Find an experienced flooring expert in SA

Floor levelling and installing engineering floor

6.5 mm Hybrid floorboard in 3 bedrooms installation to be done 40 sq mt, including underlay, scotia and door trims.

Hi we have approximately 39 square meters of already installed ingeneered wooden floor that was incorrectly installed — it had to be glued but it wasn't. Can you provide a quote?

I need someone to remove my current floor (has laminate flooring with some carpet stickers added) and add new flooring (new laminate floor is fine) and ensure is neat with architrave trimmings. Must take all rubbish with them. Thank you

To install the skirting board of 24 meters in the city centre of adelaide

Need someone to cut and install stair nosing (x2) - i have all the materials left by the lazy ppl who laid the floors. Not a big job, but i don't have tools to sort.

Seeking a quote to install approximately 100sqm of embelton engineered timber flooring t&g. 2100x190x12mm. Concrete subfloor. We are wanting them installed using direct stick. Carpet and skirting boards will be removed by us. Please provide quotes with the glue supplies by you and without.

Lay 5 rolls 10m x 2 m- only minimal cutting at door way, otherwise simple roll out and perimeter undertaping with double sided tape (supplied by company who are supplying vinyl). It is going onto the existing sprung floor.

Install of laminate floorboards over tiles in entry to bathroom,toilet and laundry. Have the same floorboard throughout our house but have since decided to continue in these two areas. Floorboards, underlay and trims provided. Would like completed ASAP

We have began to install laminate floating flooring and have around 10m2 left to do. Unfortunately can’t find the time to complete it and wanted to get a quote for someone to come finish the task. Flooding is ready and underlay has been put in

Hi I have approx 12 squares of vinyl flooring that needs to be installed. There are some different cuts as it needs to go into a laundry and toilet

Looking for the purchase and installation of laminate bench tops in the Albert park area. Picture attached

We handle floor refurbishing, installs, polishing, and cleaning for all types. Laminate, hybrid, vinyl, and lino. We also supply and deliver products locally and offer bathroom tile and grout cleaning to keep everything looking fresh and new.

I need help with installing new floors in the upstairs area. I haven’t purchased the flooring yet, so I’d like some advice on what type (e.g. hybrid, carpet, laminate, timber, or vinyl) would be best for the space. The job will include: • Measuring and preparing the area • Installing the flooring once materials are ready • Ensuring a clean and professional finish Please include your experience and any tools required. I can provide photos or measurements if needed. Thank you ☺️

Install 30m² in total of paving to extend my driveway for parking

Need new vinyl planks (which we’ll arrange) to be laid in kitchen/dining and lounge room (total around 65 square metres)

I need skirting board replaced in a living room. One part of the board will need to have height cut shorter. Original skirtings are there ready to be used. Price to be negotiated

I need about 50 ish sqm of vinyl floors laid Existing carpet needs to be removed and disposed of and any prep if required It’s for bed 1 and walk in robe And 2 kids back bedrooms

Flooring installation for my rumpus room. The area is around 5mx4m

Please quote price per square meter to lay laminate flooring. Thanks

Looking for a quote to polish garage concrete 6m x 5.5m Adelaide West

Remove carpet from two bedrooms. Sand and apply two coats of finish. Rooms are approximately 4x4 and are furnished.

Hi, I’m looking for someone experienced in epoxy flooring to work on my garage floor (approx. 35 sqm). The floor currently has an old epoxy coating that needs to be removed. Floor needs to be polished and ground to prepare for the new epoxy. Apply a new epoxy finish

110m² brand new floor in good condition

Recently had carpet removed from 2 bedrooms Need floorboards sanded and polished to match other floorboards in house Main bedroom - floorboards in very good condition (see 1st photo) Second bedroom - 2 areas where cement needs to be removed and floorboards replaced there. Priority is to have main bedroom complete. But hoping someone has experience with removing cement and replacing floorboards before sanding and polishing. Looking for someone with experience in sanding and polishing floorboards Happy to negotiate price based on work required

Old small home, carpet has been removed leaving timber flooring to be sanded and polished. Looking at 4 rooms and a hallway which together would be approximately 35 square meters

Some patches of wood has lost color that needs restoration/polished/resending (open to suggestions). I guess those 3-4 small patches can be sanded again (Preferred) or whole floor.

Sand and Polish FloorBoard - Small Area

The job is to sand stain and polish approximately 80 m² of flooring. It’s a level one building in Port Adelaide. The floorboards are Jarrah.

Sand and polish the timber floor

Sand and polish timber floors and put down quad

Sand and Polish floorboards and fix gaps in floorboards

I've had a slate base removed from under a combustion heater and now need the exposed concrete polished to match surrounding floor.

I would like to sand and polish floors in living room and 3 bedrooms. Please send me your quote.

Just checking there is a carpet to be removed

Remove carpet, sand, polish/coat pine floorboards in room 4.3m x 4.4m

polished concrete floor poured and polished? About 20m2 . New kitchen then to be installed on top by another trade. Approximate measurements of flooring area is attached on a ruff sketch Floor base u der .. the current existing floorboards and tiles are mixed particle board and concrete.. I think..!

We just bought a new (130 year old) house in Renown Park, most of the house is floorboards but the main bedroom is carpet on top of ground that was filled in with concrete. The room is 4.32m x 3.64m. ($5 budget isn’t accurate, just not sure what ballpark we are looking at so not sure what to put.)

23m2 of new polished concrete look floors.m for freelance floor polisher. Affordable counter offers considered. As I’m on a budget. Floors will need a thin layer of new concrete poured as I think the floors are particleboard? This I’m unsure of Current floorboards and old tile will be removed beforehand and not included in this quote. $1150 is $50 square metre x 23metrs.

1 bedroom pine boards to be prepped and polished. Existing nails would need to be removed and edging around the corners. Happy to discuss what oils or treatments that are used. 3.3m x 2.65m approx.

1 bedroom, hallway and living area to be sanded. Carpet will be removed prior with wooden floors premopped. Floor boards look in good condition and clean. But some patches of glue from the carpet underlay.

Removing carpet and restoring original wood floors

Sand and polish timber floors.