Find experienced hardwood flooring contractors in VIC

Sand and varnish (matte) also 1 minor repair (as per photo of a gouge). Engineered hardwood oak matte finish. Hasn't been sanded before. Only a portion of the house 4.5x 3.5m approximately of the kitchen/dining area.

Sanding down hardwood under belcony

We need hardwood floorboards installed in one room. We have the boards and adhesive. You would need to provide underlay if needed. The current flooring is yellowtongue. The room is approximately 4mx4m. Following installation of flooring we need the skirting and archs reinstalled.

2 damaged floor boards need replacing. Hardwood floors

Removal of existing hardwood timber flooring from a designated area and reinstallation in another section of the kitchen where flooring is currently missing/exposed. The work includes: * Careful extraction of timber boards from the selected area without damaging usable pieces * Preparation of the target area (cleaning, leveling if required) * Cutting and fitting the salvaged boards to match the existing floor pattern and direction * Securing boards in place and ensuring alignment with surrounding flooring * Sanding and finishing the patched section to blend with the existing floor as closely as possible Objective: Achieve a seamless and uniform appearance with minimal visible difference between old and relocated flooring.

Hi, looking someone can install floor under the wall heater we just removed. We are in hoppers crossing

Looking for an experienced floor sander to sand and finish some of the hardwood floors in a large house in Sherbrooke (Dandenong Ranges). Details: • Approx 53m² of solid hardwood flooring • Boards are 20mm thick × 82mm wide • Floors are in very good condition – they appear to have been carpeted for most of their life • Some old lacquer and paint overspray that needs sanding off • Nail holes present but nothing unusual Its a really beautiful floor and I am keen to make it right again The goal is to sand back to raw timber and I will apply a natural finish. Sand only is reuired Property access • Easy access • House currently being renovated so space will be clear • Parking on site Looking for: • Someone experienced with dust extraction sanding equipment • Clean professional finish • Happy to discuss best finish for older hardwood floors Please include in your offer: • Your price per m² or total estimate • Whether you supply materials • Photos of previous work if available Happy for someone to come inspect and quote. The rooms are large, clear and easy to work in.

Looking for an experienced floor sander to sand and finish hardwood floors in a large house in Sherbrooke (Dandenong Ranges). Details: • Approx 163m² of solid hardwood flooring • Boards are 20mm thick × 82mm wide • Floors are in very good condition – they appear to have been carpeted for most of their life • Some old lacquer and paint overspray that needs sanding off • Nail holes present but nothing unusual Its a really beautiful floor and I am keen to make it right again The goal is to sand back to raw timber and I will apply a natural finish Property access • Easy access • House currently being renovated so space will be clear • Parking on site Looking for: • Someone experienced with dust extraction sanding equipment • Clean professional finish • Happy to discuss best finish for older hardwood floors Please include in your offer: • Your price per m² or total estimate • Whether you supply materials • Photos of previous work if available Happy for someone to come inspect and quote. It will be easier than usual.

Attached if a picture of water damage

Sand back and restain in a black Japan (or similar) clear coat existing hardwood timber floor for a semi gloss finish. There are three rooms (total of 40m2) - living (4.5x4) - hallway (1.05x10) -study (3.2x3.8) To be completed.

Need 4 pieces of wood nailed One to a brick surface one to a hardwood surface, wood supplied only Should be only 15 minutes work

Water marks from dog water bowl. Shouldn't require sanding as they are new marks. Haven't tried hydrogen peroxide or other solutions as would prefer someone who has done before and not to permanently stain the flooring. Approximately 4 square metres.

Kitchen, dining, foyer hardwood floor sand and varnish.

Labour only. We have 1 damaged Baltic pine floor board which needs to be replaced. We have a spare floor board plank to replace the damaged one. Therefore the damaged plank needs to be cut and replaced with a new plank. No sanding or staining is required. There isn't any access to under the house.

Patchy adhesive on the hardboard which needs to be sanded down.

Hardwood flooring repairs need some planks replaced

Hi there, I am looking for someone experienced to restore my hardwood floor. I have just removed the carpet. The floor is in very good condition so looking to restore it. Looking for someone who can fix squeaks (if any), fill holes and gaps (if any) and sand or scrub only with Bona machine and polish with 2-3 coats. Overall area is 65 sqm approx - 3 bed and 1 living room. I am looking for labour only. I can supply all materials.

Sand, fill holes, and apply 3 layers of coating to hardwood floorboard. - size: 60 square meters (approx) - property type: single story unit - coating: water based polyurethane - location: living room, kitchen (no need to sand under cabinet, will remove toe kick), hallway, 2 bedroom, 1 closet - note: kitchen floor boards have many nail holes so require mixing sand dust with PVA glue and fill the holes in

I’m looking for an experienced flooring installer to install both hardwood flooring and SPC flooring at a residential property. Scope of works: 1️⃣ Hardwood Flooring Area: approx. 60 m² Stairs: 12 steps + 6 winders - manufacturer supplied nose but need to trim to size Board size: 910 x 125 x 18 mm 2️⃣ SPC Flooring Area: approx. 85 m² Board size: 230 x 1570 x 8 mm - Click and lock system Underlayment required to be installed underneath Stairs: 23 steps + 9 winders - Glue with edge trims - Tx t m0b more detailed O4️⃣ O2 Peter 5️⃣🎱6 Yu 92🎱 Installation areas: Ground floor – concrete slab Stairs - steps and winders (where the stairs turn) First floor – floorboards Materials: - Flooring materials and underlayment supplied by owner. - Installer to supply own tools, fixings, adhesives, and consumables Location: - Clayton - Price for reference only. Negotiable cash please. Requirements: - Proven experience with hardwood flooring and SPC flooring installations - Ability to prepare subfloors properly (levelling, moisture checks if required) - Attention to detail for clean cuts, transitions, and finishes - Trim out flooring if corner is not good - Reliable, punctual, and professional Timing: Flexible – can be discussed with the right installer

My hard wood floors need a proper deep clean and scrub/polish. Floor stains super easily just even from water so there’s a lot of stain marks and unwell cat so a lot of pee marks. Examples of marks in pics, but a lot of them. May need a sand and sealing I’m not sure how it works.