over the top of timber floorboards, that do not need levelling. I will supply the laminate flooring. Looking to have the job completed on Tuesday 8th of September, or Wednesday 9th of September. The photo is of some of the space - it will be the lounge/dining room, and bedroom. The fireplace will not be there. There is no existing flooring to rip up/dispose of. Happy to provide more details as needed.

Need someone to install the floating board floor for 1 bedroom as photo because this old floor was damaged

Cut out vinyl areas x 2 1m x 1m supply and install black safety vinyl

To remove old carpet and install new carpet for a duplex apartment on Rundle mall. Parking will be at loading dock at porters lane.

Need carpet laid in a 2 story student accommodation apartment in the cbd, carpet will be laid directly on the concrete without underlay for only 2 rooms and the skirting is feather edge which will be removed prior unless not necessary (1 bedroom 1 open area) Access is a bit difficult but carpet will already be there will only need glue and tools required to lay it

Looking for Someone to remove and install flooring (ASAP) We’re looking for someone to replace our old, broken flooring. We already have the materials – just need someone with the tools and skills to remove the damaged floor and install the new one. Job is ready to go and we’d like it done as soon as possible. Please message me if you’re available. Thanks

Description: Hi there, I’m looking for someone experienced in flooring prep and basic carpentry to help prepare a room for laminate flooring. Scope of Work: ✅ Remove skirting boards around the room ✅ Prime and pour self-leveling compound over approx. 16 m² of leveller to raise it by 8mm (materials supplied) ✅ Ensure a clean, level finish that matches the adjacent tiled area ✅ Install new skirting boards after leveller has cured (nail or glue neatly back in place) supplied ✅ Clean up the site after completion Room dimensions: Approx. 4.4m x 3.6m Materials Provided: Self-levelling compound Concrete primer Skirting boards Laminate sample for reference You’ll need to bring your own tools and mixing equipment (bucket, drill mixer, trowel, gloves, etc.) Looking for someone with: Experience in flooring prep / levelling Basic carpentry skills Clean and careful work (especially for skirting removal/reinstall)

We have existing floor boards that need to be pulled up to find some services and then relayed once the service has been found.

Please quote price per square meter to lay laminate flooring. Thanks

Underlay and vinyl ready for installation require vacuume of concrete and preparation and installation

About 100m2 carpet installation at Sheidow Park Sa,

Installation of laminate plank flooring

To prep and lay 50sm of floating floors

Install 32sqm of laminate flooring in shop

Need a room 3.6m x 2.4m laid with laminate flooring. All materials provided just need someone with experience to lay it and with appropriate tools to cut etc Will be further work if a good job is done as this is the first room to complete

Hi, I’m looking for someone experienced in epoxy flooring to work on my garage floor (approx. 35 sqm). The floor currently has an old epoxy coating that needs to be removed. Floor needs to be polished and ground to prepare for the new epoxy. Apply a new epoxy finish

110m² brand new floor in good condition

Recently had carpet removed from 2 bedrooms Need floorboards sanded and polished to match other floorboards in house Main bedroom - floorboards in very good condition (see 1st photo) Second bedroom - 2 areas where cement needs to be removed and floorboards replaced there. Priority is to have main bedroom complete. But hoping someone has experience with removing cement and replacing floorboards before sanding and polishing. Looking for someone with experience in sanding and polishing floorboards Happy to negotiate price based on work required

Old small home, carpet has been removed leaving timber flooring to be sanded and polished. Looking at 4 rooms and a hallway which together would be approximately 35 square meters

Some patches of wood has lost color that needs restoration/polished/resending (open to suggestions). I guess those 3-4 small patches can be sanded again (Preferred) or whole floor.

Sand and Polish FloorBoard - Small Area

The job is to sand stain and polish approximately 80 m² of flooring. It’s a level one building in Port Adelaide. The floorboards are Jarrah.

Sand and polish the timber floor

Sand and polish timber floors and put down quad

Sand and Polish floorboards and fix gaps in floorboards

I've had a slate base removed from under a combustion heater and now need the exposed concrete polished to match surrounding floor.

I would like to sand and polish floors in living room and 3 bedrooms. Please send me your quote.

Just checking there is a carpet to be removed

Remove carpet, sand, polish/coat pine floorboards in room 4.3m x 4.4m

polished concrete floor poured and polished? About 20m2 . New kitchen then to be installed on top by another trade. Approximate measurements of flooring area is attached on a ruff sketch Floor base u der .. the current existing floorboards and tiles are mixed particle board and concrete.. I think..!

We just bought a new (130 year old) house in Renown Park, most of the house is floorboards but the main bedroom is carpet on top of ground that was filled in with concrete. The room is 4.32m x 3.64m. ($5 budget isn’t accurate, just not sure what ballpark we are looking at so not sure what to put.)

23m2 of new polished concrete look floors.m for freelance floor polisher. Affordable counter offers considered. As I’m on a budget. Floors will need a thin layer of new concrete poured as I think the floors are particleboard? This I’m unsure of Current floorboards and old tile will be removed beforehand and not included in this quote. $1150 is $50 square metre x 23metrs.

1 bedroom pine boards to be prepped and polished. Existing nails would need to be removed and edging around the corners. Happy to discuss what oils or treatments that are used. 3.3m x 2.65m approx.

carpet lifter, floor sanding and polish room 3.3 x 2.9

Light sand and polish of internal pine floorboards

1 bedroom, hallway and living area to be sanded. Carpet will be removed prior with wooden floors premopped. Floor boards look in good condition and clean. But some patches of glue from the carpet underlay.

Removing carpet and restoring original wood floors

Sand and polish timber floors.